SPECIAL REPAIR TO P-41 (MES STAFF QTRS) AT BOLTON ROAD AND PROVN OF SHED FOR WCDMA, ADDN/ALTN TO EXISTING SHED IN OFFICERS MESS AND PROVN OF AREA DRAINAGE AT CAW UNDER GE (AF) HAKIMPET

Amount

Dismantling floor/wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and removed the rubbish outside MD land.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Demolition of plain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removed debris outside MD land.

M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified

Excavation in posts holes each n.exc 0.50 cum getting out, returning and filling in and ramming earth or broken rubbles mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance, n.exc 50 mtr and making good surfaces in hard/dense soil etc, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil

M&L Removing excavated material exc. 50m and nexc 250m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate) 25mm thick complete all as specified and directed.

M & L for 15 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free

M&L Non - skid Ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

-Ditto- all as per item above here-in-before but as in vertical surface such as skirting etc. to match with the flooring-ditto-

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado all as specified.

M&L for coloured Glazed ceramic tiles in vertical surface 350x250mmx7mm or 450X350X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for Plain Cement concrete type C-1 1:3:6 using 20mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, sub base, floor finish complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc., and removed rubbish outside MD land.

M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement including applying two coats of OBD over a coat of putty 3 mm thick all as specified and as directed..

M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement including.

M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement.

M&L washing,rubbing down and stopping of distempered and painted surfaces on wall and applying alkali resistant priming paint including one coat of 2mm thick putty finish to obtain smooth fnished wall surfaces and applying two coats of distempering to walls with distemper oil emulsion including preparation of old/new plastered surfaces all as specified and directed.

M&L washing,rubbing down and stopping of distempered and painted surfaces on ceiling and applying alkali resistant priming paint and applying two coats of OBD including preparation of new/old plastered surfaces all as specified and directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4)

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, Mirror polishing and edge rounded all as per specified for cooking platforms

M&L Machine cut kota stone slab flooring 20-25mm thick and including 15 mm thick cement screed 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with bee wax polish complete

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm CM plaster in 1:3 cement plaster and jointed with ditto as per item above

M&L Chequered cement concrete tiles with grey cement and no pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified.

Demolition of brick work built in CM including All Quions, arches, pillars etc

M&L brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 with modular bricks all as specified and as directed

M&L Brick work with flyash bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4

Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore

S&F high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 15 mm bore

S&F high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 20 mm bore

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm

S&FGun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore

Dismantling water tank of capacity exc 500& n.exc 1000 ltrs

S&F 500 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed

S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms)

Demolition and breaking up of AC drain pipes 100 mm dia set in CM

Demolition and breaking up of AC drain pipes 75 mm dia set in CM

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type 'P'

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed

S&F 110 mm bore PVC (SWR) junction single, (single T)with access door all as specified and as directed

S&F 75 mm bore PVC (SWR) junction single, (single T)with access door all as specified and as directed

S&F 75 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed

M&L for cutting holes in stone masnory built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required superficial area exc 150 sq cm but n.exc 400 sq cm

S&F in repairs vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of low or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs vitreous china wash basins, white, flat back, size 550X400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, pillar tap, casr copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed

S&F stainless Steel sink with drainage board made of 304 grade stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long Make:- Blue star/Prayag/Nirali

S & F stainless steel plate rack of size 900 x 1200mm rectangular, 1mm thick including provision of wooden gutties. Make :- Deep/Anjali

S&F15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S/F in repairs Angle stop valve 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F Chromium plated two way bib cock with flanges. Mk Parryware Cat NoT3534A1

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S & F health faucet with fluxi pipe and hand shover ,the length of hose 1mt fitted to the tap.make Parryware Cardiff T9941A1

S&F in repairs glass shelf corner assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing

S & F Brass chromium plated shower rose 125mm size all as specified and directed fixed in repairs

S&F in repairs PVC wall cabinet 320mm X 350mmX 270 mm with single door fixed to wall Cat no: SSMPL-04 of SEAGULL or equivalent as approved by GE.

S&F in repairs glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M&L for applying Acrylic Smooth exterior paint of required shade two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including complete removal of existing treatment on wall surfaces complete all as specified and as directed

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace including water proofing compound finished even surface including roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. complete all as specified and directed. Note: Paid and Measured water proofing compound seperately.

M&L for rendering 15 mm thick in CM 1:4 on concrete roof slabs including mixing water proofing compound as per manufacturer instructions by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brickwork or concrete surfaces to be finished even and smooth without using extra cement in CM 1:4 on walls complete all as specified and as directed

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed.

M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 3 mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane.

Supply only integral water proofing compound.

M & Labour for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed

M & Labour for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and Approved

Hacking out old broken glass (any thickness, size,quality or description ) from wooden/steel frames, glazed with beads

S&F 3mm thick sheet glass ordinary quality fixing with poutty in squre n.exc 0.5 sqm in each pane

S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in squre n.exc 0.5 sqm in each pane

S&F 1st class hard wood beads, straight (any size) for fixing, glazing or guaged joinery, renewed, including mitres etc. and removing old beads.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples

Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4 Sqm each

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each

S & F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

S & F for Pressed steel frames (size 105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions all as specified.

Providing Cement concrete in surface channels and drains type B2 1:2:4 using 20mm graded stone aggregate all as specified and as directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings and similar works including weathering slightly rounded or chamfered angles and throating as directed.

S&F 35mm thick, 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples

Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each

S & F in repairs Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 30 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides

M&L Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint overa coat pink primer

M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specifed and as directed.

S&F Steel windows with side hung shutters including projecting type hinges,steel handle,steel peg stays etc without glazing bars dovetailed or welded. complete all as specifed and as directed.

S&F Steel ventilators with top hung shutters including hinges, steel peg stay etc. complete all as specifed and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Steel work as in repairs, tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240.

M&L for Mild steel work as in caps, bases, angle brackets, cleats or other connecting plates with necesary fittings.

S & F for 11 to 15 mm dia of neck Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, to, but length of bolt exc 5cm but n exc 10cm long

M&L for cutting holes in stone walls built in cement mortor for inserting hold fasts and amking good in CM 1:4 or cement concrete 1:2:4 type b1 as required exc one brick but n.exc two bricks complete all as specified and as directed

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete

S&F 100 mm long MS butt hinges, medium weight cold rolled.

S&F 75 mm long MS butt hinges, medium weight cold rolled.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section

S&F 150 mm long extruided aluminium alloy handles fabricated type anodised,

S&F 100 mm long extruided aluminium alloy handles fabricated type anodised,

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hartd drawn steel spring, fixed in floor

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Brass Hat and coat hooks, solid body, 175mm to 250 mm all as specified and as directed

Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc.

S&F in repairs 1st class hard wood plain fillets rectangular exc. 3 and n.exc 6 sqcm wrought fixed with screws all as specified and as directed

M&L Prelaminated particle board 18mm thick, interior grade,prelaminated both side with decorative choice lamination fixed with screws to timber frame work for cupboard shutters 18 mm as specified and required including beadinds and hinges, trollers, handles, catchers and locking arrangement (Greenply or equivalent ) all as directed

S&F Brass Wardrobe hooks(single) 50mm to 60mm all as directed

S & F Continuous (piano) hinges 30 mm width of flaps,mild steel, bright finish or electro galvanised all as directed

Removing building materials etc.to a distance of 6 Km or under, beyond the lead included in the rates, including loading, unloading at the destination

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges fixed with self tapping screws as specified.

S&F Plain, galvanised, mild steel sheeting 1mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 welded joints are provided all as specified and directed by engineer-in-charge

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-

(a) One light point controlled by one one way switch .

(b) One ceiling fan point controlled by one one way switch.

(c) One Exhaust fan point controlled by one one way switch.

(d) One 3 pin socket outlet 5 Amps on the same board with other switches.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

(f) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

M&L for Modular switch 6A, 1 way. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Modular switch 16A, 1 way. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Socket outlet 6A modular. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Socket outlet 16A modular. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for switch bell push modular. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

M&L for Stepped type fan regulator(4steps), 120 W-2 modular. Complete all as specified and as directed. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F Electric bell/ buzzer 230 volts, single pole, 240 V. Make :Anchor/ Havells/ Legrand/ Crabtree

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree.

Supply and Fix Ceiling fan BLDC Motor without remote, colour - white , 5 star rating, energy saving of size 1200 mm Sweep, motor speed- 310 RPM, power consumption 62 Watt, Air flow 240 cfm, No of speed settings 05, with complete accessories and connecting up including suitable length of down rod including taking down the old ceiling fan all as specified and directed by Engineer-in-charge. Make : Orient, Model Name- Aero Quite/ Havells.

Supply and fix Exhaust fans, metalic, AC single phase 230/240 volts of size 150 mm sweep with fly guard /louvers shutters including provision of suitable size of flexible cable fron ceiling rose or connector to exhaust fan and anchoring arrangement in the provided space to fix the fan including taking down the old exhaust fan and providing suitable hole in stone masonary wall for fixing of exhaust fan and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified and as directed. Make : Havells (Ventil Air DX) or equivelent in Bajaj/CG.

S & F in repairs, wall mounted 10W LED 6K 600x24x35 (LXWXH) light fitting, 2' with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips/CG.

S & F in repairs, wall mounted 22W LED 6K 1150x24x35 (LXWXH) light fitting, 4' ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG.

Taking down of unserviceable building lights of any type, Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make: Havells equivalent in Philips/CG

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit, Cleaning the Storage tank and painting with one coat of synthetic enamel paint and refixing in its original position including replacing the rusted nut bolts, u/s inlet / outlet water pipes, u/s indicator red & green, u/s geyser element upto 3.0 KW, Provision of Additional Glasswool and testing on completion complete all as Specified and as directed by the Engineer-in-charge.

M&L Sub main wiring complete with two runs of 10.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 10.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 10.0 sqmm cable conductor, one run of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete all as specified and as directed by the Engineer-in-charge. Make-Havells/Legrand/Schneider.

S&F MCB distribution board double door type, SPN 8 way sheet steel powder painted with bus bar neutral link earth bar etc. Make: Havells/Legrand/Schneider

Supply & fix, MCB SPN 63 Amps 240 Volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed by the Engineer-in-charge. Make: Havells/Legrand/Schneider

Supply & fix MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge. Make: Havells/Legrand/Schneider

M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No. 03 of SSR part I 2009 complete all as specified and as directed.

M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 4.0mm dia galvanised iron or steel wire , complete all as specified and directed as in repairs.

Supply, laying / fixing of GI Protection pipe, 40 mm dia, light grade, complete all as specified and directed as in repairs.

KOGANTI CONSTRUCTION COMPANY

K LAKSHMAN SINGH AND CO

SAI RUPA CONSTRUCTIONS