Certain Repair to Drain Plinth Protection path other Misc Work in CABS STIR and CEMILAC Bangalore

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Demolition of reinf cement concrete in any description and in any position not otherwise specifically provided , (reinforcement cut as required to fecilitate demolition ) below or above ground level.

M&L for providing precast cover slab in 1:2:4, type B-1(using 20 mm Graded stone aggregate) complete including necessary form work

Excavation in trenches not exceeding 1.5 m deep for foundation, etc in soft soil specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

M&L for pcc 1:3:6 type C2, 75 mm thick using 40 mm graded stone aggregate as in plinth protection finished even and smooth.

M&L Cylindrical lock brass size Backset 60mm Knobs made of brass Pin cylinder mechnism in brass Automatic deadlocking complete all as specified and completed

M&L for pre-cast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) as in kerb stone of over all size 450 x 350 x 150mm thick including chamfers, weatherings, throating etc and setting in cement mortor 1:4 complete with joints to match.

Preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for desilting and cleaning drain from mud, hard material like stone/brick etc complete all as directed.

Demolition of brick work, for drain,brick work ,concrete or stone boulder masonry built in cement mortar complete .

M&L for pre-cast cement concrete, Type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6, complete.

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 all as specified

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except Stone all as specified but except stone

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.20mm

M&L for providing PCC 1:2:4 type B2 (20mm graded stone aggregate) in surface channels & drains

M&L for providing rendering 15mm on fair faces of stone masonry finished even & smooth without using extra cement in CM 1:6

M&L for providing PCC 1:2:4 Ty B1 in coping (using 12.5mm graded stone aggregate) including necessary form work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped ends etc.

M&L Welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.6mm but n.exc 9mm complete.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia.

S & F TMT steel bars 6-8 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia.

Preparation of new or previously untreated surfaces & priming with red oxide and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 SQUARE METRE but n exc 4.00 Sqm each .

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm

S&F Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium powder coated window and ventilators shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion.

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion.

S & F sheet glass thick ordinary quality in exc 0.5 Sqm in each pan 4 mm thick with rubber beading as in window.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid of any type and cover fillets complete all as specified and directed

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for pcc 1:2:4 type B1, average thickness 40-70 mm thick using 20 mm graded stone aggregate as in flooring/ paving finished rough to receive cement tiles.

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L for pcc 1:2:4 type B0, 25 mm thick using 12.5 mm graded stone aggregate as in roof padding finished even and smooth.

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by forced application incl bituminous primer confirming ot IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under :- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying one coat of aluminium paint @ 100ml/Sqm.(MAKE:M/S IWL LTD/M/S STP LTD/M/S TEXSA INDIA LTD)

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15 mm thick stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement.

M&L Rendering 10 mm thick Cm 1:6 on fair faces of Brick masonry or concrete surface wall even and smooth without using extra cement.(New Brick Work)

M&L prepration of new surface on wall and applying two coats of distemper oil emulsion.

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer incl prepration of new wall surface including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).(ht Upto 20 Mtr including all necessary scaffolding)

Dismanling Sructural steel work including door ,gates but excluding framed work.

S & F Mild steel work as in doors or gate of angle Rungs in static tank of other section gusset plate rails ladder & Hand rail and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F polycorbonate sheet of perforated quality 5-6mm thick superior quality complete all as specified and as directed

Dismantling of water tanks and removing to store Exc 500 but n.exc 1000 ltrs.

S & F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Disconnecting existing PVC tank of capacity 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required and reconnecting and re-fixing in position after cleaning, repair etc complete all as specified and as directed. Cleaning and removing all scale and dirt etc from PVC tank and writting date cleaned on, from mouth of circulating pipes complete all as directed

All as per ser item No above but PVC tank of capacity 1000 ltr.

All as per ser item No above but PVC tank of capacity 2000 ltr.

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick.

S & F sheet glass 3mm thick for window ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion.

S & F 12mm thick wave free toughened clear glass with stainless steel spider fitting,fish mouth channel in bottom and top as per design with and including provision of all other neccessary fixture and accesaries,complete all as specified and directed.

S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.(Make:VISTA,MAC&MARC)

Supply and fix Health faucit assembly, brass, chromium plated consist of valve, sprayer, SS flexible pipe with for EWC suitable for 15 mm bore pipe fixed In repairs complete.

S & F for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor. Make : CERA, in repair.

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device. Make : CERA, in repair

Supply and fixing vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) Make : CERA ,in repair.

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer incl removal of existing treatment on wall surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

M&L applying ONE coats of Exterior emulsion weather proof paint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

Ashraya Nirman

Atom Engineers and Builders

SREE BUILDERS

SAI CONSTRUCTIONS

M/s H S VISWANATH CONSTRUCTIONS

RAHUL ENTERPRISES

ARATHEERTHA CONCEPTS

ABHISHEK CONSTRUCTIONS

AishwaryaConstructions