QUANTUM OF WORKS INVOLVED IN SHIFTING OF 11 KV AND L.T. LINE WITH POLE AND TRANSFORMER FROM GANDHI NAGAR TIRAHA TO BADA CHAURAHA DUE TO ROAD WIDENING UNDER THE FULL DEPOSIT SCHEME UNDER THE AREA OF THE EDD-I UNNAO.

Amount

Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

S.T. Pole 11 mtr long

Other loose line materials with including conductor, Single and double Pole accessories, complete stay & earthing, insulator, diff. Channel & Angle, distribution box, x-arm, etc. from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

ACSR Rabbit Conductor

L.T. A.B. Conductor 3x120+1x95+1x16 sqmm

11 KV XLPE Cable of size 3x185 sqmm

O/D Cable Jointing kit 3x185 sqmm

L.T. XLPE Cable Al. 1x630 sq mm

Dismantling of existing old O/H L.T. line including rolling back its conductor/G.I. wire from work site to dump site.

Dismantling of existing old O/H 11 KV Line including rolling back its conductor/G.I. wire from work site to dump site.

Dismantling of existing old Pole and X-arms, brackets, Insulators, Channels and all hardware fittings.

Fabrication/Modification of MS Items/Nuts & Bolts as requirement of site condition

Erection of ST double pole (11 KV) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

Clamp for Top and Dropper channel with N&B

Erection of ST Single Pole (11 KV) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

11 KV F-Clamp with N&B

Cross Arm Holding Clamps

Erection of ST Pole (LT Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

Suspension Clamp for ABC

Dead End Clamp for ABC

L.T. Clamp with Nuts & Bolts

Eye Hook

Piercing Connector

Making T-off arrangement including fabrication & fitting of accessories.

Supply & Fixing of following materials for above job-

Holding clamp for T-off Channel with N&B

Grouting of ST Pole as per RESPO Norms with grouting materials.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Supply & Fixing of following materials for above job-

Stay Clamp with N&B

Stay Insulator

Laying stringing and sagging of O/H 11 KV Line Three Phase by Conductor including all associated work with joint/jumpers and binding of insulator as required.

Laying stringing and sagging of O/H 11 KV Line Three Phase by XLPE Cable including all associated work with joint/jumpers and binding of insulator as required.

Fixing of cable jointing kit of diff. size

Laying stringing and sagging of O/H Three Phase L.T. Line by ABC of diff. size including all associated work with joint/jumpers and binding of insulator as required.

Fixing of 3-Ph. Distribution Box with clamp, N&B with complete all work as required. (All the required materials as DB Box Clamps, Piercing Connectors, Nut & bolts etc for this job shall be provided by the contractor except Distribution Box)

Supply & Fixing of following materials for above job-

Clamp for Distribution Box with nut & bolt

Stringing and sagging of 2 wire of 6 SWG GI wire for guarding and making lacing at one meter part in all span between all support including carriage from dump site to pit site with complete all work as required.

Supply & Fixing of following materials for above job-

Holding clamp for Guarding Angle with N&B

Opening of H.V./L.V. connections on existing 400 KVA Transformer and Dismantling of Transformer by hydra from existing damaged Plinth with Safe Carriage along with loading unloading and propoer stocking.

Fixing of 11 KV D.O. Fuse Set at Double Pole with D.O. Fuse mounting Channel, clamps and nut & bolts including all associated work.

Supply & Fixing of following materials for above job-

11 KV D.O. Fuse Set

D.O. Fuse mounting Channel

Clamp for mounting Channel with N&B

Construction of masonry type T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.5 mtr x 1.5 mtr x 1.5 mtr (LxBxH) solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth as per RESPO norms. (All the material will be arranged by the contractor)

Reparing of existing old & jarjar Transformer Pilnth as per required at site to maintain the height of plinth 1.5 mtr with first class bricks, cement, coarse sand and brick ballast, filling of sand in the hallow space, plastering of surface in the ratio 1:2:6 & top of the plinth for thickness concealing as per RESPO norms. (All the material, labour and T&P will be provided by the contractor)

Placement of 400 KVA T/F by hydra on newly repaired T/Fs Plinth with installation and commissioning of T/F. All the jumpering & connection with the system are included in the scope of work.

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 400 KVA T/F and All the jumpering & connection with the system are included in the scope of work.

Supply & Fixing of following materials for above job-

Al. Lugs for 400 KVA T/F @ 04 nos. for each T/F

Copper L-piece of appropriate size @ 04 nos. for each T/F

Insulated Lead of Single Core Al. Cable of size 25 sqmm for HT side connection @ 30 mtr for each T/F

Earthing of Neutral of Transformer & Transformer body by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 40 ft. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X5 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral & Body connection being done by G.I. Strip as per RESPO norms . (All the material will be arranged by the contractor)

Fixing of L.T. Tailless Fuse Unit with 01 nos. I/C and 03 nos. O/G Circuit arrangement by erection & fabrication of Distribution Pillar Box Pinth and LT Distribution Pillar Box including all associated work as per RESPO Norms. (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

Distribution Pillar Box Pinth

Henley type tailless unit of 500 Amp @ 03 nos. for each LT Fuse Unit with fuse wire of appropriate rating

LT Distribution Pillar Box with Canopy type top along with front & back opening double door with locking arrangement made of MS Sheet

Copper bus bar of appropriate size @ 03 nos. for each LT Fuse Unit

Al. Bus bar of appropriate size @ 01 nos. for each LT Fuse Unit

Al. Lugs/Clamps of diff. sizes @ 16 nos. for each LT Fuse Unit

Painting of LT Pillar Box with 02 coat red oxide paint and 02 coat enemal red paint.

Laying of LT PVC Cable of size 1x400 sq mm from Transformer to LT Fuse Unit system including all associated work. (All the required materials for above job shall be provided by contractor except LT PVC Cable)

Fabrication and erection of Distribution Transformer fencing around Transformer and L.T. Distribution Pillar Box including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10SWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust as per RESPO norms. (All the material will be arranged by the contractor)

Cleaning of 11/0.4 K.V. Sub-Station removal of garbage dump and its stacking outside/inside the fencing area.

Cleaning of 33/11 K.V. Sub-Station removal of garbage dump and its stacking outside/inside the Sub-Station area.

Scrubbing, rubbing, cleaning and painting of Single & double Poles structure, one coat with red oxide and two coats of Aluminium paints (ISI mark paint)

Scrubbing, rubbing, cleaning and painting of wiremesh fencing structure, one coat with red oxide and two coats of Aluminium paints (ISI mark paint)

Safe Carriage of existing old O/H L.T. line from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

Safe Carriage of existing old O/H 11 KV Line from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

Safe Carriage of existing old Pole and X-arms, brackets, Insulators, Channels and all hardware fittings from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

NOTE:- (1) All the material provided by contractor shall be as per norms of UPPCL/RESPO. (2) One carriage including loading/unloading from dump site to pit site is included in scope of work. (3) During execution of work all risk will be of the contractor. (4) Contractor will provide all T & P, vehicle and man power. (5) All the old and used material should be taken on book. (6) The quantity may be vary ±20%.

M/s PRAMENDRA SINGH (BID ID -4948403)

Pankaj Trading Company (BID ID -4951385)