Gram kolhaii sahaswan marg se kariyapur main road tak lepan kary

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site spreading grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5

Providing, laying, spreading and compacting stone aggregates of 45-63 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of 22.4-53mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Laying brick edging on both side of road of first class brick 8 cm wide and 12 cm deep laid with mud morter including labour and supply of brick SOR No-765

Providing and applying primer coat with Bitumen emulsion (SS0-1) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70-1.0 Kg/Sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with Bitumen VG-10 using presser distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 508)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectiorising glass bends @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface to be level T & P etc. required for proper completion of the work as per MORTH and H specification 2001 No 800 complete

Reinforced cement concrete M15 grade KM Stone with fixing painting and printing etc. including of all work