ELECTRIFICATION OF EXTENDED PATHOLOGY BUILDING AT NALCO HOSPITAL DAMANJODI

Amount

Concealed wiring of Light/Fan point with 2.5 Sqmm multistrand cupper wire, Supply, laying and wiring with 2.5 Sqmm multistrand Finolex make copper wire of approved quality in 25mm black PVC pipe and 2" height JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth, supply and fixing of14 SWG required size MS box with 3MM thick white hylam cover including 4 Nos steel screw and cup washer, ceiling rose, holder, 5A switch etc. wherever required complete with fittings. Each fan point shall be controlled by one switch and two light point shall be controlled by one switch. All materials shall be supplied by party and work shall be carried out as per direction of the Engineer-in-Charge

Short Point( Up to 3 meters)

Medium Pont ( Up to 6 meters)

Long Pont ( Up to 9 meters)

Extra Long Point ( Above 9 meters and up to 15 meters

Supply and fixing of 5pin 240 Volt 5 Amp socket(5 pin) & 5A switch on Board and wiring with 2.5 Sqmm multistrand copper wire of approved quality and earthing connection of third pin with 2.5 Sqmm copper wire(Green colour) as required on existing Board and as per direction of Engineer-in-Charge.

Consealed wireing to 15Amps plug point with 6 sqmm Multistrand PVC insulated single core copper conductor wire including supply of 15AMPS switch and sockets in 25mm black PVC conduit pipe with one run of 2.5sqmm copper wire as continious earth with required size of 16SWG MS box with 3mm thick with white hylem cover and including 4nos of steel screws and cup washer with fitting as required and as per the direction of EIC.

Medium Pont ( Up to 6 meters)

Long Pont ( Up to 9 meters)

Extra Long Point ( Above 9 meters and up to 15 meters

Supply, installatoin, testing and commissioning of prewired wall/ceiling/false ceiling mounted LED light fixture complte including providing 2 nos of wood round blocks for fixing the fitting and down rod as required, and supply and laying of 3cx1.5 sqmm flexable copper cable as required and as per direction of Engineer-in-Charge.

18w LED tube light fixtures

Sub-main circuit wiring: Supply and laying of multistrand copper wire of approved quality inside 25 MM independent black PVC conduit pipe 2" height PVC JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth. The job includes termination of both ends through proper jointing materials. All the materials shall be supplied by the party. The work shall be carried out as direction of EIC..

2(1x6 Sqmm) Copper wire

2(1x2.5 Sqmm) Copper wire

2(1x4sqmm) Copper wire

Supply, installation, testing and commissioning of 1200mm sweep 220/240 Volt ceiling fan including fan hook, suspension rod of required length, earthing, electronic regulator including supply and laying of 3cx2.5 Sqmm Flexable copper wire as required and asper direction of the Engineer-in-Charge.

Supply, installation, testing and commissioning of 300mm sweep 240 Volt Exhaust fan including making holes on walls providing necessary brackets/support for fixing the fan, making necessary connections, poroviding gravity drop louvers etc. finishing the hole necessary civil works as required and as per the direction of Engineer-in-Charge.

Supply and installation of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. Detailed specificatiobn shall be as per annexure-II and all material required for installation of chemical earthing shall be under the scope of the party.

Supply and installation of earthing strips 25x3mm along trenches including excavation, cutting and fixing to wall, embedding inside walls and floors welding at joints, providing anti-corrosive paints of bitumin and jute covering for welding, clamping, necessary hardware for connection etc. including all labour and material complete as required and as per direction of Engineer-in-Charge.

Laying of PVC insulated and PVC sheathed 1.1KV grade Aluminium power cable confoming to IS:1554 at under ground trench/direct on wall through pipes, clamping including supply of clamps etc. as per direction of EIC. Cable shall be supplied by Nalco as free issue item.

Up to 3.5cx70 Sqmm AYFY

Excavating trenches 800x400mm wide for laying of cable, supply and filling of sand 75mm below and 75mm above the cable with brick protection on nthree sides of cable , back filling the trench and restoreing to original shape , disposing the surplus earth to out side premisess.

Termination of PVC insulated and PVC sheathed power cable of 1.1KV grade of following size, including supply of nickel plated double compression cable gland and crimping type socket, stripping of insulation, fixing of cable gland, core marking, crimping cable, including supply of all labour and materials complete as required and as per direction of Engineer-in-Charge.

Up to 3.5cx70Sqmm AYFY

Supply and installation of 65mm dia medium gauge GI pipe on floor/wall/along poles including supply of MS clamps fasteners complte as required and as per direction of Engineer-in-Charge

Supply, installation, testing and commissioning of Industrial power socket with 20A MCB with top complete box etc,

Supply, Imstallation, testing of MDB as per following specification including terminatiion of out going and incomeing cables/conduits/PVC pipe/wires required earth connection , glanding with supply of gland suitable for 3.5/4 core X70sqmm Al, Ar cable complete including transportation , all labour suply, sundry materials like rag bolt ,cement etc as required and as per direction og EIC. SPECIFICATION : Pre wired MDB type incomer 63A TPN MCCB, out going 4 nos DP load contact of 32AMPS, 5 nos SP MCCB of 20A, and 5 nos of SP MCCB of 10A. Rating: Bus Bar 1set with suitable neutral link and earthing link etc. complete with all components for out going feeder.

Supply, installation , testing and commissioning of prewired wall mounted 90W LED street light fixture with supporting assoceries including providing and fixing of GI bend pipe approximate 1.5meter length with junction boxes etc as required and as per the direction of EIC

MISHRA ELECTRICAL SERVICE

S K ENGINEERING WORKS

BASUDEVI ERECTOR

CHINTAMANI ENTERPRISES

RRR PERESTROIKA

M/s RAJKISHORE MISHRA

SUNIL KUMAR BISWAL