REPAIRS TO TRADE PATTERN FURNITURE ITEMS, BED HARD STEEL/WOODEN CHARPOY MS/TP, CHARPOY GI PIPE PLY TOP AT MIL STN JAISALMER AND REPAIRING AND REPAINTING OF STEEL AND WOODEN FURNITURE AT MIL STN POKARAN UNDER GE (A) JAISALMER

Amount

Chair Varandah (FD-256)

M&L for removing of wornout U/S cane/Nylon newar of chair varandah and one coat of synthetic enamal paint white after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified and directed by Engineer-in-charge.

M&L for recanning with new standared 3.5 mm wide white plastic cane of semi circular type in mat pattern and all as directed by Engineer-in-charge.

Chair Varandah Godrej (FD/E6/MAP/11)

M&L for one coat of synthetic enamal paint black after preparation of old painted surfaces by applying sand paper and primer where ever required and all as specified and directed by Engineer-in-charge.

M&L for removing of old/broken flat iron from existing Chair Verandah steel and S&F new flat iron 38 x 3 mm of required length shall be welded with seat/Back of chair verandah Steel complete all as specified and directed by Engineer-in-charge.

Charpoy GI Nylon Newar/Charpoy GI Ply top {FD-220 & FD-220 (R)}

M&L for removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade incl threading both sides all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail retervied from ser item No 3.01 above incl threading both side & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy and making leg from old u/s short rail retervied from ser item No 3.02 above incl threading, S&F 6mm MS plate in bottom and 25 x 3mm of MNF clamp (2 Nos each leg) to be welded with legs & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old broken/damaged check nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge

M&L for removing old broken/damaged GI elbow 3 way 32 mm bore and S&F new GI elbow 3 way 32mm bore (ISI marked) to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge.

M&L Stiffener 25x25x5 mm thick angle iron of size 900 mm long to Charpoy GI pipe including removing/ taking out old broken/ damaged stiffener all as specified in drg & directed by Engineer-in-charge.

M&L for tightening of loose charpoys after removing of US plywood from existing GI charpoy and S&F of New 12mm thick plywood, ISI Mark, BWR Grade of size 1980MM x 900MM by fixing with 10 nos nut and bolt of size 75 X 6 mm with GI washer all as specified & directed by Engineer-in-charge.

Bed Hard wooden with Ply Wood Top (FD-246,247 )

M&L for removing of old unserviceable head rest and S&F New head rest of bed hard plywood top made of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified in drg and directed by Engineer-in-charge.

All as per item No 4.01 above but foot rest of Bed hard plywood Top, rest all as specified in drg and directed by Engineer-in-charge.

M&L for removing of old unserviceable long rail and S&F new long rail made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engineer-in-charge.

M&L for removing of old unserviceable support/ Stiffener and S&F new support/stiffener made out of 1st class teak wood without crack and knots rest all as specified in drg and directed by Engineer-in-charge.

M&L for removing of old unserviceable ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade of make-National/Kit Ply/Century rest all as specified in drg and directed by Engineer-in-charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of bed hard rest all as directed by Engineer-in-charge.

Chair Barber

M&L for replacement of old u/s side arm and S&F of new side arm and fixed to chair Barber all as specified in drawing and directed by Engineer-in-charge

Removing old Cushion seat from the existing Chair Barber and S&F new Cushion seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

Removing old Cushion Back from the existing Chair Barber and S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

M&L for replacement of old u/s base assy and S&F of new base assy to chair Barber all as specified in drawing and directed by Engineer-in-charge

M&L for replacement of old u/s hydraulic assy and S&F of new hydraulic assy to chair Barber all as specified in drawing and directed by Engineer-in-charge

Removing old neck rest (replace form and upholsterey) from the existing Chair Barber and S&F new neck rest (replace form and upholsterey) all as specified in drawing and diredted by Engineer-in-charge

Bar Stool Cushioned Adj

Removing old Cushion seat from the existing Bar Stool and S&F new Cushion seat with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

M&L for replacement of old u/s hydraulic assy and S&F of new hydraulic assy to Bar stool all as specified in drawing and directed by Engineer-in-charge

Chair Visitor with arms and cushion (Delite DK3003/1427/DK-406, DK-1406, DVC-9223, DC-7) Chair Tubular With Cushion

Removing old Cushion seat from the existing Chair visitor and S&F new Cushion seat with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

Removing old tepestery/ Rexine from the existing Chair visitor and S&F new tepestery/ Rexine with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

M&L for removing of old unserviceable wooden hand rest and S&F New wooden hand rest of chair visitor made of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak rest and polished by french polish all as specified in drg and directed by Engineer-in-charge.

M&L for removing of old unserviceable hand rest of cushion leather/ Rexine and S&F New hand rest of cushion leather/ Rexine of chair visitor made of Classic leather or equvalent all as specified in drg and directed by Engineer-in-charge.

Chair conference

Taking out unserviceable fron leg from existing chair conference with cushioned and S&F new front leg made out of 1st class hard wood (Teak Wood) to be fixed required size & shape all as specified and directed by Engineer-in-charge

Taking out unserviceable fron back from existing chair conference with cushioned and S&F new back leg made out of 1st class hard wood (Teak Wood) to be fixed required size & shape all as specified and directed by Engineer-in-charge

Taking out unserviceable stiffner from existing chair conference with Cushioned and S & F new stiffner made out of 1st class hard wood (Teak wood) to be required sizee all as specified and directed by Engineer-in-charge

Taking our unserviceable front, rear and side rails from existing chair conference with cushioned and S&F new front leg made out of 1st class hard wood (Teak wood) to be required size all as directed by Engineer-in-charge

Taking out unserviciable cushion with cover from seat from existing chair conference with cushioned and replacing the same with new approved quality cushion with cover of tapestry/ velvet cloth. Cushion shall be 32 density required size duly covered with velvet cloth (Rate of velvet cloth not less than @ Rs. 250/- per meter) make sleep well and shpe complete all as specified and directed by Engineer-in-charge

M&L preparation of wooden sruface of chair conference with cushioned and apply one coat of french polish for all wooden parts as specified and directed by Engineer-in-charge.

Revolving and tilting Executive medium back chair of size 515 x 515 x 800 mm high

Taking down and removing of old unserviceable materials i.e foam and cloth velvet etc from seat/back from chair revolving and tilting exicutive med back and supply and fixed 12mm th hot pressed ply wood upholstered withfabric and moulded polyurethane foam seat and back of chair revolving and tilting executive med back with change of new tapestry, rate of tepestry shall not be less than Rs. 250/RM with foam cushion shape/size/pattern as per old existing seat and back complte all as specified and directed by Engineer-in-charge.

Taking down and removing of old unserviceable wheels from chair revolving Exicutive med back and supply and fixing of new wheel as required tupe (i.e push or thread type) of chair revolving and tilting exicutive med back complete all as specified and directed by Engineer-in-charge.

Taking down and removing of old unserviceable hydraulic from chair revolving and tilting exicutive med back and supply and fixing of new hydraulic of chair revolving and tilting exicutive med back complete all as specified and directed by Engineer-in-charge.

Taking down and removing for old unserviceable PU arms from chair revolving and tilting exicutive med back and supply and fixing of new black integral skin polyurethane reinforced with MS insert it shall be scratch and weather resistant of chair revolving and tilting exicutive med back complete all as specified and directed by Engineer-in-charge.

S&F replacement of seat base including gas welding of chair revolving and tilting exicutive med back all as specified and directed by Engineer-in-charge.

M&L of one coat of enamel paint to be match with existing colour preparation smooth surface of the steel frame complete all of chair revolving and tilting exicutive med back as specified and directed by Engineer-in-charge.

Table conference 12 seater Godrej, Table conference 10 seater capacity oval shape (Make Delite), Conference table made out of 19mm thick commercial board For 10 Person, Conference table made out of 19mm thick commercial board For 08 Person

Taking out of unserviceable top from existing table conference 12 seater and S&F new top of table conference made out of 25 mm pre laminated paricle board, 4mm thick half round teak wood edging shall be provided all around the rop as required size shape and shade shall be approved by GE. New top of table shall be fixed on existing frame with screws complete all as specifide, directed by Engineer-in-charge.

Taking out of unserviceable side panel particle board from existing table conference 12 seater and S&F new side panel made out of 18 mm pre laminated paricle board shall be provided as required size shape and shade shall be approved by GE. New side panel shall be fixed on existing frame with scerws complete all as specified , directed by Engineer-in-charge.

M&L of nylonebuffers at bottom of the legs shall be replaced as specified and directed by Engineer-in-charge.

M&L preparation of wooden sruface of table conference 12 seater and apply one coat of melamine/ french polish for all wooden parts as specified and directed by Engineer-in-charge.

Taking out of unserviceable top from existing table conference 10 seater and S&F new top of table conference made out of 25 mm pre laminated paricle board, 4mm thick half round teak wood edging shall be provided all around the rop as required size shape and shade shall be approved by GE. New top of table shall be fixed on existing frame with screws complete all as specifide, directed by Engineer-in-charge.

Taking out of unserviceable side panel particle board from existing table conference 10 seater and S&F new side panel made out of 18 mm pre laminated paricle board shall be provided as required size shape and shade shall be approved by GE. New side panel shall be fixed on existing frame with scerws complete all as specified , directed by Engineer-in-charge.

M&L of nylonebuffers at bottom of the legs including taking down existing legs all as specified and directed by Engineer-in-charge.

M&L preparation of wooden sruface of table conference 10 seater and apply one coat of melamine/ french polish for all wooden parts as specified and directed by Engineer-in-charge.

Taking out of unserviceable top from existing table conference 8 seater and S&F new top of table conference made out of 25 mm pre laminated paricle board, 4mm thick half round teak wood edging shall be provided all around the rop as required size shape and shade shall be approved by GE. New top of table shall be fixed on existing frame with screws complete all as specifide, directed by Engineer-in-charge.

Taking out of unserviceable side panel particle board from existing table conference 8 seater and S&F new side panel made out of 18 mm pre laminated paricle board shall be provided as required size shape and shade shall be approved by GE. New side panel shall be fixed on existing frame with scerws complete all as specified , directed by Engineer-in-charge.

M&L of nylonebuffers at bottom of the legs including taking down existing legs all as specified and directed by Engineer-in-charge.

M&L preparation of wooden sruface of table conference 8 seater and apply one coat of melamine/ french polish for all wooden parts as specified and directed by Engineer-in-charge.

Work Station 1000(L) x 600() x 750(H) with one key board tray 100 mm deep, 400mm wide on sliding channel and cabinet

M&L for removing old unserviceable top and S&F new top for table writing made out of 19 mm thick prelaminated MDF board both side teak face exterior grade (ISI marked) with 5mmPVC beading (Teak face) around fixed with fevicol all as specified , directed by Engineer-in-charge

M&L for removing old unserviceable drawers and S&F new drawers complete all as specified directed by Engineer-in-charge

M&L for removing old unserviceable side purlin and S&F new side purlin all made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked) as specified directed by Engineer-in-charge

M&L for removing old unserviceable back and S&F new back made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked) complete all as specified directed by Engineer-in-charge

M&L for removing old unserviceable shelves and S&F new shelves complete made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked)all as specified directed by Engineer-in-charge

M&L for removing old unserviceable lock and S&F new lock (Make Harrison, Godreg and Link) all as specified directed by Engineer-in-charge

Removing old unserviceable aluminium panel corners and S&F new aluminium panel corners all as specified, directed by Engineer-in-charge

Removing old unserviceable aluminium top palnels and S&F new aluminium top panels all as specified, directed by Engineer-in-charge.

Removing old unserviceable front palnel of work station and S&F new front palnel of work station all as specified, directed by Engineer-in-charge.

Removing old unserviceable side palnel of work station and S&F new side palnel of work station all as specified, directed by Engineer-in-charge.

Chair Steel Padded with Arm

Removing old Cushion seat from the existing Chair steel padded and S&F new seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified diredted by Engineer-in-charge

Removing old Cushion Back from the existing Chair steel padded and S&F new back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified, diredted by Engineer-in-charge

M&L for apply one coat of synthetic enamal paint black to completely after preparation of old painted surface cleaning with sand paper and applying primer where ever required to chair steel padded all as specified, directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from chair steel padded S&F new hard rubber shoe 18 x 18mm all as as specified, as per sample

M&L for removing old unserviceable hard rubber cap from Chair steel padded S&F new hard rubber cap all as as specified as per sample.

Table Office Officer

M&L for removing old u/s tops from Table office officer steel(TP) and S&F new top made out of 18mm thick MDF board exterior grade (ISI marked) both side teak face with 5mm thick PVC beading(Teak Face) all around, all as specified, directed by Engineer-in-charge.

M&L for removing of unserviceable drawers from existing table office officer steel and S & F new drawers made out 1 mm thick MS sheet bend to shape all as specified, directed by Engineer-in-charge.

M&L for removing of unserviceable shutter of side unit from existing table office officer steel and S & F new shutter for side unit made out 1 mm thick MS sheet bend to shape all as specified, directed by Engineer-in-charge.

Removing of old unserviceable lock from existing table office officer steel and S&F new lock (Make Harrison, Godrej and LINK) all as specified, directed by Engineer-in-charge.

Removing of old unserviceable drawer handle from existing table office officer steel and S&F new drawer handle (as per sample) all as specified, directed by Engineer-in-charge.

Removing of old unserviceable side panel for table office officer and S&F new side panel for table office officer (as per sample) all as specified and directed by Engineer-in-charge

Removing of old unserviceable front panel for table office officer and S&F new front panel for table office officer (as per sample) all as specified and directed by Engineer-in-charge

Removing of old unserviceable top frame for table office officer and S&F new top frame for table office officer (as per sample) all as specified and directed by Engineer-in-charge

M&L for removing old u/s tops from Table office officer steel(TP) side unit and S&F new top made out of 18mm thick MDF board exterior grade (ISI marked) both side teak face with 5mm thick PVC beading(Teak Face) all around, all as specified, directed by Engineer-in-charge.

Removing of old unserviceable side panel for table office officer side unit and S&F new side panel for table office officer side unit (as per sample) all as specified and directed by Engineer-in-charge

Removing of old unserviceable top frame for table office officer side unit and S&F new top frame for table office officer side unit (as per sample) all as specified and directed by Engineer-in-charge

M&L for removing old unserviceable hard rubber shoe from Table office officer steel S&F new hard rubber shoe all as as specified, as per sample

M&L for removing old unserviceable hard rubber cap from Table office officer steel S&F new hard rubber cap all as as specified as per sample.

M&L for apply one coat of synthetic enamal paint sand and light creem to all steel Surface after preparation of old painted surfaces, cleaning with sand paper and applying primer where ever required to Table office officer steel all as specified & directed by Engineer-in-charge.

Desk for Two Seats (Jr-1)

Removing of old unserviceable side for Desk for Two Seats (Jr-1) and S&F new side for Desk for Two Seats (Jr-1) (as per sample) all as specified and directed by Engineer-in-charge

M&L for removing of unserviceable top box (for holding of study material) from existing Desk for Two seats (Jr-1) and S & F new top box (for holding of study material) made out 19 mm thick MDF board both side teak face with 4 mm teak wood bearing all around all as specified, directed by Engineer-in-charge.

M&L for apply one coat of synthetic enamal paint light creem to all steel Surface after preparation of old painted surfaces, cleaning with sand paper and applying primer where ever required to Desk for Two Seats (Jr-1) all as specified & directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from Desk for Two Seats (Jr-1) S&F new hard rubber shoe all as as specified, as per sample

Desk for Two Seats (Jr-2)

Removing of old unserviceable side for Desk for Two Seats (Jr-2) and S&F new side for Desk for Two Seats (Jr-2) (as per sample) all as specified and directed by Engineer-in-charge

M&L for removing of unserviceable top box (for holding of study material) from existing Desk for Two seats (Jr-2) and S & F new top box (for holding of study material) made out 19 mm thick MDF board both side teak face with 4 mm teak wood bearing all around all as specified, directed by Engineer-in-charge.

M&L for apply one coat of synthetic enamal paint black to all steel Surface after preparation of old painted surfaces, cleaning with sand paper and applying primer where ever required to Desk for Two Seats (Jr-2) all as specified & directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from Desk for Two Seats (Jr-2) S&F new hard rubber shoe all as as specified, as per sample

Chair (Jr-1)

M&L for removing of old u/s top rail and S&F new top rail made out 25 x 25mm MS Square pipe and welded to frame ofChair (Jr-1) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Chair (Jr-1) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Chair (Jr-1) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s seat and S&F new seat made out MDF board and fixing the same with GI Nuts & bolts toChair (Jr-1) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s Back and S&F new Back made out MDF board and fixing the same with GI Nuts & bolts to Chair (Jr-1) all as specified & directed by Engineer-in-charge

M&L for apply one coat of synthetic enamal paint sand & light creem to all steel surface after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required to Chair (Jr-1) all as specified & directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from Chair (Jr-1) S&F new hard rubber shoe all as as specified, as per sample

Chair (Jr-2)

M&L for removing of old u/s top rail and S&F new top rail made out 25 x 25mm MS Square pipe and welded to frame ofChair (Jr-2) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Chair (Jr-2) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Chair (Jr-2) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s seat and S&F new seat made out MDF board and fixing the same with GI Nuts & bolts to Chair (Jr-2) all as specified & directed by Engineer-in-charge

M&L for removing of old u/s Back and S&F new Back made out MDF board and fixing the same with GI Nuts & bolts to Chair (Jr-2) all as specified & directed by Engineer-in-charge

M&L for apply one coat of synthetic enamal paint sand & light creem to all steel surface after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required to Chair (Jr-2) all as specified & directed by Engineer-in-charge.

M&L for removing old unserviceable hard rubber shoe from Chair (Jr-2) S&F new hard rubber shoe all as as specified, as per sample

Almirah Large Steel (FD-67(M) , FD-1031)

M&L for removing of old broken/unserviceabble shelves from Almirah large steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engineer-in-charge.

M&L for replacement of broken/dacayed legs from existing Almirah Large steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M & L for removing of old unserviceable locking device three way from existing Almirah Large steel and S&F new locking device made out of 10 mm MS bar round and 3 mm MS plate all as per site requirement and directed by Engineer-in-charge

M & L for removing of broken/unserviceable handle with bush from existing almirah large steel and S&F new Chromium plated steel handle with bush all as specified in drg & directed by Engineer-in-charge.

M & L for removing of old unserviceable lock from existing almirah large steel and S&F new lock all as specified in drg & directed by Engr-charge

S&F cleats made out of 2 mm thick sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed by Engineer-in-charge.

M&L for apply one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Almirah Large steel all as specified & directed by Engineer-in-charge.

Almirah Small Steel (FD-1032)

All as per item Ser No 18.01 above but shelves for Almirah small steel.

All as per item Ser No 18.02 above but legs for Almirah small steel.

All as per item Ser No 18.03 above but locking devise for Almirah small steel.

All as per item Ser No 18.04 above but handle with bush for Almirah Small Steel.

All as per item Ser No 18.05 above but lock for Almirah small steel

All as per item Ser No 18.06 above but cleats for Almirah small steel.

All as per item Ser No 18.07 above but painting to Almirah small steel.

Locker Bed Side Steel (FD-1029)

M/L for removing of old unserviceable hasp and stapple from existing Locker bed side steel and S&F new CP hasp and stapple of size 75 x 40 x 3 mm as specified in drg and directed by Engineer-in-charge

M&L for removing of old unserviceable handle from existing Locker bed side steel and S&F new CP handle 100 mm long as specified in drg and directed by Engineer-in-charge

M & L for removing of old unserviceable hanging pipe from existing Locker bed side steel and S&F new 20 mm dia CP steel conduit pipe with 02 Nos socket as specified in drg and directed by Engineer-in-charge

M&L for removing of broken/dacayed legs from existing Locker Bed Side steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M&L for apply one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Locker bed side steel all as specified & directed by Engineer-in-charge.

Table Office Clerk Steel {FD-84(M) & FD-1004}

M&L for removing old u/s tops from Table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading fixedwith fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of unserviceable drawers from existing table office clk steel and S & F new drawers made out 1 mm thick MS sheet all as specified in drg & directed by Engineer-in-charge.

Removing of old unserviceable lock from existing table office clk steel and S&F new lock all as specified in drg & directed by Engineer-in-charge..

M&L for one coat of synthetic enamal paint OG to all steel Surface after preparation of old painted surfaces by filling with putty and applying sand paper and primer where ever required to Table office clk steel all as specified & directed by Engineer-in-charge.

Table Office Officer Steel {FD-84(M) & FD-1003}

All as per item Ser No 21.01 above but Top of Table office Offr steel.

All as per item Ser No 21.02 above but drawers of Table office Offr steel.

All as per item Ser No 21.03 above but Lock of Table office Offr steel

All as per item Ser No 21.04 above but painting to Table office Offr steel

Table Dining ORs {FD-165(M)}

M&L for removing of old u/s top of Table Dining OR and S&F new top made out of 19mm thick block board with 22 gauge aluminim sheet, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing the unserviceable front/rear top rail/bottom middle stiffener of table Dining ORs and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing the unserviceable top side rails/bottom side stiffener of table Dining ORs and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing the unserviceable legs of table Dining ORs and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to table dining OR after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel With Arms {FD-75 (M)}

M&L for removing of old/broken flat iron from existing Chair CB steel with arms and S&F new flat iron 25 x 3 mm of required length shall be welded with seat of chair CB Steel with arms complete all as specified and directed by Engineer-in-charge.

M&L for removing of U/S seat from existing Chair CB steel with arms and S&F new seat made out of 2nd class Shisham wood duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M&L for removing of U/S back rest from existing Chair CB steel with arms and S&F new back rest made out of 2nd class Shisham wood duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken arms rest from existing Chair CB steel with arms and S&F new arms rest made out of 1st class teak wood without crack and knots duly black stove polished fix with screw steel all as specified and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to Chair CB steel with arms after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel Without Arms {FD-75 (M)}

All as per item ser No 24.01 above but flat iron for Chair CB steel without arms

All as per item ser No 24.02 above but seat of Chair CB steel without arms

All as per item ser No 24.03 above but back of Chair CB steel without arms

All as per item ser No 24.04 above but painting of Chair CB steel without arms

Chair Varandah (FD-256)

M&L for removing of wornout U/S cane/Nylon newar of chair varandah and one coat of synthetic enamal paint white after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required, all as specified and directed by Engineer-in-charge.

M&L for recanning with new standared 3.5 mm wide white plastic cane of semi circular type in mat pattern and all as directed by Engineer-in-charge.

Charpoy GI Nylon Newar (FD-220) and Charpoy GI with ply top {FD-220(R)}

M&L for removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade incl threading both sides all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail retervied from ser item No 10.01 above incl threading both side & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy and making leg from old u/s short rail retervied from ser item No 10.02 above incl threading, S&F 6mm MS plate in bottom and 25 x 3mm of MNF clamp (2 Nos each leg) to be welded with legs & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old broken/damaged chuk nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge

M&L for removing old broken/damaged GI elbow 3 way 32 mm bore and S&F new GI elbow 3 way 32mm bore (ISI marked) to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge.

M&L for tightening of loose charpoys after removing of US plywood from existing GI charpoy and S&F of New 12mm thick plywood, ISI Mark, BWR Grade of size 1980MM x 900MM by fixing with 8 nos nut and bolt of size 40 X 6 mm with GI washer, Teak wood beading 4mm thick half round moulded shall be provided alround the plywood top. all as specified & directed by Engineer-in-charge.

Charpoy IP/MS with Hard top (FD/E6/MAP-II/01)

M&L for removing of damaged/broken long rail from charpoy MS hard top and S&F new long rail made out of MS pipe 65 x 25mm, 1.6mm thick (ISI marked) incl welding to existing charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy MS Hard top and S&F new short rail made out of MS pipe 65 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy MS Hard top and S&F legs made out of MS pipe 38 x 38, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken support/stiffener from charpoy MS Hard top and S&F new support/stiffener made out of MS pipe 25 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to charpoy MS Hard top after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required all as specified & directed by Engineer-in-charge.

M&L removing of US plywood from existing charpoy MS Hard top and S & F New 12mm thick ply, ISI Mark, BWR Grade of size 1980 MM x 900MM by fixing with 10 nos nut and bolt of size 50 X 3 mm complete all as specified & directed by Engineer-in-charge.

Form without back FD-1027

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required to Form without back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks sheesham without crack and knots of size 1900 x 255 x 25 mm and fixing the same with GI Nuts & bolts to Form Without back all as specified & shown in drg

Rack side 3/4 space steel (FD-1023)

M&L for one coat of synthetic enamal paint OG to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required to Rack side 3/4 spaces steel all as specified & directed by Engineer-in-charge.

Table 1520 x 860 x 760mm (FD-1010)

M&L for removing old u/s tops from Table steel 1520 x 860 x 760mm and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4 mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 1520 x 860 x 760mm and S&F new front/rear top rail/bottom middle stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 1520 x 860 x 760mm and S&F new top side rails/bottom side stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable legs of table steel 1520 x 860 x760 mm and S&F new legs made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

Bed Hard wooden with Ply Wood Top (FD-246 )

M&L for removing of u/s headrest and S&F New headrest of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified and shown in drg and directed by Engineer-in-charge.

All as per item No 32.01 above but footrest of Bed hard plywood Top, rest all as per drg and directed by Engineer-in-charge.

M&L for removing of u/s long rail and S&F of new long rail made out of Ist class Sheesham wood with crack and knots, rest all as specified in drg and directed by Engineer-in-charge.

M&L for removing of u/s support/Stiffener and S&F of new support/stiffener made out of 1st class Sheesham wood without crack and knots rest all as specified in drg and directed by Engineer-in-charge.

M&L for removing of old u/s ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade rest all as specified in drg and directed by Engineer-in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of bed hard rest all as directed by Engineer-in-charge.

Chair Dinning (FD-228, FD-279.)

M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg.

Rear leg as specified & shown in drg.

Stiffener as specified & shown in drg.

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining and as directed by Engineer-in-charge

Chair Easy (FD-171, FD-209, FD-229)

M&L for removing of old broken components of chair easy and S&F new component made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Seat rails as specified & shown in drg.

Back rails as specified & shown in drg.

Arms as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair easy and as directed by Engineer-in-charge.

Chair Writing (FD-280)

M&L for removing of old broken components of chair writing and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape ,planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Stiffener as specified & shown in drg

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Arms as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of chair writing and as directed by Engineer-in-charge.

Peg Table (FD-266, FD-277, FD-384)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 19 mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround and all as specified & shown in drg.

M&L for removing of old unserviceable legs and S & F new leg made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 36.02 above, but front & rear rail, rest all as per drg.

All as per item No 36.02 above, but bottom side stiffener, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of peg table and as directed by Engineer-in-charge.

Sofa set 5 Seater/4 Seater/3 Seater/2 Seater/1 Seater (FD-373)

M&L for removing of old broken components of Sofa Set and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified & shown in drg

Side rails of Seat/Back as specified & shown in drg

Stiffener of Seat/Back as specified & shown in drg

Front/Rear rails of seat sofa set 3 seater as specified & shown in drg

Front/Rear rails of seat Sofa 1 seater as specified & shown in drg

Top/Bottom rails of back Sofa set 3 seater as specified & shown in drg

Top/Bottom rails of back sofa set 1 seater as specified & shown in drg

M&L for replacement of old u/s foam cushion and S&F new foam cushion of size 530mm x 560mm" x 4" thick, 32 density of Cool foam or equivalent make of duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 5 Seater and as directed by Engineer-in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 2 Seater and as directed by Engineer-in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of sofa chair 1 Seater and as directed by Engineer-in-charge

Table 600 x 600 x 760 mm (FD-293)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 19 mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol around and as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 38.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 600 x 600 x 760 mm and as directed by Engineer-in-charge.

Table 900 x 900 x 760 mm (FD-291)

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 19 mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround and as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 39.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 900 x 760 mm and as directed by Engineer-in-charge.

Teapoy Wooden FD-382

M&L for removing old unserviceable top and S & F new top made out of prelaminated particle board 19 mm thick one side teak face other side white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing of old unserviceable legs and S&F new legs made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 40.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 40.02 above, but bottom side stiffener, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of teapoy wooden and as directed by Engineer-in-charge

Table writing FD-275 :

M&L for removing old u/s top and S&F new top for table writing made out of 19 mm thick prelaminated particle board one side teak face other side white exterior grade (ISI marked) with 4mm teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 41.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 41.02 above, but side rails/bottom side stiffener rest all as specified and shown in drg.

All as per item No 41.02 above, but bottom middle stiffener rest all as specified and shown in drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for removing old u/s side purlin and S&F new side purlin all made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked) as specified & shown in drg.

M&L for removing old u/s back and S&F new back made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked) complete all as specified & shown in drg.

M&L for removing old u/s shutters and S&F new shutters complete made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked)all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table and as directed

Table centre , Table Centre two Tier ( FD-274)

M&L for removing of old u/s top and S&F new top for table centre made out of prelaminated particle board 19 mm thick one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround, all as specified & shown in drg.

M&L for removing of old u/s top second Tier and S&F new top for second Tier for table centre tow tier made out of prelaminated particle board 19 mm one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing of old u/s front/rear top rails and S&F new front/rear rails made out of 1st class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg.

All as per item No 42.03 above, but side top rails/bottom side Stiffener, rest all as per drg.

All as per item No 42.03 above, but legs, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table centre and as directed by Engineer-in-charge.

Table Dining 6 Persons (1500x900mmx760mm) FD-273 :

M&L for removing of old u/s top and S&F new top of size 1500 x 900 x 19 mm thick for table dining 6 persons made out of prelaminated particle board one side teak and other side white exterior grade (ISI marked) with 4 mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of Ist class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg

All as per item No 43.02 above, but side rails/Support, rest all as per drg.

All as per item No 43.02 above, but front/rear long rails, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table dining 6 person and as directed

Table 900 x 600 x 760 mm with and without drawer (FD- 283 , FD- 284)

M&L for removing old u/s top and S&F new top for table 900 x 600mm made out of 19 mm thick prelaminated particle board one side teak face other side white laminated exterior grade (ISI marked) with 4mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg.

All as per item No 44.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 44.02 above, but front/rear long rails/ bottom middle Stiffener , rest all as per drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 600 and as directed by Engineer-in-charge

Table Dressing Gents with Mirror (FD-230)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 760 x 380 x 5.5mm duly framed made out of Ist class teak wood without crack and knots of size 25 x 20 mm & 6mm thick commercial ply on back and supported with batten 35 x 25mm all as specified & shown in drawing

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated particle board with drawer complete all as per drawing (back shall be 06 mm ply)

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engineer-in-charge

Table bed side (FD -248, FD-276)

M&L for removing of old broken side purlin of table bed side S&F new side purlin made out 19 mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) duly fixed 4mm thick teak wood beading fixed with fevicol where ever reqd, as specified & shown in drg.

M&L for removing of old broken top/bottom/shelve of table bed side S&F new top/bottom/shelve made out 19 mm thick prelaminated particle board both side teak face exterior grade (ISI Marked) duly fixed 4mm thick teak wood beading fixed with fevicol where ever reqd, all as specified & shown in drg.

M&L for removing of old broken back of table bed side S&F new back for table bed side made out 6mm thick commercial ply wood, as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to beading of table bed side and as directed by Engineer-in-charge

Table Draughtsman FD-6(M) , FD-303

M&L for removing old u/s top and S&F new top for table Draughtsman made out of 19 mm thick prelaminated particle board one side teak face other side white laminated exterior grade (ISI marked) with 4mm thick teak wood beading fixed with fevicol alround all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened and fixed with teak wood pinning and fevicolall as specified & shown in drg.

All as per item No 47.02 above, but side top rails all as specified & shown in drg.

All as per item No 47.02 above, but front/rear top rails all as specified & shown in drg.

All as per item No 47.02 above, but bottom side Stiffeners all as specified & shown in drg.

All as per item No 47.02 above, but foot rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of french polish to old and new surface of table draughtsman and as directed by Engineer-in-charge.

Chair dining cushioned (FD/E6/MAP/10)

M&L for removing of old broken components of chair dining cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Vertical Strips as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining cushioned and as directed by Engineer-in-charge.

Mirror With Shelf (FD-404)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 355 x 455 x 5.5mm & frame made out of Ist class teak wood without crack and knots of size 25 x 19 mm & 6 mm thick commercial ply on back including polishing the frame complete all as directed by Engineer-in-charge.

M&L for removing old u/s Shelf and S&F new Shelf of size 600 x 380 made out of particle board with 4mm thick teak beading and MS Bracket of Angle Iron of size 150x125 mm complete all as directed by Engineer-in-charge.

M&L for removing old decayed cane plastic of any size and re-canning with new cane (Superior quality) white colour of chair easy, chair Dining, Chair writing and stool dressing CB, etc with 2mm wide half rounded cane and 3.5mm cane in perimeter as per Godrej pattern and all as directed by Engineer-in-charge.

S&F 1st class teak wood Corner of size 100 x 100 x 25mm thick to be fixed with 60mm steel screw between the legs and top rails of Table dining 8 Pers/6 Pres/4 Pers, Table 900 x 900 x 760mm, Table draughtsman, Tale 600 x 600 x 760, table 900 x 600 with and without drawer etc and as directed by Engineer-in-charge

S&F 1st class teak wood Corner of size 75 x 75 x 25mm thick to be fixed with 60mm steel screw between the legs and rails of chair Dining, Chair writing, Chair easy, Peg table, Teapoy, Table Centre etc and as directed by Engineer-in-charge

Supply and fix knob for drawers and shutters of Table writing, Table 900 x 600 with drawer, Table dressing Gents etc. All as specified and shown in drg or as directed by Engineer-in-charge.

Supply and fix FI Clips for Dressing Mirror Gents and Mirror with shelve etc. All as specified and shown in drg or as directed by Engineer-in-charge.

M&L for spot Welding of steel items of broken joints etc including scraping preparing surface of welded pertion by grinding and buffing to make fit for painting and applying two coatt of synthetic enamal paint of same shade.

M&L for removing old unserviceable hard rubber shoe from chair verandah and S&F new hard rubber shoe 20mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Table Office Officer steel , Table office clerks steel, Table dining ORs, Form with/without back and S&F new hard rubber shoe 25 x 25mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Charpoy MS Hard Top and S&F new hard rubber shoe 32 x 32mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe and Cap from Chair CB Steel with/Without Arm and new hard rubber shoe all as as specified and shown in drawing

Supply and fix hard rubber rings at the bottom of Legs of chair dining, chair dining JCOs/OR, Chair writing, chair dining cushioned, chair easy, chair easy cushioned, chair dtmn etc

Supply and fix hard rubber rings at the bottom of Legs of Table Dining, Table 900 x 900 x 760mm, Table 900 x 600 x 760mm, Table Centre, Sofa Sets and Peg table etc

B.S Constructions

M/s godara infratech and power industries

M/S Shri Balaji Enterprises

SK INDUSTRIES

PRAFUL ENTERPRISES