Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹87.3 L+₹95,994.92 (1.10%)Accepted-AOC | ₹87.3 L+₹95,994.92 (1.10%) Quoted ₹88.2 L | L2 | Accepted-AOC Technically qualified L1 bidder |
| 2 | L1₹87.3 LRejected-AOC | ₹87.3 L | L1 | Rejected-AOC Technically qualified L2 bidder |
| 3 | L3₹89.4 L+₹2.1 L (2.41%)Rejected-AOC | ₹89.4 L+₹2.1 L (2.41%) | L3 | Rejected-AOC Technically qualified L3 bidder |
| 4 | L4₹91.2 L+₹3.9 L (4.44%)Rejected-AOC | ₹91.2 L+₹3.9 L (4.44%) | L4 | Rejected-AOC Technically qualified L4 bidder |
Tender Value
₹97.0 L
EMD Value
₹1.9 L
Closing Date
11 Mar 2020, 2:30 pmClosed
CEO, GMDA
Bhangagarh, Guwahati-05
Renovation and Improvement of Parikhit Pond at Silsako, North Guwahati
2020_GMDA_16953_1
GMDA/DEV/73/2018/10
Open Tender
Civil Works
Item Rate
90 days
Guwahati
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
CEO, GMDA
₹1.9 L
Yes
8 Feb 2023
4 Mar 2020
11 Mar 2020
4 Mar 2020
11 Mar 2020
4 Mar 2020
Amount
Earth work in excavation for foundation ,trenches of wall, steps, footings, septic Tank etc. including refilling etc. as directed with (a) In ordinary soil Foundation-22X(1.20X1.20)X1.5=47.52 Cum Tie beam-63.00x0.25x0.35=5.52 Cum
Providing brick soling in foundation and under floor with best quality picked jhamah bricks, sand packed etc as directed with (a) Brick on flat soling. Floor-4x(3x3)+(3x3)=45.00 Sq.m Foundation-22x(0.9x0.9)= 17.82 Sq.m Under tie beam-63.00x0.25=15.75 Sq.m
Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, etc. as directed with in prop 1:3:6. Foundation-22x(0.90x0.90x0.10)=1.78 cum
Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work including straitening, cleaning, cutting and bending etc.
Providing and laying reinforced cement concrete works cement with course sand and 20mm downgraded stone aggregate including dewatering if necessary, curing complete. (A)In sub structure up to plinth level with Foundation, footing ,post, tie and plinth beam etc with in prop 1:2:4
(B) In super structure from plinth level up to 1st floor level. (ii) Columns, pillars, posts, struts suspended floor, roof, landing, shelf and support, balcony, lintel, beam, girder, bressumer, cantilever, staircase, (except spiral stair case and landing) including preparing the top surface and furnishing of nosing. (b) With M-20 concrete or prop. 1:1.5:3
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting, propping etc.
Foundation, footing, bases of columns etc. (i) using 38mm thick plank. In one No. footing-4x(0.25x2.0)=2.00 sq.m,for 22 nos of footing=22x2.00=44.00 sqm,
(a)(i) Columns, Pillars, Post, Strut etc. using 38mm thick. 4x(0.25x4.45)=4.45sq.m 22 nos clumn=22x4.45=97.90 sq.m,
Sides and soffits of Beams, beam launchings, cantilever, bressumer, lintel, post plate etc.(i) using 38mm thick planks. Tie beam=2x(0.20x63)=25.20 sq.m, Lintel beam=2x(0.15x63.00)=18.90 sq.m
Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, curing complete as directed in substructure up to plinth level (c )in prop.1:5 c/c length of wall=63.00x0.25x0.75=11.81 cum
Sand filling in plinth in layers not more than 150mm thick including necessary carriage , watering, ramming etc. complete as directed and specified with (c ) silt by truck carriage including loading and unloading etc. =(4x(3x3)+(3x3))x0.75=33.75cum
Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including approved damp proof admixture in prop. As directed including curing etc. completed. c/c length of wall=63.00x0.125=7.88 sq.m
112mm thick 1st class brick nogged wall in cement mortar including racking out joints, curing etc. complete as directed with (b) In cement mortar in prop. 1:4 c/c length of wall =63.0m,h=3.00 m,Qntty=(63.00x3)=189 sq.m less rolling shutter =32.60 sq.m, so net qtty=156.40 sqm
20mm thick cement plaster in two coats in plinth including arises rounded angles , not exceeding 80mm girth and finished even and smooth including curing complete as directed with in cement mortar 1:4. =2x(63.00)x0.75=94.50 Sqm
15mm thick cement plaster in single coat of brick wall, concrete walls, for interior plastering up to 1st floor level including arises , internal rounded angles and finished even and smooth including curing complete as directed with in cement mortar 1:4 =156.40x2=312.80 sqm
Providing wood work in frame (Chowkath) of doors and other similar works wrought, framed and fixed in position as directed with 1st class timber (Hollock/Sundi) etc. 4x(2x2.10+1x1.05)x(0.125x0.075)=0.20 cum for Toilet:- 2x(2x2.1+1x0.75)x(0.125x0.075)=0.09cum
Providing fitting and fixing anodized aluminum windows and ventilators of standard sections without horizontal glazing bars etc. including providing and fixing device, locking arrangement etc complete as specified and directed with 6mm clear glass. Window-5 no,B=1.8m,h=1.20m,Qtty=5x(1.8x1.20)=10.80 sq.m Ventilator- 5Nos,B=0.6m,h=0.60m,Qtty=5x(0.6x0.60) =1.80sq.m
Providing and fixing flush door shutter solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to I.S code including oxidized iron butt hinges with Decorative type face panel and block board core with 35mm thick. Door-4nos,B=1.05m,h=2.10m,Qtty=4x(1.05x2.10) = 8.82 sq.m for Toilet:- 2x0.75x2.1=3.15 sq.m
Providing Security Grill welded to casement window and clearstory wind frame with 16mm dia M.S round placed horizontally at a distance of 10cm c/c as per directed. = 12.60sqm (taken from item no 13)
Pre construction anti termite treatment by applying in the entire leveled area after plinth filling and before laying floor by applying emulsion with tricel.as directed. =(4x(3x3)+(3x3))=45 Sqm
Pre construction anti termite treatment by applying the soil along the external perimeter of the building (after construction completed) with aqueous emulsion with tricel as directed. =63 rm
Providing fitting and hoisting and fixing of roof trusses including purlins fabricated out of M.S black tubes conforming to relevant I.S code as per approved design including necessary cleats etc. For fixing ceiling joists etc. as directed. (a) TATA make Circular Hollow Section - CHS of Grade YST-310 conforming to I.S Specification :1161-1998. Wt of one truss=3.45x6.71+2.76x4.98+2.34x2x6.71+2x(1.98+1.48+0.89+0.30)x4.98+2x(2.12+1.45+.97+0.45)x4.98=23.15+13.74+31.40+46.31+49.70=164.30 kg, for 3 nos of truss=3x164.30=263.70 kg=2.64 qtl, for 5 nos of room =5x2.64=13.20 qtl,for purlin=(3.00+1.20)x20x6.71=563.64kg=5.64qtl
Steel work riveted and/ or bolted / riveted in built up sections frame work including cutting, hoisting, fixing in position and applying a priming coat of red-lead paint up to 4.6 m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed (b) In single stanchions (column) composed of R.S.J or channel with caps, bases, splices. angle brackets etc.
Providing colour coated DURASHINE/TATA BLUESCOPE ZINC-ALUMINIUM profile sheet( total coated thickness=0.45mm) of nominal 1051mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre to centre including faseners class 2 SDS, fitting and fixing complete. ( Roof trusses, purlins etc. to be measured and paid separately.) (A) DURASHINE TILE PROFILE (0.50MM(TCT)X505MM) Floor area=45.00 sq.m.+36 Sqm=81 sq.adding 30%(for slopping)=81.00x1.30=105.30 sq.m
Providing colour coated DURASHINE/TATA BLUESCOPE ZINC-ALUMINIUM, roof, wall and tile profile sheet accessories( total coated thickness=0.45mm) including faseners class 2 SDS, fitting and fixing complete. ( Roof trusses, purlins etc. to be measured and paid separately.) (iii) Crimped End Curved Ridge =(8x5)+(2x12)=64.00Rm
65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 and 15mm thick wearing layer in cement concrete in prop 1:1:2 and finished with a floating coat of neat cement finished including curing completed as directed. =L=3.00-(1x0.125)=2.875m,B=3-0.125=2.875m, so area=8.27 sq.m,for 5 nos of rom=5x8.27=41.35 Sqm
Providing fitting and fixing A.C Building board in ceiling with necessary nails, screws including 1st class local wood 50mmx 12mm beading with 4mm thick. =L=2.875m,B=2.875m, so area=8.27 sq.m,for 5 nos of rom=5x8.27=41.35 Sqm
Providing Vitrified floor tiles of approved quality of specific size, shape, and thickness not less than 18mm on floors, skirting’s, risers and trades and steps over 15mm thick base of cement mortar in prop. 1:3 including cutting where necessary with normal range of size 600mmx 600mm with Asian made. =L=2.875m,B=2.875m, so area=8.27 sq.m,for 5 nos of rom=5x8.27=41.35 Sqm,Skirting-L=63m,h=0.15m,qtty=9.45sq.m
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirting’s over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary with normal range of size 200mmx200mm with Orient made. 61.25x1.80=110.25 sq.m
Providing Bargeboard of size 200mmx 20mm with 1st class local Hollock/Bonsum timber including fitting and fixing with necessary wood screws etc complete. =5x2x(3+3)=60.00 m
Supplying fitting and fixing anodized aluminum fittings of approved make , reasonably smooth, free from sharp edges and corners , flaws and other defects including necessary aluminum screws .
(a)(i)Sliding door bolt 300mmx 16mm
(b)(i) Tower bolt 250mmx12mm
(b)(iv)Tower bolt 150mmx10mm
(c )(iii) Handle 150mm
(t) Door Stopper with rubber stopper
(h)Spring Hinge 150mm
Providing 13mm mesh hexagonal wire net made of one I.S designation (1mm dia) wire above post plate in eaves with 1st class Hollock/Bonsum/Sundi timber frame to fit exactly with the corrugation of roofing sheet including kiricide oiling two coats to timber works complete as directed. =5x((0.5x1.5x2.76)x2.00)=20.70 sq.m
Providing new wall with water proofing weather coat smooth anti fungal premium textural exterior finish after clearing and cleaning the surface etc. complete as directed. =156.40x2=312.80 sqm
Wall painting with plastic emulsion paint approved brand and manufacture (Berger Paint Highly Glossed) including cleaning dirt, dust etc. as directed. =156.40x2=312.80 sqm
PAINTING ON STEEL AND OTHER METAL SURFACE Synthetic enamel paint, aluminium paint/ bituminus paint on steel and other metal surfaces. i) Removing old paint from stel and other metal surface and making the surface even (b) wall paint remover =71x3.00=213 Sqm
Jungle clearance including uprooting of vegetation,grass,brush wood,sapling and trees not exceeding 300mm grith and dispolsal of same outside the periphery and lift upto 1500 mm
Demolising CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels For road=835.79 Sqmx0.35=292.53 sq.m
Dismantling all types of corrugated /trapezoidal sheet roofing including ,ridges,hips,valleys and gutters etc. and stacking the materials as directed by the deptt. For all levels assam type house=floor area=24.49 sq.m.adding 30%(for slopping)=24.59x1.30=31.97 sq.m
Demolising the plastering from walls/R.C.C and P.C.C members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels For Boundary wall=585.67x2.78x0.015=24.43Cum
Dismantling steel work in built up section in joists, angles,channels,tees flats etc. including all gusset plates,bolts,nuts,cutting rives ………………………………………………………………………………………………………………etc.
Construction of Granular sub base by providing close graded material ,spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place and compacting with vibratory roller to achieve the desired density using grading iii materials =2x(2.1x166.08)=2x348.77=697.54 Sqm =1x5.5x16.50=90.75 Sqm =1x5.00x9.50=47.50 Sqm
Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80 mm and 28 days compressive strength not less than 30N/M ……………………………………………………………………………………………………………………………………………………............................. as per drawing and technical specification clause 1504 of MORD =2x(2.1x166.08)=2x348.77=697.54 Sqm =1x5.5x16.50=90.75 Sqm =1x5.00x9.50=47.50 Sqm
Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, wall, brick work etc. as directed and specified including curing with in prop. 1:3:6 =2x(0.75x166.08)x0.15=2x348.77=37.37 Sqm =1x0.75x16.50x0.15=1.86 Sqm =1x0.75x9.50x0.15=1.10 Sqm
Supplying and planting of ornamental trees 300mm height including pit making (60cmx 60cm x 60cm ) ,filling the pit with appropriate soil media , manure and fertilizers as per specifications and necessary maintenance for a period for one year from the date of planting complete as specified and directed (A) with Neem/Mahaneem/Bakul/Korobi/Thuja.
Providing drain with cement mortar (1:3:6) 10 cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of neat cement finish as directed with 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. =585.67m
112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed and specified with in prop. 1:5,213.00x1.80=383.40
15mm thick cement plaster on wall and finished even and smooth including curing completed as directed and specified with in cement mortar 1:3.,=585.67x(2.10)=1229.91 sqm
Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand Asian paints and of required shade after cleaning and clearing the surface etc. completed as directed.=585.67x(2.10)=1229.91 sqm
Providing,fitting and fixing M.S grill of required pattern for M.S flat at required spacing in frame all around ………………………………………….round headed bolts and nuts or screws
Supplying,fitting and fixing barbed wire fencing with seven strands of brbed wire 12 S.W.GX 2 Piles x4 points at 75 mm appart including supplying fitting and fixing sawn sal wood post of 100 mm x100 mm ………two coats in posts and struts and supplying necessary nails, staples etc.
Supplying fitting and fixing double leaf heavy duty iron gate , frame made of 40mmx40mm x6mm M.S angle/ Round pipe etc. completed as per design and directed by the department as per specification for main gate and side gate etc. Use-10mm thk M.S.plate=78.50 kg/sqm size of gate-2x6.00x2.10=25.20 sqm, x78.50 kg=1978.20kg=19.78qtl
Supplying with fitting & fixing 60mm dia 3660mm height 4-in-one combination four arm integrated with acrylic diffusers, translucent top,bottom clear, black powder painted finish tubuler pole.The pole is swaged at the top to accomodate double arm bracket assembly, secred on to the top by means of 2 annular rings with Allen grub screws. The luminaries is designed for and integral with 4 nos 36 w CFL lamp suitable for operation on 240 V 50 Hz single phase AC supply. The pole is to be fitted on 1:3:6 PCC pole foundation of size 300x300mmx1200mm with grouting nuts & bolts as specified & directed by the deppt. (Metal coats make) KALINGA-4 model or equivalent.
Providing fitting and fixing white vitreous china pedestal type water closet ( European type W.C pan P trap) of size 525x 340x 405 0f SONA etc. as directed with white colour . =2
Providing fitting and fixing 63mm dia PVC cowel of ISI make complete as directed and specified. =3
Supplying fitting and fixing 87.5 degree pvc bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels with 110mm dia. =23
Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing necessary complete with 160mm dia =26
Supplying fitting and fixing PVC pipes of 6 kg/sq cm (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps, screws etc. as necessary complete at all levels with 110mm dia. =34
Providing vitreous china flat back wash basin of size 450mmx 300mm of Parry ware make with CI/MS brackets, 32mm CP brass waste coupling etc. white vitreous china flat back wash basin of size 450mmx 300mm. =6
Providing fitting and fixing glass self with C.P guard rail of Agmeco make to wall complete with 25mm dia long screw, all plug etc. complete with a size of 600mmx 125mm. =7
Providing fitting and fixing chrome plated (CP) towel rail of jaquar make complete as specified and directed with (a) Continental Accessories (600mm long) =4
Supplying fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels with 160mm dia. =3
Supplying fitting and fixing man hole cover including fitting and fixing etc. completed as directed =5
Supplying fitting and fixing PVC automatic flushing cistern of 10 liter capacity of Parry ware /Hind ware with all internal fittings with CI brackets including fitting and fixing cp flush pipe, union clamps etc. as directed and specified with (a) White. =3
Supplying fitting and fixing overhead adjustable chrome plated (CP) spray shower 15mm dia of Sona make with wall flange as directed and specified with Supreme shower with arm. =4
Supplying fitting and fixing Telephonic Chrome plated shower (CP) of approved brand as directed and specified with Essco make =3
Construction of Inspection pit inside measurement 450mmx450mmx450mm flush with 100mm diameter PVC pipes and cement concrete base in prop. 1:3:6 over brick flat soling etc. as directed and specified. =7
Construction of filter bed in soak pit including earth work in excavation of soil and then fill-in up of the trench with brick nuts /Charcoal covered with earth over a layer of A.C plain sheet above brick bat filling complete as directed. =7.03x1.20x1.20=10.12 cum
Supplying fitting and fixing G.I pipes of following sizes , with all necessary “R” brand or similar approved G.I fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting ,H.W clamp etc. complete at all levels including below G.L as directed and specified
((b)(i)40mm dia Tata( medium) =100.00
(c )(i)32mm dia using Tata(medium) =75.00
(d)(i) 25mm dia using Tata(medium) =40.00
(f)15mm dia using Tata (medium) =30.00
Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified with Essco make (a) Bib cock short body. =11
Supplying fitting and fixing chrome plated (CP) stop cock of approved brand and size as directed and specified with 15mm dia. =7
Providing fitting and fixing white vitreous china flat back type lipped front urinal basin of 455x360x267mm of Parry ware/Cera make including all necessary fitting fixing as directed and specified with white colour. =5
Providing fitting and fixing white vitreous china squatting plate of SONA make including fitting fixing as directed and specified. With white colour. =4
Various miscellaneous item which is not mentioned in the SOR such as playing tools, boating tools and etc.(Are taken lumsum amt.)
Mintu Das
BIPUL MEDHI
Ganesh Seal
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_25770.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .