Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹8.8 L+₹33,950 (4.02%)Rejected-Finance GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹8.8 L+₹35,560 (4.21%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹9.2 L+₹80,023 (9.47%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹9.5 L+₹1.0 L (11.9%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹8.8 L
EMD Value
₹17,700
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR AND MAINT TO FLOORING, JOINERIES, PLASTERING, FLOORING KITCHEN AND BATH FITTINGS ETC. IN HQ CAMP AND SIG UNITS OF HQ 10 SECTOR RR UNDER AGE (I) CIF (K).
2023_MES_599069_1
CA NO. AGE (I) CIF (K)-27/2023-24
Open Tender
Civil Works
Item Rate
180 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹17,700
Yes
18 Jul 2023
27 May 2023
19 Jun 2023
27 May 2023
17 Jun 2023
10 Jun 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, 75mm thick, as in sub-base of floor/path etc. finishing surfaces even and fair, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.
Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.18sqm, but not exceeding 0.38sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Glazed ceramic tiles, coloured, of size 350mm x 250mm/450 mm x 350mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Chequered cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm (2.5Cm) thick (Glosy finished) set, jointed and pointed in neat cement slurry in floors,with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
Vitreous China, wash hand basin, flat back white of size 550mm x 400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, 32mm dia PVC waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 60cm long, fixed in repair, complete all as specified and directed by the Engineer-in-Charge.
Grating square 100 mm size of PTMT (Minimum weight 100gms), fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms, complete all as specified and directed by Engineer-in-Charge.
PVC connection 15mm size with PTMT nuts of length 600mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Bib taps, 15mm bore, cast copper alloy, chromium plated, with crutch or butter fly handle, screwed down, screwed for iron pipe, or brass ferrule and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Stop valves 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Ball brass valves, 15mm bore, high pressure,with polythenefloat and flynut complete, screwed for iron pipe or brass ferrule and fixed, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Brass CP wall/basin mixer,15mm bore, for mixing hot and cold water screwed down for iron pipe and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
PVC waste pipe suitable for 32mm bore waste coupling fitted to WHB (half or full threaded), fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
PVC flexible waste pipe suitable for 32mm bore waste coupling fitted to Urinals (half or full threaded), fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Gun-metal, globe or gate valves, 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Gun-metal, globe or gate valves, 15mm bore, with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections, 15 mm bore, including cleaning for refixing, complete all as specified and as directed by Engr-in-Charge.
Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed by the Engineer-in-Charge.
Taking up or down steel tubing and connections, 20 mm bore, including cleaning for refixing, complete all as specified and directed by the Engineer-in-Charge.
Steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed by the Engineer-in-Charge.
Lagging to pipes of 15 mm bore, used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg /cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, covering with 0.01mm aluminium foil, complete all as specified and as directed by the Engineer-in-Charge.
Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Sink without drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 495 x 420mm with bowl size 410 x 330 x 160mm, fixed in repairs, complete all as specified and asdirected by the Engineer-in-Charge.
Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, fixed in repairs, complete all as specified and asdirected by Engineer-in-Charge.
Bib tap 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms), fixed in repairs, complete all as specified and asdirected by Engineer-in-Charge.
Pillar taps, 15mm bore, of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fixed in repairs, complete all as specified and asdirected by Engineer-in-Charge.
Stop valve 15mm bore of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms), fixed in repairs, complete all as specified and asdirected by Engineer-in-Charge.
Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified and directed by the Engineer-in-Charge.
Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern, fixed in repairs, complete all as specified and directed by the Engineer-in-Charge.
Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, fixed in repairs, complete all as specified as directed by the Engineer-in-Charge.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.
Plain, solid straight chowkats,and frames, made of 2nd class soft wood (Kail) wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed , complete all as specified and as directed by the Engineer-in-Charge.
Plain framed , panelled shutters (any numbers of panels), 35mm thick, made of 2nd class soft wood (kail), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowkats, complete all as specified and as directed by the Engineer-in-Charge.
Glazed and skeleton shutters, 30mm thick, made of 2nd class soft wood (kail) open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a) for doors etc are provided with stiles and rails, complete all as specified and as directed by the Engineer-in-Charge.
Mild steel galvanised wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, ccomplete all as specified and as directed by the Engineer-in-Charge.
Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Dismantling timber scantling 40 Sq cm and over in section in any position, unframed work, complete all as specified and as directed by the Engineer-in-Charge.
2nd class soft wood (Kail) as in scantling, clean sawn timber, fixed in framed work, complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification & drawings shown in SSR Part-II,, complete all as specified and as directed by the Engineer-in-Charge.
Factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on the back face with particle board core, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete all as specified and as directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked) ,complete all as specified and as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200 mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium handle, cast type, anodised, 150 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified and directed by the Engineer-in-Charge.
Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.
Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-Charge
Rendering 10 mm thick on fair faces of brick or on concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk white, complete all as specified and as directed by Engineer-in-Charge.
Preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by the Engineer-in-Charge.
Sheet glass 4mm thick ordinary quality and glazing with oil putty/pins/spring pins or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified as directed by the Engineer-in-Charge.
Preparation of new or previously untreated wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified as directed by the Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.
Galvanised, corrugated mild steel sheeting, 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.
Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by the Engineer-in-Charge.
Veneered decorative plywood , grade 1 ( with BWR resin ) with decorative face veneers on both face, 6mm thick as in ceiling, lining; fixed with nails to timber frame work, complete all as specified and directed by the Engineer-in-Charge.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.
Toilet paper holder box type , complete all as specified and as directed by Engineer-in-Charge.
Soap dish, vitreous China white, approximate size 160x 160x 90mm any type, fixed to plugs with chromium plated brass screws, fixed in repaires, complete all as specified and as directed by the Engineer-in-Charge.
Dismantling of water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, complete all as specified and directed by the Engineer-in-Charge.
Rotational moulded polyethylene water storage tanks of capacity 1000 litres three layered (Cylindrical vertical with closed top) hoisted and fixed in position including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Part-I, including 20mm dia ball brass valves, high pressure, with polythene float and flynut, complete all as specified and directed by the Engineer-in-Charge.
Note :- An amount of Rs. 26,632.50 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
JK BUILDERS AND ENGINEERS
M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR
M/S Choudhary Jalaldin
M/S SHIMAR STAR GLACIER
YATTOO ENTERPRISES
M/s KASHMIR BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .