REPAIR/REPLACEMENT OF EM INTERNAL/EXTERNAL SERVICES DG SET AND MISC WORKS AT CDA AND NCC COMPLEX PATNA PREVENTIVE AND PERIODICAL MAINTENANCE OF LIFTS FOR CDA PATNA AND RENOVATION OF EXISTING BADMINTON COURT OF MAIN OFFICE CDA PATNA UNDER GE DANAPUR C

Amount

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories on surface wiring and making good disturbed surface of wall & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box with 3mm thick plastic laminated sheet top cover etc for mounting switches, sockets, fan regulators for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

All as per item no 4 above but one bell point controlled by one bell Push

All as per item no 4 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 4 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 4 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing for switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

Supply and fixing for socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing for switch socket combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing for bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.

Supply and fixing in repair ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing in repair batten/angular fittings complete all as specified and directed.

Supply and fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing for Bell multi music type AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing in repair PVC rectangular block for mounting switches, sockets ,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm complete all as specified and directed.

All as per item no 17 above but of size 250 x 200 x 50 mm.

All as per item no 17above but of size 200 x 150 x 50 mm.

All as per item no 17 above but of size 175 x 100 x 50 mm.

All as per item no 17 above but of size100 x 100 x 50 mm

Supply and fixing in repair pressed steel terminal rectangular sunken boxes 60 mm deep for mounting, switches, sockets, fan regulator, etc. with 3mm thick plastic laminated sheet cover of size 250 x 300 x 50 mm complete all as specified and as directed.

All as per item no 22 above but of size 200mm X 150 mmx50mm

All as per item no 22 above but of size 150mm X 150 mmx50mm

All as per item no 22 above but of size 100mm X 100 mmx50mm

Supply and fixing in repair plastic laminated bakelite sheet cover of Hylam brand 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with machine screws and washer for size 250 mm X 300mm complete all as specifed and as directed.

All as per item no 26 above but of size 200mm X 250 mm

All as per item no 26 above but of size 200mm X 150 mm

All as per item no 26 above but of size 150mm X 100 mm

All as per item no 26 above but of size 100mm X 100 mm

Supply and fixing double door TPN DBs four way, 415 V of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing double door SPN DBs four way , 240 V of powder coated DB's suitable for MCB's fitted with 200 A rated bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply & fixing in repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete.

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SPN 40 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB TPN 40 to 63 amps 10 KA ,C-series, 415 V including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing LED tube light batten box type with polycarbonate housing decorative end caps with single tube 1x20 watt T8 lamps type complete with both end bi-pin holder and all accessories integrated electronic driver and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified and directed

Supply and fixing polycarbonate housing LED tube rod 18 watt CDL(6500K) 230 volt T8 type complete with electric electronic driver, Metal heat sink and bipin holder with Efficiency of 100 Lumens/W including suitable size complete all as specified and directed

Supply and fixing energy efficient LED retrofit bulb 9 Watt with wide operating voltage, BEE 3 star rating, power saving with lumen efficacy 0f 90Lm/W to 105Lm/W & B22 base caps or suitable size complete all as specified and directed

Supply and fixing Decorative LED Post top 40 Watt, IP-65 rated protection with uniform and glare free light distribution with integrated decorative pole included with holder alongwith all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified and directed

Supply and fixing in repair decorative Wall light fixture with 9 W LED lamp in a durable plastic body & designer mesh in gold finish including connection with all necessary accessories, 230 Volt complete all as specified and directed. . complete all as specified and directed

S&F recessed mounting fitting 1 x 42 watt , 2X2 Ft ultra modern design architectural LED luminaire which provides soft-light and glare free uniform illumination suitable for Armstrong / Grid Ceiling including LED driver and 42 watt lamp incl all accessories complete all as specified and directed

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 30 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

M&L for Rigid non metallic PVC casing caping ISI marked, medium grade,not less than 25 mm base size inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles hooks,couples and lock outs etc fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

Supply and fixing in repair MCCB 4 Pole, 415 V, 400 Amps with breaking capacity 36 KA suitable for Panel fitted with bus bar and connecting cable with providing lugs as per existing finishing complete all as specified and directed .

Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Icu = 100% Ics, 36 KA breaking capacity of rating 250 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make - L&T, Cat No: CM92109OOP1OG or equivalent model of Simence / Legrand

Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Icu = 100% Ics, 36 KA breaking capacity of rating 200 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make - L&T, Cat No:CM92109OON1OG or equivalent model of Simence / Legrand

Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Icu = 100% Ics, 36 KA breaking capacity of rating 100 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make - L&T, Cat No: CM92108OOL1OG or equivalent model of Simence / Legrand

Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Icu = 100% Ics, 25 KA breaking capacity of rating 63 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make - L&T, DZ1F0063DXD1A or equivalent model of Simence / Legrand

NOTE FOR ITEM NO- 50 TO 54 :- MCCB shall be replaced as per existing frame size/ Model and as per requirement of site with no extra cost.

Disconnecting and taking down of burnt winding of ceiling fans including necessary dismantling, cutting and removing of unsv windings, cleaning, segrigation of serviceable and unsv parts including re-windings of stator winding with super enameled copper wire of existing gauge and weight of approved make and brand and taping, quick heat varnishing, baking, drying in heat chamber to obtain proper insulating resistance and reassembling the fans including replacement of unsv parts and re-installation to the existing position and necessary transportation and testing complete for Ceiling Fan of 1200/1400 mm sweep of any make complete all as specified and as directed.

All as per item No56 but for Exhaust Fan of 300 mm sweep of any make

Note For item No 56 to 57 : Rates are deemed to be inclusive for collection of fan from CDA & NCC complex under contractor own arrangement, removing defective parts, burnt winding carefully, cleaning & re-assembling the fan after repair i.e. oiling, greasing, washer, lock bolts, connector, cross pin etc, reinstallation and testing complete to the satisfaction of Engineer-in-charge. (spare parts will be measured and paid seperately under relevent items)

M&L for identifying and rectifying day to day complaints of fans including taking down celiing fan / exhaust fan / Wall fan of any type / make / sweep from its location at CDA main bldg / Md accn of CDA complex, servicing of fans after removing blades, opening of fan at site and cleaning ball bearing,gun metal bush, filling grease /oil and changing of nut , screwes, check nuts, rubber reel, nut & bolts of size 15 mm to 60 mm including replacing defective condensor,ball bearing ,conecting wire,gun metal bush,lock nuts, crosspin ,ceiling rose etc if required and re-assembling of fan, blades, down rod, conopy etc and hanging back fan to its original location after cleaning of body, connecting to ceiling rose complete all as specified and directed . Note : (1) all spare i.e condenser, ball bearing,flexible wire, bush, shall be measured and paid under relevent item. (2) Cost of petty stores such as grease, lubricating oil, varnish, coil tie, lock nut , cross pin,check nuts,rubber seal etc are deemed to be included in quated rate.

Supply only Ball bearing of size 6201 (Make: NBC or SKF).

Supply only Ball bearing of size 6202 (Make: NBC or SKF).

Supply only Ball bearing of size 6203 (Make: NBC or SKF).

Supply only Ball bearing of size 6204 (Make: NBC or SKF).

Supply only fan capacitor 2.5 mfd (Make - Asian / Epcos / Usha).

Supply only fan capacitor 4 mfd (Make - Asian / Epcos / Usha).

Supply only Twisted twin core flexible cable of size 24/0.0076 .

Supply only Gun metal bush for ceiling fan of any size.

Supply only Gun metal bush for exhaust fan of any size .

M&L for spray painting of ceiling fan 1200/ 1400 mm sweep with synthetic enamel paint including filing cavities with filler after cleaning of body, blades, down rods etc by scraping with emery paper including rewriting MES No of fan of letter size 2 cm height, using black paint complete all as specified and directed .

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed .

Ditto----as per item No. 70 but of steel metal body and size of 300mm sweep

Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep, speed-1350 RPM, 55 Watt and grouting with nut , bolts & Fastener on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed . Make: Havells/Bajaj/CG/Philips.

Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 60 Watt 240 volts AC 50 Hz , IP 65 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make : Havells/Bajaj/Crompton/Philips.

Supply and fixing LED flood light luminaires 120 Watts IP 65 type with lens incl standard fittings pressure die cast aluminium housing with heat reistant toughened front glass housing with epoxy powder coated finsh and , complete with control gear box and all accessories duly prewired and connecting to junction box and testing complete all as specified and as directed. Make : Havells/Bajaj/Crompton/Philips.

M&L for maintenance/servicing of water cooled DG set of capacity 110 KVA,Make:Cummins. capacity coupled with alternator, maintenance and servicing mechanically and electrically, including cleaning, oiling /greasing, removing & replacement of diesel filter /oil filter /Air filter /fan belt /fuel pipe/ engine oil pipe /Engine Oil/Coolent etc as required at site and as per manufacturer's instructions and checking of valves & nozzles etc, and making DG set perfectly operational and testing complete all as specified and directed. Notes:- (i) Any Overhauls, Modifications, Job Work like repair/recalibration of FIP & Injector, Self Starter, Radiator, Turbo charged after cooler, B.C alternator etc. will be outside the contract and the same will be carried out at extra cost. (ii) All items such as cleaning agent, Cotton Waste and grease etc are required for carrying out the normal maintenance of the engine will be included in the quoted rate. (iii) Fresh engine oil/spare parts for DG sets shall be supplied by the contractor as “ Supply only” and shall be measured and paid separately under item of this BoQ.

Supply only spares parts for DG Set Diesel Engine generating set of 110 KVA capacity (Make: Cummins, Model: AL615TAG2), Fuel filter , Make: Cummins

All as per item No. 76 but Piston assembly.

All as per item No. 76 but Set of Piston ring.

All as per item No. 76 but Valve seat Intake.

All as per item No. 76 but Valve seat Exhaust.

All as per item No. 76 but Valve insert.

All as per item No. 76 but Valve Guide stem.

All as per item No. 76 but connector female.

All as per item No. 76 but bearing connecting rod.

All as per item No. 76 but CR bush.

All as per item No. 76 but upper gasket kit.

All as per item No. 76 but lower gasket kit.

All as per item No. 76 but Fuel filter.

All as per item No. 76 but lub oil filter.

All as per item No. 76 but super by pass filter.

All as per item No. 76 but Air filter Inner.

All as per item No. 76 but Air filter Safety.

All as per item No. 76 but Fuel pipe set

All as per item No. 76 but oil pipe set

All as per item No. 76 but Injector cup

All as per item No. 76 but water line hose kit

Supply only lubrication oil SAE-40 (20W- 40 grade) suitable for Diesel Engine of any capacity drained out / filling under this BoQ complete all as specified and directed. Note: Lubrication oil make used as per recommendation of DG set manufacture. Make: Make: Leypower/Cummins /Indian Oil.

Supply and topping up of Ethylene Glycol Coolant. Make: Kirloskar/Cummins/Greaves Cotton.

Supply only electrolyte 1250 for lead acid battery. Make: As per sample

Supply only distilled water. Make: As per sample

Dismantling and taking out the radiator fitted in 180 KVA capacity of DG sets and strip opening complete radiator assembly,for servicing mechanically and proper cleaning of tubes with using de-scaling solution, including repair of water tubes and top/ bottom tanks by soldering / gas welding of leakage of tubes/tanks including replacement of gaskets, nuts, bolts,etc ensuring perfectly leak proof after servicing of radiator, re-assembling and fixing the same in position and testing the system complete all as specified and directed . Notes :- (i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of this BoQ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, gaskets/ packing etc. (iii) The quoted rates of contractor are deemed to be included cost of transportation.

All as per item No.101 but for 110 KVA DG set of Make: Kirloskar Bliss/Kirloskar.

Dismantling and taking out the fuel pump system including injectors assembly fitted in 180 KVA capacity of DG sets and strip opening of fuel pump system for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and calibration of Fuel Injection after repair/ servicing /overhauling and re-assembling and fixing the same in position and testing complete all as specified and directed . Notes :- (i) Repairs/servicing / reassembling and testing of Fuel injector pump shall be carried out through the authorised service center on testing machine. (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. (iii) The quoted rates of contractor are deemed to be included cost of transportation.

Dismantling and taking out the fuel pump system including injectors assembly fitted in 110 KVA capacity of DG sets and strip opening of fuel pump system for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and calibration of Fuel Injection after repair/ servicing /overhauling and re-assembling and fixing the same in position and testing complete all as specified and directed . Notes :- (i) Repairs/servicing / reassembling and testing of Fuel injector pump shall be carried out through the authorised service center on testing machine. (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. (iii) The quoted rates of contractor are deemed to be included cost of transportation.

Dismantling and taking out all burnt windings from Armature, Main field, stator field and armature complete assembly fitted in 110 to 180 KVA DG Sets and M& L for rewinding of alternator with super enameled copper wire of existing gauge size and turns and makers specifications including all associated insulating material such as separator and heat varnishing etc including both inner and outer bearing of existing size and model, after complete repair of alternator re-assembling and refixing the same in position including testing complete all as specified and directed.

Dismantling and taking out the self starter,12 Volt DC fitted in 110 to 180 KVA 3 phase 50 HZ of DG sets and strip opening of Self starter 12 Volt DC for carrying out repair/ servicing /overhauling mechanically,cleaning,oiling/greasing/varnishing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and re-assembling of Self starter after repair/ servicing /overhauling and fixing the same in position and testing complete all as specified and directed . Notes :- (i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. (iii) The quoted rates of contractor are deemed to be included cost of transportation.

Supply and replacing and fixing of Battery charger 6 to 24 volts 180 AH suitable for charging of battery consisting of two terminals positive (+) and Negative (-), charging meter and charging terminal lead positive and negative including 4 Nos Crocodile clips and 3 Core copper flexible connecting lead with 15 A plug top, incl testing complete all as specified and as directed by Engr-in-charge. Make- Kamal/ Microtek.

S & F Busbar chamber of size 300 X 300 X 200 mm cubical made out of 2mm thick CRCA sheet with front door opening and locking arrangemet with 4 nos Aluminium busbar of 200 amps and fixed with insutator including support /hole fast made out of 40 x 40 6 mm MS angle iron and fixing arrangement on wall / floor with necessary PCC including provision of cable entry & exist from botom and complete painting all as specified by Engr in Charge

S & F change over switch 100 Amp 3 phase, 440 Volt, AC with enclosure complete

S & F change over switch 200 Amp 3 phase, 440 Volt, AC with enclosure complete

S & F change over switch 250 Amp 3 phase, 440 Volt, AC with enclosure complete

M & L for synthetic insulating rubber mat of size 2 m x 1m x 25 mm with ISI mark suitable for 11 KV rating in red colour complete all as specified and directed

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable including taking out old bricks from trenches and separating serviceable bricks and set aside for reuse complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx15cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Supply laying and testing cable XLPE HT insulated screened PVC bedded galvanised steel strip ot wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 Volts grade of size 3 core 95 Sqmm.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 50 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: HAVELLS/ POLYCAB/MESCAB) (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this BOQ

All as per ser item No 119 above but of cross sectional area 25 sqmm 3.5 core

All as per ser item No 119 above but of cross sectional area 16 sqmm 4 core

All as per ser item No 119 above but of cross sectional area 10 sqmm 2 core

M&L Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of GI strip 32X6mm size by means of steel bolts,nuts, check nuts and washers test points made of GI strip 40X8mm, 10 cm long , PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion.

M & L for Painting of steel pole with cross arms, clamp of any length and shape for HT / LT overhead line with two coat of aluminium paint including preparation of the existing surface including marking pole numbers in a 20 cm dia yellow circle & marking three black & two yellow bends width 30 cm by fluorescent paint, from bottom of pole to 1.5 Mtr height, complete all as specified and directed.

M & L for Painting of transformer complete with radiator of capacity up to 150 KVA 11/.433 KV outdoor type with two coat spray painting with synthetic enameled gray paint after preparation of transformer surface & marking SM No on surface of transformer complete.

Supply & fix lightening arrestor linear resistance type complete with all fitting,distribution class suitable for 11 KV system pole mounting type conforming to IS - 3070 Part-I including taking down existing lightening arrestor complete all as specified and as directed.

Supply and fixing post insulator porcelain viterous brown suitable for 11 KV complete all as specified and as directed

Supply and fixing Pin type insulator, porcelain, vitreous, white, brown or green insulator, suitable for 11000 volts grade including taking out of unsv one complete all as specified and as directed. Make -PACTIL / MADRAS PORCELAIN / NGEF / JAIPURIA / BHEL .

Servicing / Calibration to 11KV HT VCB/RMU panel complete including the following (a) Taking out 11KV HT VCB of 630 Amps rating trolley from HT Panel after switching off electric supply.Checking of mechanical system for proper functioning of upward/downward movement of HT VCB trolley including replacing closing buffer, triping buffer (VMX type), VI connection gap check, motor coil resistance check, closing coil resistance check, spring charging cut off switch check, aux switch check, NO-NC states check, trip coil resistance check, testing details, timing test, oil value test, breaker timing test, connector resistance test, IR value test, HV test, mechanical and electrical mechanism check, counter reading check, shock observer check, pre close/ post close circuit check, test and service position limit switch check, breaker drive screw operation check, trip coil assemble operation check, mechanical latch . Cleaning & servicing the fixed/ moving contact & blowing out dust and applying the proper lubrication/ greasing and reassembling the VCB including connection to HT panel complete to be replaced where reqd all as directed by EIC. Note:- (1) Maitenance of all HT VCB will be carried out as per maintenance schedule (2) Testing of above job to be carried out by engineers of authorised dealer/service centre. (3) Replacing new items shall be measured and paid separately as supply only.

Supply only shunt closing/tripping coil operated on 110 /30 volt system suitable for working of relay of HT SF6 / VCB complete all as specified and directed.

Supply and fixing in repairs spring charging motor suitable for fixing with 33/11 KV indoor type VCB panels complete all as specified and directed. Make - MICO/ABB/C&S/L&T.

S&F digital earth fault and over current relay in respective make, in existing 11/33 KV panel complete all as specified and directed. (Make Crompton/ L&T nX series MC61A cat MC61ANX2200)

Supply and fixing in repairs vaccum interputer suitable for 11 KV VCB trolly complete all as specified and directed.

Supply and fixing in repairs moving contacts of VCB made of copper and suitable for 11 KV VCB Trolley compete all as specified and directed.

Supply only meter devices 3 phase digital type Amp meter 0- 120 Amp class 0.5 of size 96 mmx96 mm to match the ratio of existing CTs. Make: Conzerve Cat No DM 3258 or equivalent model of IMP/AE Bombay/Meco.

Supply only meter devices 3 phase digital type Volt Meter 0- 12 KV class 0.5 of size 96mm x 96 mm to match the ratio of existing CTs. Make conzerve Cat No DM 3256 or equivalent model of IMP/AE Bombay/Meco.

Supply and fixing in repalcement of heavy duty breather assembly with Silica jel cristal complete for Transformer upto 300 KVA complete all as specified and as directed.

Supply and replace of silica gel crystal complete all as specified and as directed.

Repair / Servicing / maintenance of transformer 11 / .433 KV indoor / outdoor type , plinth / pole mounted type including the following work services :- (a) Disconnecting transformer from electric system and providing electric power to user from alternative arrangement including taking out from existing position . (b) Decanning of transformer oil , opening top cover , disconnecting of all internal connections , lifting and taking out of core assemble , LT / HT bushes, Tap changer etc ,cleaning and inspection of core and winding , segrigetion of serviceable and unserviceable items , removing of sludge and cleaning tank and cooling pipes / fins /tanks with pressure water and drying the tank complete. (c) Replacinig unserviceable LT / HT bushing by replacing rubber / cork oil seals and damage terminal rod & replacement of Transformer cover gasket of rubber cork sheet.(d) Re installation of TFR including reassembling of core / winding assebly complete including replacement of unsv parts , repair the defective parts and tighting of all loose / sparks wire / nut bolts etc and refixing the to the existing position , connecting with HT/LT cables and earthing strip and testing complete including necessary Transportation ( If required ) to the work shop and back and including Dehyderation and refilling of existing or new transformer oil of required quantity . NOTE :- (i) Dehydration of oil and new Transformer oil shall be measured seperately . (ii) Transportation of TFR measured and paid seperately . (iii) HT & LT Busing , Tap Changer will be measured & Paid separataly. (iv) In case HV / LV Winding found damages then Contactor shall be made serviceable with new winding and the same will be measured and paid seperately. (v) The rate of cork sheet & Packing Material for following cap of TFR are included in coated rate of transformer capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer HT bushing porcelain with copper stud, nuts, bolts, washers, gasket, oil seal suitable for Indoor typeTransformer of capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer LT bushing porcelain with copper stud, nuts, bolts, washers, gasket, oil seal suitable outdoor / Indoor typeTransformer of capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer Off load Tap changer switch of existing model / type of Transformer of capacity 100 to 160 KVA .

M&L for Dehydration of transformers oil minimum three cycles to achieve dielectric strength up to 50 KV in 2.5 mm gap electrode including toping up of Transformer oil if required at site . Note: (i) Dehydration of transformer oil shall be carried out at site and contractor shall take the testing result before and after dehydration of oil and show to the EIC at site and maintain necessary documents for record . (ii) Dehydration Machine with all T&P & Transformer oil testing machine for dehydration of Transformer oil and necessary transportation for the machines shall be arrange by contractor . (iii) Oil required for topping up of transformer will be measured & paid separatly.

Supply and topup of transformer oil EHV as per IS 335 of 1993 Part II with dielectric strength up to 50 KV in 2.5 mm gap electrode complete and including necessary transportation complete all as specified and as directed.

Removing of existing damage insulating material from LV Winding , Cleaning the winding and reinsulating the LV Winding with approved grade and make of insulating paper and heating the coil in the heat chamber to obtained desired result of insulating resistence complete and re-installation complete all as specified and as directed.

M & L for rewinding of transformer HV coil with super enamelled / paper coated copper wire of existing gauge including all associated insulating material such as separator etc complete varnishing, heating including dismantling of top cover, decanting transformer oil, storing the same in suitable container,disconnection live part, dismantling of bushing, lifting of core Assey, checking the windings, cleaning of cooling tube, conservator and all internal connection after all necessary repair work and rewinding, assemble the complete transformer and refilling after necessary filtration including all internal connection etc of any type / capacity transformer. Note : Filtration of oil, insulator, spindle and gasket etc shall be measured and paid separately.

M & L for rewinding of transformer LV coil with super enamelled / paper coated copper wire of existing gauge including all associated insulating material such as separator etc complete varnishing, heating including dismantling of top cover, decanting transformer oil, storing the same in suitable container, disconnection of live part, dismantling of bushing, lifting of core Assey, checking the windings, cleaning of cooling tube, conservator and all internal connection after all necessary repair work and rewinding, assemble the complete transformer and refilling after necessary filtration including all internal connection etc of any type / capacity transformer. Note : Filtration of oil, insulator, spindle and gasket etc shall be measured and paid separately.

Taking up or down (from wall/trenches/floor) existing GI steel tubing and connections, including cleaning for re-fixing or removal to store of following sizes:-

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Fixing only GI steel tubing and connections in new or old position including cleaning internally and externally, any grade / make in trenches / wall / floor / ceiling including all type of new GI fittings i.e. sockets, Tee union elbow etc all as specified and directed of following size:-

80 mm bore GI pipe

50 mm bore GI pipe

40 mm bore GI Pipe

25 mm bore GI pipe

20 mm bore GI pipe

15 mm bore GI pipe

Supply, fixing & laying only GI tubing light grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size

80 mm bore GI pipe

50 mm bore GI Pipe

40 mm bore GI Pipe

25 mm bore GI pipe

20 mm bore GI pipe

15 mm bore GI pipe

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in for following size:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Supply and fix cast iron flanged sluice valve of class 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel 80 mm bore all as specified and directed by EIC including taking down old unserviceable sluice valve

M & L for taking down burnt Submersible pump motor set make Kirloskar capacity 7.5 HP from the existing Pump house, its complete copper winding alongwith proper testing and reinstallation at respective site complete all as specified and as directed by Eng-in-charge. Note : Transportation of Submersible pump should be totally bear by the Contractor.

Painting of Panel board, 2xCentrifugal pump set make Kirloskar capacity 7.5 HP, including all connecting GI pipe and lines for two coat of synthetic enamel painting all as directed by Engr-in-charge.

Supply and Fixing Flat submersible copper cable 4 Sqmm 3 core to power submersible pump all as specified and as directed.

Supply and fixing DOL water pump starter for 10 HP/7.5 KW pump in powder coated sheet enclosure type 415 V, 50 HZ, 3 phase overload protection IP-54 protection

Preventive and Periodical maintenance of passenger lift of OMEX make 02 (Two) nos. 13 passengers lifts in reliable, safe and efficient operating condition by regularly examine, lubricating and adjust the equipment and carry out planned maintenance in a systematic and controlled manner using techniques and expertise for components such as machine, worm gear, thrust bearing, drive sleeve bearing, break contact, linings and components , motor winding, rotating elements, bearing, coils resistance for operating motor circuits, magnet frames and other mechanical parts, controller, leveling devices, relays, Solid state components eg. PCBs, transducers, resisters/ contacts, leads mechanical and electrical driving equipment, governor, governor sleeve, shaft assembly, bearing/contacts and governor jaws, car and hall mechanical buttons, car and hall position indicators, hall lanterns, car direction indicators and all other car and landing signal fixtures deflector, car and counterweight guide rails and buffers, top and bottom limit switches, governor tension sleeve assembly, car counterweight and counterweight guide shoes including rollers or gib interlocks on hoistway door hanger, guides, automatic power operated door operator, car door hanger, car door contact, safety shoe, load weighing equipment, car frame, car safety mechanism and platform, battery operated emergency light and alarm system wiring of all equipment & accessories, vibration material, reverse phase relay, indicator and digital group indicator panel with microprocessor including cleaning of lift cabin's wall surfaces by using sand ballesting emery paper including polishing complete for under mentioned, lifts excluding cost of materials but including labour replacement and re-fixing of items. Note :- Replacement of Defective parts shall be measured and paid under supply only under Sch " A" item No . 182

Preventive and Periodical maintenance of goods lift of OTIS make 01 (one) no. goods lift in reliable, safe and efficient operating condition by regularly examine, lubricating and adjust the equipment and carry out planned maintenance in a systematic and controlled manner using techniques and expertise for components such as machine, worm gear, thrust bearing, drive sleeve bearing, break contact, linings and components, motor winding, rotating elements, bearing, coils resistance for operating motor circuits, magnet frames and other mechanical parts, controller, leveling devices, relays, Solid state components eg. PCBs, transducers, resisters/ contacts, leads mechanical and electrical driving equipment, governor, governor sleeve, shaft assembly, bearing/contacts and governor jaws, car and hall mechanical buttons, car and hall position indicators, hall lanterns, car direction indicators and all other car and landing signal fixtures deflector, car and counterweight guide rails and buffers, top and bottom limit switches, governor tension sleeve assembly, car counterweight and counterweight guide shoes including rollers or gib interlocks on hoistway door hanger, guides, automatic power operated door operator, car door hanger, car door contact, safety shoe, load weighing equipment, car frame, car safety mechanism and platform, battery operated emergency light and alarm system wiring of all equipment & accessories, vibration material, reverse phase relay, indicator and digital group indicator panel with microprocessor including cleaning of lift cabin's wall surfaces by using sand ballesting emery paper including polishing complete for under mentioned, lifts excluding cost of materials but including labour replacement and re-fixing of items. Note :- Replacement of Defective parts shall be measured and paid under supply only under Sch "A" intem No .182

Supply only the following parts to incorparate to the ser no180 & 181 above.

Microprocessor card

Single phase preventer

Induction card

Push Button switch

Gate lock complete set

Gate lock fix contact

Gate lock moving contact

Reed switches

Air cod

Door shoe

Door hanger roller

Travelling cable 12 core .75 S9 mm

Door sensor full length

Door drive

Rectifier card

Steel wire rope 13mm dia make ; Usha martian

Brake liner

Car guided shoe

M & L of MS clamp made out of 40x40x6mm angle iron of approx length 150mm for strengting of existing guard rail of lift including drilling to the wall and position of fastener for the fixing clamp including necessary PCC and making good the disturted surfaces.

Supply & fixing anti vibration pad with suitable size of MS nuts, bolts, washers, packing etc suitable for lift machine including readjustment of exiting MS foundation channel as per site requirement and cutting & refixing of MS angle/flat etc complete all as specified and directed.

Excavating hard/de-nse soil in post hole (or similar holes) each n.ex 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface.

M&L for cement concrete type B-2 1:2:4 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as spd and directed.

S&F MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by E-in-Charge.

S&F Factory moulded and Factory painted galvalume aluminium Galvanized with minium of 120 GSM of on one side of the semi-corrugated GI based steel sheet 0.50mm thick of approved colour having tensile strentth of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by E-in-Charge

M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed.

VAISHNAVI CONSTRUCTION