SPECIAL REPAIR TO BLDG NO CBS-01A (COOK HOUSE) OF 92 MED REGT AT SRC LINES AND PROVN OF INTERLOCKING PATH (04 X COOK HOUSE / BACKSIDE) IN BLDG NO P-250 A1 TO 3 OF 18 MED REGT UNDER GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified & directed.

M&L old size brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.

M&L old sizebrickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed. Note :- Old bricks shall be re-used under this item after cleaning.

Demolition of cement concrete of ground floor n exc 15 cm in thick in any position nototherwise specifically provided for complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 -8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm thick screed ded in CM 1:6 complete all as specified and directed.

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over & including 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 8.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet In roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed.

Dismantlinq timber scantlinqs 40 sq cm and over in section in any position complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L preparation of new steel surface of any description and applying two coat of synthetic enamel over one coat of red oxide primer over 10cm width or girth complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, includina cover fillets complete all as specified and directed.

Supplied and fixed Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions and directed.

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and oointed in any mortor etc complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified and directed.

M&L factory made steel gauged shutter shall be made out of U Frame 35x35x5mm and 25x25x5mm sqm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coals of synlhelic enamel paint over a coat of red oxide as shown on drawing all specified and directed by Engr-in -charge.

S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M & L Steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete induding hinges. Handle tower bolts stops, lugs etc all as shown on drawing. Note :- (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangery as shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F Mild steel sliding bolt 300mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts. four on bolt plate and two on staple plate complete all as specified and directed.

S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm long complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and includina a coat of pink primer (by spraying) complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) complete all as specified and directed.

S&F aluminium anodised bareel tower bolts 150mm long, of extruded section complete all as specified and directed.

S&F heavy weight mild steel butt hinges 100mm in size complete all as specified and directed.

S&F mild steel 150mm size helical door spring induding roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all as specified and directed.

M&L For preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed

M&L for 1 coat of prime using roller complete all as specified and directed.

M&L preparation of new steel surface of any description exc 10 cm width or girth and applying two coat of synthetic enamel over one coat of red oxide primer over 10cm width or girth complete all as specified and directed.

M&L for Two coat of OBD and 2mm two coat putty using roller for painting complete all as specified and directed.

M& L preparing plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

All as per Sl Item No.46 above but 20 mm bore pipe complete all as specified and directed.

Supplying and laying of CPVC 16mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed.

S&F triple layer white color 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repair CP brass soap dish complete all as specified and directed.

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste pipe complete all as specified & directed.

Supply and fix 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste & rain water pipe complete all as specified & directed.

Supply and fix PVC (SWR) bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed.

S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays! Each including bolts and nuts and securing ends of stays to wall or roof suitable for 75/110 mm bore pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

S&F 15mm dia chromium plated fancy type wall mixer for mixing hot & cold water! screwed, fixing and connection to pipes complete all as specified and as directed.

S&F (in repair) brass chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls.ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S & F Harison rails curtain rod mild steel chromium plated with fixing brackets stops\,rollers and ring complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Treatment of soil under existing floors using emulsion@ one litre per hole, 300mm apart! including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified and directed.

Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and directed.

M&L for dubbing out average 20mm thick on irregular faces of walls in CM 1:4 complete all as specified and directed.

Material & Labour for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green complete all as specified and directed. Note :- WPC will be measured and paid seperately as supply only rate.

Cutting grooves in brick/ concrete wall 75 mm wide and 65 mm deep and shaping horizontal face of groove and making good disturbed surface in CM 1:3 after inserting APP membrane (Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

M&L galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F for frarmed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other coveing Doors, etc, to be prepared for hanging or sliding with and incuding either hooks and hinges or steel hanging door fittings (excusive of steel, sheeting or other covering. running rails and guides) and hanging. also fastening and fuxing complete conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F provide precast cement concrete louvers and jalies 25mm thick (measured solid) |including all mould all mould but excuding frame (pre cast frame shal be measured |separatly and paid ) with cement mortar 1:4 complete all as specified and directed.

M&L for 18 -20mm thick black granite machine cut bul nosed polished (table rubbed and polished) as in jambs, window cills. cooking platform and the ike otc in cement mortar 1.4 including pointing in white cemernt (1 2) using marbie dst and admature of pigment to match with shade of stone including rubbing and pclishing over and incuding 10 mm thick rendering in cement mortar 1 4 incuding rounding of edges making hoie for pipe complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for pcc 1:3:6 type C1 (using 20mm graded stone aggagate) as n bed brcks coping etc including weathering slightly rounded or chamtered angies and throating mang grovves for fixing of man hole cover including necessary forrn work complete all as specified and directed.

M & L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for chequered cement concrete colour tiles glossy finish sze 300mmx300mmx25 mm thick, with colour pigment, set jointed and pointed in neat cement |slurry over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft / loose soil complete all as specified and directed.

Removal of excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 m above or below the starting point complete all as specified and directed.

Material & Labour for cement conerete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M&L 60mm thick PCC tile (interlocking tiles) with grey cement and pigment, any shape & size conforming to IS-15658-2006, M-35 Gde interlocking tiles joints filled with sand and compacted with mechanical plate vibrator complete all as specified and directed. Note :- Sand cushioning shall be measured & paid seperately.

M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n.exc 25mm thick complete all as specified and directed.

S&F pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One fan/Exaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per serial item No 106.03 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fix in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.

Supply anfd fixing LED lamp 9/10 watt complete all as specified and directed.

Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing 1X36W/40W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.

S&L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 35 sqmm 3.5 core laid in trenches, pipe as on pole complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct 8 cm thick before laying the cable and 15 cm thick after laying the cable. After punning the thickness of said cushioning shall be 18 cm complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.

Supply & Laying GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in -charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

supply and fixing Exhaust fan Steel body with louver and fixing accessories 230 Volt and 450mm sweep complete all as specified and directed.

Supply and fixing fan ceiling complete with Regulator blades, down rods,and accessories ,230V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as direced.

Supply and fix Water heater storage type steel body and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected by Engr-in-charge.

Punit Jain (BID ID -3306665)

MUNI RAM (BID ID -3309585)