work installation of closed combustion cremation furnace under budget declaration 2026-27

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

SITC of Antyesthi Yantra with following Specification. (A) Body MS. Sheet size 3mm & 2mm angle structure 50*50*5mm MS (B) Lining Fire bRick alumina 30% with ceramicsboard thickness 50 mm capacity 1260 C. (C) White heat Castable (k) and accost (50) for fire bricks feting (D) Angle 65*65*10 & 35*5 SS 304 grade (E) Rod 30 mm 370 mm SS 304 grade (F) Pipe OD 40mm thickness 5mm SS 304 grade (G) Ceramic Blanket (64D) total bolts & nut MS / SS (H) Thermostat Size 20mm OD *450 mm length (I) Control Panel auto and Manual Both with change over/2-way switch (J) Blower complete wiith fan size 305 mm with 1 HP Moter nos 2 (K) Chimini Lenth 3- meter size 350x350mm taper sheet thikness 3 mm with ceramic board lining. (L) Ceramics board fitting 50 mm and 25 mm (M) Both side SS door with lock size - 600 x 550 mm thickness 4 mm SS 304 grade 50 mm ceramic board and ceramic blanket (N) Sliding Trolly alignment bed angle size 50x50mm + 35x35mm + strip, length 4.5 meter (O) Sliding Trolly cover 1750 x 1 180 x 440 mta sheet size 3 mm with bearing roller Pipe size 7sx75 mm, 40x40mm & round 40 mm ceramic board & ceramic blanket lining. (P) Sliding Asthiya & Ash collecting Trey Size 2200 x 350 x 110 mm sheet thickness 3 mm with roller SS 304 grade (Q) Coated with heat resistance paint with capacity of 600 degree silver color (T) Two step febricated checker plate and angle size 6 x 2x1 qty inculding loading , unloading and transportation ele.

SITC of Inverter with batteries with: , O/P Voltage: 220 V , O/P Current: 12 Amp AC Nominal , I/P Current: 12 Amp AC max. , O/P Power: 2 KVA ,Power Factor: 0.8 , Frequency: 50 Hz inculding 12 V 150 Ah Batttery Rack and battery bank comprising SMF/VRLA batteries , inter-connection wiring etc. as required complete in all respect.