SPL REPAIRS TO MAIN GATE UNDER AGE BR II GE BRICHGUNJ

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foudation etc, or for shafts, wells cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete.

M & L cement concrete type C-2, 1:3:6, using 40mm graded aggregate as in foundations, fillings and mass concrete.

Use & waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for fair finished flat surfaces of concrete complete all as specified and directed.

Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete M-30 (Design Mix ) 20mm graded aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc

M&L for Reinforced cement concrete design mix M-30 in slabs supported on walls, beams & columns complete all as specified and directed..

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.290. Gde-E-165,

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified and directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. .

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding/ vally gutter to wall or in door, fixed with self tapping screws complete all as specified and directed.

Design, Supply and fixing at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, columns, MS structure, ceiling, coping, slab projectons at all heights and elevation including necessary aluminium framework. The aluminium composite panel should 4 mm thick consist of 3mm thick thermoplastic core of anti toxidant LDPE sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint.NOTE:- The system shall be designed to withstand a wind pressure of 190 kg/Sqm with necessary Alu. sub frames, cleats and shall be fixed to the masonry/ RCC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be in Indian standard grade. all joints of ACP must be sealed with approved sealent of approved colour. sealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylene backer rods, weather sealant etc, all materials and labour complete.

S&F PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls including band as required complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce complete all as specified and directed.

M&L for PCC 1:2:4 type B2, using 40mm graded aggregate of 100mm thick as in hardstanding and footpath complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed.

M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately)

M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-40Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately)

M & L for Sand filling under floors or in foundations including wateringand consolidation complete all as specified and directed.

Dismantling of Dismantling boarding, any description, fixed in any position with nails and any thickness, fixed in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar complete of any description complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement all as specified and Directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed.(Make Apex Ultima)

Spreading and levelling in layears n. exc 25cm thick and well ramming including watering all as specified and directed

M&L for 8-10mm thick Heavy duty parking tiles in Parking area of any shape, area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including Screed bed of coat 20mm thick CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs, pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite of any type work (like mitering/ bevelled Edge, Vneering) for Wall Clading, Riser In steps, jambs, pillars, and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Rendering of 10mm thick CM (1:4) complete all as specified and directed.

S&F exterior grade aluminium composite panel sheet of 3mm to 4mm thick, fixed on aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant for required portion, complete all as specified and as directed.(The cost of Aluminium frame work given in the item shall be deemed to be included in the rate quoted)

M&L forJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 290 (Gde E-165) complete all as specified and as directed.

M & L For FRP Man Hole Cover size 450mmx450mmx25mm thick or 600mmx600mmx25mm thick for the capacity of 3 ton covered with drain / man holes as per the site requirement all as specified and directed. ( Colour and Make approved By GE)

Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed forthe following:-One light point controlled by one switch

All as per item no 43.00 here-in-before but for One 3 pin switch socket outlet point 5 amps on independent board

All as per item no 43.00 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed.

Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed.

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "C" series complete all as specified and as directed.

Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and as directed.

Supply and fix Recess mounted LED slim 20 w Round type downlighter with die cast aluminium housing prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply and fix weather proofwith IP 67 LED Inground Lights of 5W with surge protection up to 2KV complete all as specied and as directed.

Supply and fix LED Bollard light with IP 66 of 10 W LEDs made up of aluminium casting with acrylic diffuser for soft illumination effect complete all as specified and as directed Make:Havells LED bollard light CAT NO:TURNBLS10WLED857PSYMTOPC or equivalent in C&Ss / Philips

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core completed all as specied as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core completed all as specied as directed.

S & F in repairs SMC junction box of inner size 140X140X95 mm , light weight including 4 way Connector block of 16A rating ,with 6amps MCB fixed on pole/Wall/ Panel using necessary fasteners all as directed and as specified.

S & F in repairs SMC junction box of inner size 400X300X190 mm , light weight including 4 way Connector block of 63A rating ,with 6amps MCB fixed on pole/Wall/ Panel using necessary fasteners all as directed and as specified.

Supply and lay HDPE double wall corrugated pipes and including fittings such as couplers, bends, end caps etc., ISI marked of outer dia of 40mm and inner dia of 32mm polyethylene with smooth internal and profile external surface for non pressure under ground cable complete all as speciedd and as directed.

M & L in repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

MST BUILDERS

Prasur Electricals & Engineering Co.

Kakolil Trade Agencies

M/s S A Traders

bansal construction

M/s SHIVA BUILDERS

M/s Pooja Enterprises

OPS Associates