Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹27.8 L
EMD Value
₹28,000
Closing Date
19 Oct 2026, 3:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SE PR KHAMMAM
BESIDE ZP QUARTERS KHAMMAM
C/o CC Road from Eeda Nagabhushanam(H) to Kavoori Anjaiah Kirana of Thummalapalli(V) (GP) in Penubally Mandal, Khammam District. Est.Cost. Rs.35.00 Lakhs
740879
NIT No.534/2026-27/SCCL CSR dt:03-10-2026 (1st Call) of SE PR Khammam
OPEN
Road and Drainage Work
KHAMMAM, TELANGANA
11 documents required · 10 mandatory · 1 optional
₹986
₹28,000
9 Oct 2026
9 Oct 2026
9 Oct 2026
Providing levelling course with HBG Stone chips of size 2.36 mm & below and Spreading in uniform layers including watering and tamping etc complete incluidng cost and conveyance of all materials and all labour charges etc complete.
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 of M20 Grade of Nominal Mix 1:2:4 Proportion, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
Contraction Sawn joint groove(using diamond studded blades)2mm wide and 1/3 depth of the Cement Concrete Pavement(slab).These grooves shall be cut when the concrete is greenish
Collection& Supply of natural occuring Selected earth on road side with dept.guage including spreading as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for Shoulders
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ,including overhead charges & Contractors profit but excluding VAT. & Seigneorage charges. For Laying of RCC Pipes.
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. Tech Specification Clause 1106 MORD ,including overhead charges & Contractors profit but excluding VAT. & Seigneorage charges. 1000 mm dia.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
534-Schedule.xlsx
TENDER_DOCUMENT • 2.45 MB
534-SBD.docx
TENDER_DOCUMENT • 0.24 MB
07 SELF DECLARATION.docx
TENDER_DOCUMENT • 0.01 MB
08 LITIGATION HISTORY TEMPLATE.docx
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .