ADDN/ALTN OF BLDG NO SS-25, P-71, P-72, P-81, P-83, PROVN OF GARBAGE BIN ALUMINIUM DOOR AT CERTAIN LOCATIONS, SPECIAL REPAIR TO POST TOP AND BOLLARD LIGHT INTO ENERGY EFFICIENT LED LIGHT WITH CONNECTED ELECTRICAL WORKS INSIDE FORT WILLIAM UNDER GE

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Surface excavation n.exc 30 cm deep and averageing 15 cm deep and getting out soft and loose soil.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Returining filling in including spreeding levelling, watering and well ramming in layers n.exc. 25 cm complete all as specified and directed.

Removing excavated soil n.exe 50 mtr distance and depositing at level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for P.C.C (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for P.C.C (1:2:4) type B2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base etc. complete all as specified and as directed.

M&L for 150 mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

S&F in repairs Vitreous China urinals, bowl type, flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and Union for discharge pipe incl taking down existing urinal complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0501 / HINDWARE, Cat No. 60001 / CERA, Cat No: S4020103 or equivalent model in JAQUAR)

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and as directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / PRAYAG, Model : Smart or equivalent model in COMMANDER / CERA)

S&F in repair Chromium plated brass Pillar tap with aerator, fixed to wash hand basin, complete all as specified and directed. (Make: Essco, Cat No: MQT-507 / PRAYAG, Cat No: 7202 / JAINKO, Cat No: PCJ-1)

S&F in repair Chromium plated brass Bib cock, long body with wall flange & aerator, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: MQT-512 / PRAYAG, Cat No: 7209 / JAINKO, Cat No: LNJ-1)

S&F in repair Chromium plated brass Angular stop cock concealed type fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526 / PRAYAG, Cat No: 7210 / JAINKO, Cat No: AVJ-1)

S&F in repair Chromium plated brass 2 way Angular stop cock concealed type fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526AF / PRAYAG, Cat No: 7211 / JAINKO, Cat No: ACJ-1)

Supply and fixing, in repairs, 15 mm bore stop cock (surface type), cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. (MAKE : ESSCO, Cat No : DLX-513A/513B / PRAYAG, Cat No : 7226/7228 / JAINKO, Cat No: FSE-1/FSI-1)

Supply and fix in repair Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

S&F in repair acrylic bathroom cabinet box with mirror of size 330 mm X 430 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 551 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

Taking down or up 15mm bore galvanised iron pipe and connection as directed.

-ditto- but 20 mm bore GI pipe

-ditto- but 25 mm bore GI pipe

S&F 15mm bore galvanised iron pipe, medium grade with all fittings after cleaning fixed to wall/ceiling or lain in floors all as directed.

-ditto- but 20 mm bore GI pipe

-ditto- but 25 mm bore GI pipe

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surface incl racking out joints, hacking for key, scrubbing down with water etc all as specifed and directed by Engineer-in-charge.

Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.

M & L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed.

M & L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:4 all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6), finished even and smooth without using extra cement to fair face of brick wall / concrete wall surface, complete all as specified and as directed.

Material and labour for 10 mm thick rendering in cement mortar (1:4), finished even and smooth without using extra cement on ceilings, complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4), finished even and smooth without using extra cement to fair face of brick wall / concrete wall surface, complete all as specified and as directed.

M & L non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and including 15 mm thick screed bed in cement mortar 1:6 all as directed.

S&F glazed ceramic coloured tiles 350x250/300x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster with rough finished surfaces in cement mortar 1:4 to received tile complete all as specified and directed.

M & L glazed ceramic coloured tiles 300 x 300 x 7 to 8 mm thick, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and including 15 mm thick screed bed in cement mortar 1:4 all as directed.

M & L glazed ceramic white tiles 300 x 200 x 7 to 8 mm thick, fixed on walls etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and including 10 mm thick screed bed in cement mortar 1:4 all as directed.

M&L for Chequered cement concrete tiles (coloured), bullnosed 32 cm X 19.85 cm x 30 mm thick as in treads, set, jointed & pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

S&F 100mm long aluminium alloy butt hinges, type B-21 with galvanised mild steel hinges complete all as specified and directed.

S&F 150mm long size (ISI marked ) aluminium anodised barrel tower bolt of extruded section as directed

S&F 150mm size aluminium anodised handles (cast type) anodised as directed

S&F steel ventilators with centre hung shutters including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and directed.

S&F 5mm thick sheet glass ordinary quality in square n exc 0.5 sqm in each pane, fixed in aluminium joinery with rubber gasket complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame of approved colour for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges types B-21 100 mm long (2No) suitable handle (1No) complete all as specified. (NOTE: Glass shall be measured and paid separately)

Material and labour for applying two coats of acrylic distemper over a coat of primer on newly surfaces of walls including necessary preparation of surface complete all as specified and directed.

Material and labour for 2 coats of oil bound distemper over a coat of primer on internal plastered surfaces including one coat of putty (minimum thickness 1.5mm) after preparation of surfaces complete all as specified and as directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specied and directed.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specied and directed.

M&L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specied and directed.

M&L Preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for applying one coat of acrylic distemper to old decorated surfaces of wall including preparation surfaces complete all as specified and directed.

M&L Preparation of old surfaces of wall and applying one coat of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering Gde Fe 410 W complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as direceted by Engr-in-Charge.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F PVC solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

M&L Preparation of new steel surfaces and applying two coat of synthetic enamal paint over coat of red oxide complete all as specified and directed.

S&F aluminium snap grid made of aluminium main `T' 38x25x2mm thick and cross Tee and angle of section 24.5x24.5x1.4mm thick incl proper hanging arrangement complete all specified and directed. (NOTE: Hanger and ceiling board shall be measured seperately)

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

S & F 6 mm thick non asbestos fiber cement building board fixed to GI /Aluminium frame works in ceiling complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

Supply and Fix galvanized, corrugated mild steel sheeting 0.63 mm thick, with minimum zinc coating of 275 grams/Sq m, grade of corrugation depth Gde”B”, with two corrugation side laps fixed with coach screws and washers complete all as specified and directed.

S&F Optimiser Steel Storage System push-pull type with two single last unit in one row and two single unit in one row, duly fixed as per manufacturer specification complete all as specified and directed. (MAKE : BOMBAY SAFE/ NILKAMAL/STEEL N STYLE/DURIAN)

SCHEDULE 'A' PART-II (E/M WORKS) Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site complete all as specified and directed.

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No. 2.03 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 2.03 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 2.03 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

S & F new Switch piano, flush type complete all as specified and directed.

S & F new socket outlet, flush type complete all as specified and directed.

S&F new switch socket combination outlet, 3 pin 5 Amps flush type complete all as specified and directed.

S & F new switch socket combination outlet, multipurpose 3 pin, 15/16 Amps flush type with indicator lamp complete all as specified and directed.

S&F new Bell push, flush type complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator, flush type, 230 Volts, 5 speed control complete all as specified and directed.

S&F lamp holder with back plate suitable for batten/pendant fittings or to be mounted on walls complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S&F Call bell, musical type, single pole, 240 volts complete all as specified and directed.

S&F surface mounted LED luminaire, 1 X 20 Watt, 230 Volts, minimum 110 lumen/watt in aluminium housing, with polycarbonate diffuser & integrated electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE: CROMPTON, Model: BRIGHT LINEA / HALONIX, Cat No: HLB-03-20-CW-AL-HL1 or equivalent model in other makes specified in tender)

Supply and fixing TPN DB, IP 43 protection, double door, 415 volts, 4 way (8+12) complete all as specified and directed. (MAKE : L&T, Cat No. DBTPN004DD / SCHNEIDER, Cat No. A9HTND04 / HAGER, Cat No: VYT04DH / BCH, Cat No: BCHHTPNDD04W / C&S, Cat No: CSDBTPNHPDD04 /ABB, Cat No: E-SHDB M4 or equivalent model in HAVELLS / INDO ASIAN (OPTI PRO) / HPL / LEGRAND)

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D / C&S, Cat No: CSDBSPNPDD08 / BCH, Cat No: BCHSPNDD08W / HPL, Cat No: MDBDD08 / HAVELLS, Cat No: DHDPSHODRW08 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / C&S, Cat No; CSDBSPNPDD04 / BCH, Cat No: BCHSPNDD04W / HPL, Cat No: MDBDD04 / HAGER, Cat No: VYS04D / HAVELLS, Cat No: DHDPSHODRW04 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

Supply & fixing MCB, 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with two runs of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC casing-caping of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

All as per Srl. Item No. 2.24 above but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor in PVC casing capping (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

S & F modular Socket for AC short circuit protection motor starter with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator complete all as specified and directed. (Make: WIPRO (North West), Cat No: ACPU6M-BT or Equivalent in LEGRAND /ANCHOR (WOODS) /Schneider/ ABB )

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

S&F in repair Bracket/Arm suitable for street light fittings, made out of 32 mm bore (light grade) GI pipe length not exceeding 1.2 metre long, fixed with 02 sets of flat iron clamp of size 25mm x 5 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer incl taking down existing bracket complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repairs LED Street Light fitting 25W, efficacy of minimum 110 lumen/watt, in pressure die cast aluminium housing with lens and toughened glass, IP 66 protection incl taking down existing fitting complete all as specified and directed. (Make - CROMPTON, Cat No: LSTS-25-CDL-M / HALONIX, Cat No: HLSLD-09-25-CWL-R-HL2-or equivalent model in other makes specified in tender) (NOTE: Wire for electric connection shall be measured and paid separately)

S&F PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs complete all as specified and as directed.

S&F PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 2.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs complete all as specified and as directed.

Taking down street light/security light fitting/bolard, any wattage or size, and removal from site complete all as specified and directed.

Supply and fix LED decorative post top for 360 degree indirect light with IP 65 protection, resistant to impact and corrosion, glare free type complete all as specified and directed. (MAKE: Crompton Greaves, Cat No LPTO-40-CDL (Model: MAPLE) / BAJAJ, Cat No:BGCT W4 LED WW / HALONIX, Cat No: HLPT-04-40-CW / SURYA, Cat No: SLE PT 40W-ETPP / MAGIK, Cat No: APBY040C) (NOTE : Wire for electrical connection of the luminaire shall be measured and paid seperately)

S&F LED post top luminaire, 45 watt, made in die cast aluminium housing, designed for indirect symmetrical light distribution with high power COB LED as light source, IP 65 grade protection incl constant current driver and other accessories complete all as specified and directed. (Make:- BAJAJ, Cat No : BRIL 45W LED NW / CROMPTON, Model: FERN or equivalent model in other makes specified in tender) (NOTE : Wire for electrical connection of the luminaire shall be measured and paid seperately)

Supply and fix LED Flood Light fitting 120W pressure die cast housing with heat sink & aluminium extrusion with secondary optics, front toughened glass, brackets. driver etc, IP 66 protection complete all as specified and directed. (Make - CROMPTON, Cat No: LFLN-120-CDL-60-M / BAJAJ, Model : BJFL 120W LED I WW / SURYA, Cat No: SLE FL 120W IP66 LUMOS / HALONIX, Cat No: HLFLD-ML 01-120-CWL-R / HAVELLS, Model: JETA IRIS / JAQUAR, Cat No: LFLD02S0120XW / CENTURY LED LTD, Cat No: FWZP120W / PANASONIC, Cat No: PFLM11CD8) (NOTE : Wire for electrical connection of the luminaire shall be measured and paid seperately)

S&F 50W LED Flood light fitting, in die cast aluminium housing with lens, IP 66 protection with front toughened glass, brackets etc complete all as specified and directed. (Make - HAVELLS, Cat No: JETAQUANTOPLUSFLP50WLED757SYMLENS / HALONIX, Cat No: HLFLD-ML 21-50-CWL / BAJAJ, Model : AMAZE LED / CROMPTON, Cat No: LFL-50-CDL/60-M / SURYA, Cat No: SLE FL 50W IP65 RFLOOD / JAQUAR, Cat No: LFLD02S050XC) (NOTE : Wire for electrical connection of the luminaire shall be measured and paid seperately)

Material, Labour in repair of earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below the normal ground level, connected with and including galvanized earth strip of size 32 x 6mm thick connected to main test point as directed as earthing lead by means of nuts, bolts, washers of galvanized iron protected by 40mm dia (light grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (medium grade) watering pipe including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @15 cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternative layers including necessary excavation and earth work in soft/ loose soil all as shown in Electric Plate No. 3 of SSR Part - I and testing on complete all as specified and directed. Notes (i) The unit rate shall include for GI water pipe, protection pipe, wire mesh, funnel, excavation, RCC pit cover, PCC, test point, earth srip from top of earth plate upto 7.5 metre ground level. (ii) PCC pit shall be provided at least 1.5 mtr away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fixing junction, elbows etc. shall be deemed to be included in the unit rate.

Taking out unserviceable LT panel board / FEEDER PILLER box (of any size) and Supply, install, commissioning and testing of Indoor type LT panel board, cubical type, dust and vermin proof, made out of 2 mm thick CRCA sheet of size 950 mm x 750 mm x 500 mm, fabricated in a CPRI approved factory, with front and back openable door (with locking arrangement) and making compartment for each MCCB/change over switch separately, duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer inclusive of four numbers copper bus bar 400 Amps of suitable size (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland),and two numbers Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with angle iron frame with base 50X 50X 6 mm with legs not more then 60 cm including grouting with P C C complete all as directed by the Engr-in-Charge including supply and fixing of the following accessories :-

Copper bus bar 630 Amps (size 40mm x 10mm x 400mm) capacity - 4 Nos

MCCB (Incoming) 250 Amps, 4 Pole, 25 KA, Ics= 100% of Icu - 01 No (Make : L&T, Cat No: CM90642OOPO / LEGRAND, Cat No: 420219 / C&S, Cat No: CSC4N4 or equivalent model in other makes specified in tender)

LED indicating Lamp with holder for main & standby supply indicating RYB (Set of three) - 01 Set

MCCB (Outgoing) 100 Amps, 4 Pole, 16 KA, Ics= 100% of Icu - 02 No (Make : L&T, Cat No - CM90518OOKO / LEGRAND, Cat No: 420015 / C&S, Cat No: CSC2N4 or equivalent model in other makes specified in tender)

Note:-(i) All incoming and out going cables, duly thimble along with suitable size of brass cable glands, to be connected to accessories. (ii) All MCCBs to be connected internally with suitable size of copper strip.

DEB AND COMPANY

ARJUN DAS VALECHA

GHOSH ENTERPRISE

S.K. TRADERS

MS AP CONSTRUTION AND CO

M A ENTERPRISES

JOY-EN-JOY