SPECIAL REPAIRS TO BUILDING NO P 2 SINGLE ORS LIVING OTM ACCN AT GRN BN UNDER GE W COLABA MUMBAI

Amount

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar complete all as specified and directed.

Dismantling Battens for tiles, shingles etc, ofany size including tilting fillets exc 0.15 cm complete all as specified and directed.

Material and labour in repair to replace old decayed timber ( including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght complete all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

Fixing only in repairs in patches including cutting out old,piecing,heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed.

M & L pre-painted roof metal sheet of Mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering/Cladding to wall fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed.

S & F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, flat iron or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) complete all as specified and as directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land.complete all as specified and directed.

M&L 75 mm PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, flooring/subbase including necessary shuttering complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, & brushing neat cement slurry with 3.0 kg of cement per sq mtr etc. complete all as specified and directed.

M&L light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified.

M&L light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

Ditto all as per Item above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L machine Grinding/rubbing/polishing to Kota stone surfaces to mirror finish all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

Material and labour Granite (of any type and colur) 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in steps/floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work all as directed.

M & L for anodized aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer instruction, the main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size indicated it shall be 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturers instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size as indicated along if not indicated it shall be 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter complete all as specified and directed.

M&L for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids . Note:- Frame work for ceiling shall be measured and paid separately.)

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth(with out using extra cement. complete all as specified and directed. Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.)

Supply only integral waterproofing compound

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint) over one coat of primer complete all as per manfacturer,s specifications and directed.

M&L for preparation of Old plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint) complete all as per manfacturer,s instruction/specifications and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete .

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. .

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exc 1.50 n exc. 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm n exc 2.00 Sqm complete all as spcified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supplied and fitted to chowkhats of 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

Supplied and fitted to chowkhats of 2nd class hard wood 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F Aluminum alloy anodised sliding door bolts of 300mm long with hasp stapple and fixed complete all as specified and directed.

Taking down shutters of any description n exc. 1.00 Sqm complete all as spcified and directed.

Supply and fix for 30mm thick glazed & skelton, open rebated & prepare to receive glass/gauged etc divided in square with plain, chamferred or rounded mitred edges of framing plain, chamfered or rounded fitted with or without sash bars & metred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) supplied & fitting to chowkats using 2nd class hard wood all as specified and as directed.

S&F 75 mm butt hinges medium weight cold rolled stainless steel.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 75 mm cast type anodised

Supply & fix 3 mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding all as directed.

M&L in repair for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding all as directed.

S&F 150mm long gate and shutter aluminum hook and eyes complete all as specified an directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm cast type anodised

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.

S & F in repairs for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed)

S&F PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

M&L in repair CP Towel Rail 61 cm long complete all as specified and directed.

M&L in repair CP soap dish all as per cat part. complete all as specified and directed.

S&F as in repairs 15 mm bore angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions . all as specified and directed

S&F as in repairs 15 mm bore concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed .

S&F in repairs15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia bore complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

S & F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

S & F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and laid in trenches or fixed to walls complete all as specified and directed.(Note : upto any height and including necessary scafolding)

S&F 75mm dia PVC (SWR) bends with access doors any radius.

S&F 75 mm dia PVC (SWR) vent cowl.

M&L for gently cleaning the surfaces of the stone masonry and piers with specification water misting techniques employing air water jet using a fine nozzle sprinkling system calibration to spray fine mist along the stone surfaces without over wetting followed up by gentled surfactants and cleaning brushing with soft nylon brushes as specified, gentle surfaces cleaning may include using water misting amdmild Ph balanced surfactants as specified for indicated areas to remove surfces dirt grith surfaces accreeetions lime wash etc by means of water misting and Ph balances surfaces cleaning all as specified and directed. Note:- Quoted rate shall be inclusive of removing vegitation on wall surfaces, chajja etc and erection and dismantling of MS tubular double scaffolding up to 6 to 10 metre height and provision of necessary safety equipment to sklled works to carry out works.

M&L for raking out cement pointing or any other hard material used and careful repointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and apse domes with poor joints, in lime mortar 1:3 (1 lime , 3 sand mix to be approved by consultants before application) of size 50x15mm and filling in of any holes/damage area of stones that may have to be filled in lime mortar pointing to be carefully colour matched using additives such as kattha, sand stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour matched lime mortar for approved by Eng-in-charge. The contractor to ensure use of masking tapes and sharp specialized spatulae and tools to ensure clear lines and high level of workmanship on site all as specified and directed.

M&L for applying two coats of melamine polish on external wall clading after perpration of surface all as per manufacturers direction all as specified and directed by Engr-in-Charge

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply & fix sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exceeding 0.5 Sqm in each pane or as required complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, cassing capping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.2 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.2 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 2 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

S & F LED light fitting 1x9W/1X10W luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and Fix 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed

S & F Exhaust fan 230 volts, 250mm,metal heavy dutywith wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall.

Supply and fixing Ceiling fan complete with blades, down rods,electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC making all electric onnection. huck and suitable size rod for hanging ceiling fan complete all as specified and as directed

M & L refixing of ceiling fan (old fan) and servicing complete connecting up including fan provision of cable from ceiling rose or connector and fan Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end,dismantling romoving and hanging fan and blades and making fuctionable i .e change capacitor, condenser, fan rod 3 to 5 RM of GI pipe, winding , servicing complete all as specified and directed.

S&F in repairs LED 36 Watt 3000 K, Slim racess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed.

M & L refixing of LED batten seriviceable (old) including servicing , nut bolts , clmps for refixing complete all as specified and directed.

Supply and fixing LED security Building light LED 45 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.

Supply and fix MCB Distribution board , 240 volts single pole and neutral , single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral , single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 6 , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one.

Supply and fix in repairs MCCB DB TPN 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts complete all as specified and directed including taking down old one.

Material & Labour for Sub main wiring in repair, with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures complete all as specified & as directed by engr-in-charge Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casssing cappiing ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 35 Sq.mm 3.5core , confirming to IS specifications :-

Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm, 2 core laid through duct/ pipe / in trench etc. including cable glands & lugs complete all as specified and directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric , hot and cold water pipe, tab etc and water connection and testing after installation.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

SR Construction (BID ID -3226453)

Unity Enterprises (BID ID -3226448)

Bob Enterprises (BID ID -3226649)

SAHU AND SAHU CO. (BID ID -3231766)

ASHOK CONSTRUCTION (BID ID -3232288)

Nilesh Construction (BID ID -3226291)

DHARICHHAN ENTERPRISE (BID ID -3232410)

NATH CONSTRUCTION (BID ID -3232260)