SPL REPAIR TO INTERNAL WIRING OF OFFRS L/IN ACCN INCL CERTAIN OMQs ALONGWITH RENEWAL/ REPLACEMENT OF LIGHT FITTINGS, BER CEILING FANS AT CERTAIN LOCATIONS AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed.

M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for phase connection and black colour cable to be used for neutral connection) including PVC concealed conduit medium grade with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed for the following:- Note: Cutting and chasing deemed to be included in coated rate.

Light/ Fan/ Exhaust fan/ Bell point

5 Amp socket on same boared

5 Amp switch socket on Independent Board.

All as per item No 2 here in before but 4.0Sqmm PVC insulated un sheathed cable with stranded copper conductor for 5 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed.

S&F for socket only 3 pin, 5 Amps flush type 230/240 V complete all as specified and as directed. (For same Board only)

S&F for switch socket combination 2 in 1, 5/6 Amps flush type230/240 V complete all as specified and directed. (For Independent Board only)

S&F for switch socket combination 3 pin, 15/16 Amps flush type 230/240 V complete all as specified and directed.

S&F for ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and directed.

S&F for switch piano flush type 5/6 amps , 240 volt single pole one way complete all as specified and directed.

S&F for Step type electronic fan regulator flush type 230 volt 5 speed control and connecting up and fix position complete all as specified and directed.

S&F for bell push piano flush type, 5/6 amps, 240 volt, single pole complete all as specified and as directed.

S&F for buzzer/ ding dong bell, AC 230 volt, single pole complete all as specified and directed.

S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed. Make : Crompton, Cat Part No CCS-103-20-65-SL-DP-NWH or equivalent.

S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and directed. Make : Crompton, Cat Part No CCS-102-10-65-SL-DP-NWH or equivalent.

Taking down Exhaust fan from its position and doing complete overhauling of fan including replacement of clamp and rubber bush, copper winding, fan capacitor of 2.5mfd painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as specified and directed. .

Taking down ceiling fan from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, 02 No canopy, fan capacitor of 2.5mfd painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as specified and directed. .

S&F for building security light LED type of minimum 3500 Lumens (35/36 watts) pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and directed. Make : Crompton, Cat Part No LSTS-36-CDL-M or equivalent.

S&F in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 6 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

S&F in repair of factory made sheet metal enclosure for DBs double door, TPN, 415 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

S&F in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing complete all as specified and directed.

S&F in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity complete with connection testing complete all as specified and directed.

S&F in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amp current carrying capacity complete with connection testing complete all as specified and directed.

S&F in repair of sheet metal enclosure, single pole and neutral with two pin and earth plug and socket, 20 Amps, 230 Volts, 50 Hz complete with one single pole MCB of 20 Amps, 10kA, 230 volts, 50Hz, C curve type complete all as specified and directed.

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including medium grade concealed PVC conduit complete all as specified and as directed.

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including medium grade concealed PVC conduit complete all as specified and directed.

S&F for ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete including taking down old fan and depositing it to MES store yard for furthe disposal complete all as specified and directed.

Taking down geyser of any capacity, make, model, type from its position after disconnecting connection of geyser to take out to workshop for repairs and refixing back to its original position after repairs of inner tank, apparatus plate and thermostat and painting with two coats of DUCO paint (ISI grade) white using spray machine for spray painting including cleaning, washing, preparation of old painted surface and wiriting MES No complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 4mm galvanised iron/GI wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire of 4mm dia earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate of SSR Part-I complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep for taking out / laying of under ground cable,pole or stay and getting out in any type of soil including making good to the disbturbed surfaces such as hardstanding, footpath / pavments etc complete all as specified and directed.

Supply and laying for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).

Supply and laying in trenches brick, common burnt in clay, building brick, sub class 'B' designation 75 for cable protection complete all as specified and directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sqmm 4 core complete all as specified and directed.

M&L for boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe of size upto 50mm etc complete all as specified and directed.

S&F in replacement PVC insulated and PVC round sheathed, copper conductor industrial cable 1.5 sqmm, three core of copper conductor for connection of street light/Flood light / post top lanterns/garden lights etc. fittings on pole / wall / pillar from over head conductor / junction box / DB including termination clip etc complete in all respect through existing GI tubing of size 15mm/20mm dia or complete all as specified and directed.

S&F in replacement of LED bollard of 10 Watt, 230 volts, 50 Hz, IP65, new generation, energy saving, environmental friendly, long life, aesthetically designed with symmetrical light distribution, landscape luminaire with high power LEDs as light source and accessories such as pre-wired etc including PCC (1:4:8) Block of size 30cmX30cm X30cm and necessary earth work fixing arrangement complete all as specified and directed. Make: Crompton Cat Part No. LBLTW-10-CDL or equivalent in Philips/ GE.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm complete all as specified and directed.

M&L for construction of PCC foundation platform with PCC 1:3:6 type C2 (40mm graded aggregate) in foundation of street light pole including necessary earth work, frame work complete all as specified and directed.

S&F in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 130 x 130 x 77 mm suitable for 16/25 sqmm cable fixed to pole/ wall with suitable FI clamp 20X3 mm nuts , bolts and washers including provision of 01 No MCB, single pole, 240 volts, 10 KA 10 Amps, and suitable aluminium bus bar/ connector complete all as specified and directed.

S&F for esthetically designed decorative street light/post top light pole made up of Aluminium or mild steel step pole of minimum height 2.5Mtr with black finish Compatible for 02 no up and down post top LED light lamp fittings with B22 buld holder 02 Nos with for terminal connections & mounting accessories complete window cover is fitted with allen screws to the pole and the LED post top with all accessoried including LED warm white 20watt B22 bulb of 02 No complete including suitable mounting arrangement with base plate and nut bolt arrangements all as specified and directed. Make : FOS lighting cat part No 686UpDown-MS-PO2 or equivalent in Havells/Crompton/Wipro/Philips/GE

M/S. UDDUG CONSTRUCTION (BID ID -3269279)

M/s Pramillabh Construction (BID ID -3269070)

M/S CHAKRA GOHAIN (BID ID -3269521)

S K ENTERPRISE (BID ID -3269113)

KP GHOSH AND CO (BID ID -3266919)

M/S D G ENTERPRISE (BID ID -3267701)

M/S P.K.B.CONSTRUCTION (BID ID -3268298)