Installation, Supply and Commissioning of complete electric wiring of New Erector Hostel building STPS MPPGCL Sarni.

Amount

Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :-

Light point/fan points

Primary short point

Primary medium point

Primary long point

3 Pin 6 Amp socket outlet on separate board

Long point

Call bell/buzzer points

Long point

Twin control light points

Long point

Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board.

Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside onduit, screwless connector for joints as per specification for :-Long point

Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification: 4x2.5 Sq.mm.

Supplying and fixing of approved make modular type G.I. metal box 1.2mm minimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plate including fixing in concealed etc. as required for:-

1 or 2 Module metal box

3 Module metal box

4 Module metal box

6 Module metal box

8/9 Module metal box

12 Module metal box

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-

Single pole:MCB SP 0.5Amp to 5Amp 10kA rating

Single pole:MCB SP 6Amp to 32Amp 10kA rating

Double pole:MCB DP 6Amp to 32Amp 10kA rating

Four pole:MCB FP 100Amp 15kA ratingg

Supplying & fixing of approved make Industrial type metal plug & socket DBs (without MCB) SPN sheet encloser (dust protected) inclusive of 2 pole and earth metal plug and socket and space to incorporate SP MCB complete as per specification as required.

Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)-

2 Way single door

Supplying and installing of RCBOs (Residual current circuit breaker with overload and short circuit protection) ISI marked complete as per I.S. standard conforming to IEC:61009-1 & IS:12640-2, 240/415V 50 Hz with 10 kA short circuit withstand capacity for earth leakage, overload & short circuit protection including connection in existing enclosure in approved manner as per specification.

2 pole 32Amp, 30mA sensitivity

Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator):

Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only)

MCB/ Isolator SP/DP

MCB/MCCB Isolator TP/TPN/FP

Labour charges for fixing sheet steel enclosures, MCB DB surface mounting type, as per accepted practice on 25x25x 5 mm angle iron clamp, including supplying and fixing of clamp duly embedded in wall, cable connection etc. complete :-

Labour charges for fixing sheet steel enclosures, MCB/MCCBDB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc. complete :-

Supply and fixing as per specification call bell/buzzer of approved make with necessary materials complete.

Multi sound bell

Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board

100 Watt(2 module)

Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required

PVC. conduit 25 mm (HMS)

Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments

Ceiling Fan ( ISI marked )-1400 mm Sweep, minimum air delivery 245 m³/min and service value ≥ 4.10 as per BEE.

Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required.

300mm sweep RPM 900 / 1400

Supply and fixing Led tube rod comprising of LED tube with nonintegral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. specification for :-

Tube light LED 1 X 8/10Watt Integral i/c batten aluminium body, PC diffuser.

Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser.

Providing and fixing circular/hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Supplying and drawing co-axial T.V. cable RG6 Grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tined copper braid and protected with PVC sheathed in existing surface/concealed, steel/PVC conduit as required.

Supplying and drawing following pair, 0.5 mm PVC insulated copper conductor unarmoured telephone cable in existing surface/concealed, steel/PVC conduit as required

Telephone wire 0.5 mm, 2 Pair

Telephone wire 0.5 mm, 10 Pair

Supply, fixing and testing of RJ 11 telephone jack modular (1 Module)

Supply, fixing and testing of T.V. outlet modular (1Module)

Supply 1250 VA pure sine wave invertor - ECOVOLT NEO-1250 Make:- Luminous/equivalent

Supply of 200AH Inverter battery ILTT-25066 Make:- Luminous/equivalent

Supply of Trolley for Inverter & Battery Make:- Luminous/equivalent

Supply of 80cm (32") Smart LED TV

Supply of 32 in, LED TV 1366 x 768 pixels (& above) Wifi Smart TV 2 Speakers, 20 W Output 2 HDMI Ports, 1 USB Ports Screen Mirroring

Installation of battery and inverter with connection and complete testing

Wiring for sub-mains with PVC insulated cable FRLS with copper multi strand conductor ISI marked in recessed/concealed rigid PVC conduit (HMS) FRLS ISI marked of suitable size (conduit included) including 2mm thick accessories, connection etc, as required as per specification. 4 Wire sub main

4.0 sq. mm. cable

10.0 sq. mm. cable

Supplying of approved make, powder coated metal double door vertical TPN MCB DB IP 43 protection with provision for MCCB upto160A TP/FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB/MCBs) inclusive of busbar & connections etc

6 Way without MCCB

Laying of one number armoured / unarmoured cable 1.1.KV grade of size exceeding 120 sq. mm. but not exceeding 400 sq. mm direct in ground including excavation in all soil/ murrum /soft rock, and sand cushioning protective covering and refilling the pit etc. as required

Supply of ISI Marked Switch Disconnector Fuse (SDF), in sheet steel enclosure (Panel mounting cubicle type) confirming to IS:13947 (part I & III ) 3 pole and neutral , AC -23A ,50 Hz , 415 Volt with 3 HBC fuses complete.

Fixing of metal clad, 25x25x5 mm angle Fixing of metal clad enclosure on 25X25X5 mm angle iron clamp including supplying and fixing of clamp as required duly embedded in masonry including cable connection and other required material as per specification :

Fixingof 63Amp TP or TPN mainswitches /DB 63 Amp 240/415 Volt 4 to 8way or 63 Amp changeover switch/63 Amp 415 Volt Isolator /30 Amp 415 Volt TPN DB upto 6 way perpoleand busbar 4 way

Fixingof100AmpTPorTPNmainswitchor100Amp changeover switch/100 Amp 415Volt Isolators and bus bar 4 way

Fixingof200AmpTPorTPNmainswitchor200Ampchange over switch/200 Amp 415 Volt Isolators and busbar 4 way

Change over switches (off load)- Supplying of ISI Marked Change over switches in sheet enclosure confirming to IS : 4064 / IS : 13947 (part I & III ) with side handle operated 4 pole with two earthing terminals

200A (off load)- 200 Amps. 415/500 Volts. (off load )

Fixing of metal clad enclosure on 35 X 35 X5 mm angle iron clamp including supplying and fixing of clamp as required duly embedded inmasonry including cable connection and other required material as per specification :

Fixing of 300/400A TP or TPN main switch or change over switch- Fixingof 300/400AmpTPorTPNmain switchor 300/ 400Amp changeover switch/300/400Amp415Volt Isolatorsandbusbar 4 way

Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF > 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job

60Watt, color temp 3000-6500k as required.

Fixing of street light fitting- Fixing of street light bracket of required angular shape and size pipe bracket onwall /pole including M.S. clampnot less than 40 X 5 mm flat, nut, bolt 12 mm of required length with necessary material including connection 3 core flexible wire etc. complete as required excluding cost of pipe paid separately.

Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required

Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation in hard rock and refilling the pit with black soil.

Supply and laying 25mm X 6mm G.I. strip at 0.5 metre below ground level/surface as strip earth electrode including jointing etc. as required

Supply and drawing PVC insulated copper cable (earth continuity conductor) of green colour FRLS with copper multi strand conductor ISI mark in existing conduit along with other wires as required as per specification :

4MP IP fixed IR bullet camera

Supply, installation testing and commissioning of the IP bullet camera shall be equipped with a 1/3" 4MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps)/2688 × 1520 (20fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) IK10 impact resistant camera housing, As a true day/night solution, the camera shall use Smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.08 lux color @ F2.0 (Color, 1/3s, 30 IRE),0 lux B/W with IR LEDs on @ F2.0) video compression :- H.265 +, noise reduction: 3DNR,backlight compensation :- True WDR 120DB, angle of view :-104°/87° (H), 57°/48° (V),UL listed

16 channel NVR with 2 SATA

Supply, installation testing and commissioning of 16 channel NVR with 1080p real-time live view H.265/H.264MJPEG dual codec decoding up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 2 SATA HDDs up to 16TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification

Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below :-

Drain piping :- Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification.

40 mm dia ID

DASS ENGINEERING WORKS (BID ID -1205698)

BALAJEE ENTERPRISES (BID ID -1201006)

NEERAJ KUMAR JAIN (BID ID -1200508)

OMPRAKASH PRASAD CONTRACTOR (BID ID -1215939)

INDUSTRIAL PRODUCTS (BID ID -1219739)