SR TO RB IN JUDGE HOUSES SECTOR 24, CHANDIGARH (STEEL WORK AND OTHER MISC WORKS)

Steel work in built up frame made of / M.S. flat / M.S. pipe / M.S. angles of various sections including cutting, hoisting fixing in position and applying a priming coat of approved steel primer and two coats of snthetic enmael paint, welded and bolted including special shaped washers etc.. The work is required for making security wall jaffery/ ladder/grills/ frame work for shed or sunshade / other mis work.The steel work is to be provided at the site of the building complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing 1.5mm thick polycarbonate sheet to be fixed on the existing MS frame with self drilling machine screws complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 3.0 mm thick clear polycarbonate sheet to be fixed on the existing MS / wooden frame with self drilling machine screws / complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @0.90 Itr/10 sqm).

French spirit polishing : One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 60 mm thick high density rubber moulded precast cement concrete paver block grey/ colored/ polished/ designer (manufactured by vibro hydraulic pressure process) consisting of design mix of cement, sand and fine aggregate having designation M35 ISI marked including the cost of good quality color and hardening agents. The paver should be compiled with tensile strength and breaking load as per BIS 6717-1993 and shall be tested against resistance to bear as per IS 1237-1980 (specification for cement concrete floor tiles). The paver should be laid over layer of 25 mm average thick screened coarse sand to the required slope and filling the joints with fine sand complete in all respects and to the entire satisfaction of Engineer in charge.