ICU/HDU of Additional Blok in Civil Hospital at Rewari in Rewari Distt.

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (HSR 8.18) (b) Window

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick including concrete base (HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement concrete 1 :1/2 :3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.81+ 10.95 (a) First Storey

11.43 cm thick brick wall with every fourth course, reinforced with hoop-iron, laid in 1:4 cement sand mortar in super-structure. (HSR 11.46)

12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

Providing & fixing vitrified tiles of size 600 x 600mm of approved made in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, & RAK. (HSR 14.89) (Note: double charged tiles shall be used)

Providing and fixing ceramic-tiles / anti-skid tiles of size 400x400mm or above size of approved make in floors laid in any pattern over base of 20 mm thick Cement Sand Mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles. [HSR 14.91] Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK.SOMANI, ORIENT & JOHNSONS

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. [HSR 14.92 b] size 300 mmx 450 mm

Supply, installation, Fixing of seamless static conducting floor, 2 mm thickness with covering all joints welded, make Gerfloor / Terket (NS)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (DSR 26.26 (ii))

Providing and Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asain & Shalimar shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge.[HSR 16.25] Through Rate

Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre-board etc. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asain & Shalimar shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge (HSR 16.27)Through Rate

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR 21.18)

Providing and fixing Aluminum work for doors, windows, ventilators and partitions wit extruded built up standard tubular sections / appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS: 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling CP brass / stainless steel screws all complete. Fixed portion (Anodized Aluminum transparent or dyed to required shade according shade according to IS: 1868 minimum anodic coating of grade AD 15) (HSR 17.95).

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/ stainless steel scres etc. complete. (HSR 17.97 (a)) Pre-laminated particle board with decorative lamination on one side & balancing lamination on both side.

Providing and fixing glazing in aluminum door, windows, ventilators shutter and partitions etc. with pvc/neoprene gasket etc complete ( cost of aluminimum snap beading shall be paid in the basis items. (HSR 17.98 (b)) With float glass panes of 5.0mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box (a) With Stainless Steel cover plate. [HSR 17.99 (a)]

Providing and fixing of casement and fixed windows made from multi chambered UPVC profiles of 56 to 68mm width in natural from stabilized for heat, light impact & UV radiation. The UPVC profiles should be reinforced with galvanized steel profiles of designed thickness. All openable sashes shall be having weather seal fitted in continuous length made from Bubble EPDM Rubber and side hung / top hung with upto 90 degree opening friction stays of SS 304 with provision of multipoint locking system made from Espag rods. All handle shall be made from Die Cat Zinc alloy (ModelESPAG ) BS -1004 in white finish with suitable locking arrangement. The window shall be fixed to opening using expandable screws and friction stays that shall be able to with stand wind speeds upto 180 Km/ hr. the shoot bolts in windows shall be rust proof metallic coated steel. The window frame shall be fixed in masonry wall RCC with necessary fasterers, nuts, bolts, washer, caps, silicon sealant etc. complete (HSR 17.103) Opening frame work

(b) Openable shutter

Filling of all joints and vacaties & Antibacterial paint anti fungal paint, self sterlizing, wall coating system of 300 micron. Make Steridex (Sikka Paint Liquid Plastic) (NS)

Dorma Patch Door set for 12mm plain toughened glass door consisting of Dorma top pivot / Dorma Top Patch / Dorma Bottom Patch / Dorma Coner Lock / Overpanel fitting / WCP for overpanel Glass + Strike plate & EPC / Dorma Floor spring BTS 75 with Pull handle of size 450mm x 25mm long in SS 304 grade & Half dome stopper including 12 mm plain toughened glass and installation charges. (NS)

Providing & fixing of 16 mm thick multi cell vertical standing seam (both sides) polycarbonate panels system of approved make and manufacturer in approved colour and shade with snao on connector to inter lock the panel along with aluminimum glazing bar over ISI marked MS suppoorting structure complete as per manufacturere specifications and direction of EIC. Steel structure shall be provided with red oxide primer and enamel painting of approved colour and shade. (NS)

Supplying, installation and fixing of magnatic writing list board of size 950x650 mm make MG. (NS)

Steel reinforcement TMT bars FE-500 EQR/ FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc and placing in position complete in all respect for all heights/ depths / storeys / basements etc. (Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement). (HSR 18.22)

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (DSR 16.86.1) With granite stone of area less than 0.50 sqm

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- One Piece SEAT AND LIDIN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers,(to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (a) Single trap syphonic W.C. Suite (i) White [HSR 30.5 (i) (a)]

EXTRA OVER item nos.30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow black or white plastic seat and lid (i) White plastic seat (Solid) [HSR 30.13 (i)]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 750mm x 25 MM DIA C.P.BRASS ADJUSTABLE (HSR 30.68 (a))

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc (a) C.P.BRASS (i) Soap dish large (HSR 30.70 (a) (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (e) C.P. brass towel ring (HSR 30.68 (e))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) INDIAN MAKE (i) 600mm X 450mm (HSR 30.71 (a) (i))

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) (a) One way (HSR 30.78 a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LARGE FLAT BACK OR Angular lipped front Urinal 610MM High consisting of . (i) Flat back lipped or angular urinal basin or VITEROUS CHINAWARE ; (to the approval of the Engineer-in-charge) (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I. AUTOMATIC flushing CISTERN painted with non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside with screwed 15mm pipe : (iii) PAIR OF R.S.OR C.I.PAINTED BRACKETS AND BRASS CCOUPLINGS :- (iv) Pair of C.I. SPECIAL TYPE BRACKETS for urinal : (v) 32 MM C.P.BRASS WASTE WITH DOME GRATING; (vi) 32 MM C.P.BRASS SPREADER : COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOOR AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge). Single Urinal (i) White (HSR 30.25 (i))

Providing and fixing in position best Indian make Lavatory Suites (with full anti -splash rim in viterous chinaware & all other necessary fitting as fully described in item No. 30.41 above, White, 610mm x 510mm with one No. tap (HSR 30.42 (iii)

Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) (White) (HSR 30.44 (i))

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks completein all respects to the satisfaction of Engineer-In-Charge. (Except civil work).(HSR 30.119) 1000 ltr. capacity

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STELL SINKS WITH COMPLETE FITTINGS. AS FULLY DESCRIBED IN ITEM NO.30.51 ABOVE. a) 600mm X 450mm X 200mm [HSR 30.53 (a)]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge . (DSR 18.7.2) 20 mm nominal outer dia Pipes

Recovery items: The rates quoted against recovery items will not be included in the total amount rather is will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer and granular layer have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specification) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under:- Old window @ 500 Each Note: - All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price. Note:- In case of any difference in the unit & nomenclature of any of the HSR/ DSR items of Civil, P.H. work depicted in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make/ brand exhibited in HSR / DSR and exhibited in approved standard deocument) as approved by Engineer-in-charge, while executing various items / works at site.

Sh. Somesh Contractor

Deepay Yadav Engineers and Contractor

AMAN ATTRI

Mukesh Raj Contractor

Pawan