Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.1 LAccepted-AOC 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹48.4 L+₹77,565.40 (1.63%)Rejected-Finance VILL JETHIA NATUN PARA PO JETHIA HALISAHAR PIN 743135 | 24 PARAGANAS NORTH | WEST BENGAL | 743135 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹49.8 L+₹2.2 L (4.66%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
20 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR /MAINT AND MISC B/R WORKS IN OFFRS MD ACCN AT JSA BLOCK -01 OF AGE B/R -II UNDER GE(FW) KOLKATA
2022_MES_553546_1
8900/FW/E8
Open Tender
Civil Works
Item Rate
240 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW)Kolkata
₹88,000
12 Nov 2022
22 Sept 2022
21 Oct 2022
22 Sept 2022
20 Oct 2022
6 Oct 2022
Amount
SCHEDULE 'A' PART-I (B/R WORKS): M&L for applying one coat of acrylic distemper to old decorated surfaces of walls, finished with rollers including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed.
M&L for applying one coat of acrylic distemper to old decorated surfaces of ceiling, finished with rollers including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed.
M&L for complete removal of existing treatment of wall and applying two coat of acrylic distemper, finished with rollers over a coat of alkali resistant primer applied on & including layer of 1 mm thick putty for neat and smooth finishing complete all as specified and directed.
M&L for applying one coat of white wash to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed.
M&L for applying one coat of white wash to old decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed.
M&L for applying one coat of synthetic enamel paint on old treated steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed.
M&L for applying one or more coat of french polish on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed.
M&L for complete removal of existing treatment of wall and applying two coat of acrylic emulsion/ plastic emulsion paint, finished with rollers over a coat of alkali resistant primer applied on & including layer of 1 mm thick putty for neat and smooth finishing complete all as specified and directed.
M&L Preparation of old surfaces of wall and applying 1mm thick plaster of paris complete all as specified and as directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
-ditto- as per Item No. 14 above but for bldg height from 5 to 8 storey height
-ditto- as per Item No. 14 above but for bldg height from 9 to 12 storey height
Taking down chowkats or frame with shutter (without taking off shutters from the frame) area exceeding 1.5SQM and not exceeding 4SQM complete all as specified and as directed.
Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exc 1.50 SQM each incl removing to store complete all as specified and as directed.
Taking down shutters of any description area exceeding 1.00 SQM and not exceeding 2.00 SQM each and removing from the site complete all as specified and directed.
M&L 2nd class HW plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints complete all as specified and as directed.
M&L 30 mm thick flush shutters solid core construction with black board core and plywood face panels commercial type on both side complete all as specified and as directed.
M&L 35 mm thick factory made 2nd class hard wood glazed & skeleton shutters open rebated and prepared to received glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I, Sec 8, Clause 8.20 complete all as specified and as directed.
S&F PVC solid door frame of size 50 x 47 mm made out of 5 mm thick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F 30 mm thick factory made both side prelaminated solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm X 19mm for stiles, top and bottom rails, treated with a coat of metal primer, MS frame covered with heat moulded prelaminated PVC 'C' channel for stiles and both side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
S&F anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples all as specified and directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including rakingout joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
Dismantling of boarding of any type, size and at any places complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description), from metal frames incl punching or drilling out old glazing pins/spring clips and providing & fixing new ones all as specified and directed.
S&F 18-19 mm thick commercial type face plywood BWR grade type BB fixed with screws/nails to timber frame work complete all as specified and directed.
M&L Preparation of new wooden surfaces and applying two coat of synthetic enemal paint over a coat of wood primer complete all as specified and directed.
S&F steel window with side hung shutter including necessary hinges with steel handle and steel peg stay complete with glazing bars devotailed or welded all as directed. (NOTE: Sheet glass will be measured and paid seperately)
S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle-01No each shutter etc as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)
S&F 4 mm thick plain tinted/frosted sheet glass for Aluminium window/ventilator complete all as specified and as directed.
S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50SQM in each panes all as specified and directed. (Note : Height of building is approx 30 metres. Contractor's quoted rate is deemed to be inclusive of the above factor)
S&F 100mm long mild steel butt hinges medium weight cold rolled fixed all as specified and directed.
S&F in repair 100mm long mild steel butt hinges medium weight cold rolled fixed all as specified and directed.
S&F 75mm long mild steel butt hinges medium weight cold rolled fixed all as specified and directed.
S&F in repair 75mm long mild steel butt hinges medium weight cold rolled fixed all as specified and directed.
S&F 200mm long size (ISI marked) aluminium anodised barrel tower bolt of extruded section all as specified and directed.
S&F in repair 200mm long size (ISI marked) aluminium anodised barrel tower bolt of extruded section all as specified and directed.
S&F 150mm long size (ISI marked) aluminium anodised barrel tower bolt of extruded section all as specified and directed.
S&F in repair 150mm long size (ISI marked) aluminium anodised barrel tower bolt of extruded section all as specified and directed.
S&F 150mm size (ISI marked) extruded aluminium alloy handles (fabricated type) anodised all as specified and directed.
S&F in repair 150mm size (ISI markded) extruded aluminium alloy handles(fabricated type) anodised all as specified and directed.
S&F 100mm size (ISI markded) extruded aluminium alloy handles (fabricated type) anodised all as specified and directed.
S&F in repair 100mm size (ISI markded) extruded aluminium alloy handles (fabricated type) anodised all as specified and directed.
S&F 300mm long aluminium alloy, anodising sliding door bolt, with hasp and staple (bolt type) fixed clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
S&F in repair 300mm long aluminium alloy, anodising sliding door bolt, with hasp and staple (bolt type) fixed clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering on ceiling surfaces in cement mortar 1:3 , finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed
M&L for rendering 20mm thick built in cement mortar (1:4) in two layers (10mm thick each layer) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer's instruction for bldg height upto 4 storey incl scaffolding complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).
-ditto- as per Item No. 53 above but for bldg height from 5 to 8 storey height
-ditto- as per Item No. 53 above but for bldg height from 9 to 12 storey height
Supply only liquid water proofing compound all as specified and as directed.
M&L Preparation of new plastered surfaces of wall and applying two coat of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L Preparation of new plastered surfaces of ceilings and applying two coat of acrylic distemper, finished with rolers over a coat of alkali resistant primer complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
-ditto- as per Item No. 61 above but for bldg height from 5 to 8 storey height
-ditto- as per Item No. 61 but for bldg height from 9 to 12 storey height
S&F in repair 15mm bore galvanised iron pipe with all fittings, fixed to wall/ceiling or laid in floors complete all as specified and directed.
S&F in repair 20mm bore galvanised iron pipe with all fittings, fixed to wall/ceiling or lain in floors complete all as specified and directed.
S&F in repair 25mm bore galvanised iron pipe with all fittings, fixed to wall/ceiling or lain in floors complete all as specified and directed.
S&F 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed by Engineer-in-Charge. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON / CERA)
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39037/ CERA, Cat No: F1005151 / ASIAN PAINTS, Cat No: MYBC101 / PRAYAG, Cat No: 8108 / HINDWARE, Cat No: F390003 / PARRYWARE, Cat No: G1434A1)
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium range), fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: CON-041KN / CERA, Cat No: F1005161 / ASIAN PAINTS, Cat No: MYBC102 / PRAYAG, Cat No: 8111 / HINDWARE, Cat No: F390004 / PARRYWARE, Cat No: G1434A1)
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESSCO, Cat No : ALE-ESS-583/ JAQUAR, Cat No: PRS-031/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / HINDWARE, Cat No: F160013 / PARRYWARE, Cat No: E8352A1)
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F390005 / PRAYAG, Cat No: 9010)
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 /CERA, Model: OCEAN / PRAYAG, Cat No: 9218/ HINDWARE, Cat No: F330052)
S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : JAQUAR, Cat No: ARI-39001B / CERA, Cat No : F1005451 / ASIAN PAINT, Cat No: MYBM101 / HINDWARE, Cat No: F360011/ PRAYAG, Cat No: 8151 /PARRYWARE, Cat No: T3814A1)
S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC seat cover and connecting fittings complete all as specified and directed. (Make :CERA, Model : CALIBRE / ASIAN PAINTS, Model: PRIMUS / JAQUAR, Model: CONTINENTAL / HINDWARE, Model: ALPHA S 220 / PARRYWARE, Model: INDUS)
S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE )
S&F in repair vitreous china, wall mounted closet, white incl bracket, trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model : COMPACT / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: STUDIO)
S&F in repair flush valve concealed push type (dual flush) 40 mm bore including concealed body and all other fittings complete all as specified and as directed. (Make: CERA, Cat No: F8010202 / HINDWARE, cat No: F860042 / PARRYWARE, Cat No: T3305A1 / PRAYAG, Cat No: BEA-37 / JAQUAR, Cat No: FLV-1089N)
S&F in repair floor mounted vitreous china, white, wash down water closet pan (pedestal pattern) with "P" or "S" trap, front or back inlet fixing bolts with and including 10 litre capacity syphonic action type low level PVC flushing cistern matching with water closet colour with inlet ball valve float handle fixed with cast iron bracket of suitable size) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cove (white) fixed with mild steel chromium plated or aluminium hinging device, in proper position including making all necessary connections with flushing cistern, flush pipe, anti syphonage pipe etc complete all as specified and directed. (Make of EWC : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK / ASIAN PAINTS, Model: TREND) (Make of Cistern : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model: Corona /ASIAN PAINTS, Model: TREND)
S&F Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ASIAN PAINTS, Model: SIRIUS) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in cement mortar 1:4 all as specified and as directed.
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL/ASIAN PAINTS, Model: TREND)
Dismantling floor hearth or wall tiling of any description of any thickness incl cement mortar bedding etc all as specified and directed.
S&F non-skid ceramic coloured tiles (square / rectangular), 7 to 8 mm thick, area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
S&F non-skid ceramic coloured tiles (square/rectangular), 7 to 8 mm thick, area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:4 complete all as specified and directed.
S&F glazed coloured ceramic tiles in vertical surface, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
S&F glazed coloured ceramic tiles in vertical surface 300 X 200 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
S&F in repairs towel rack (premium range) with lower hangar with hook complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12/HINDWARE, Cat No: F890012)
S&F in repairs toilet paper holder, surface type with flap complete all as specified and directed. (Make : JAQUAR, Cat No : ACN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-08 / HINDWARE, Cat No: F880003 / PARRYWARE, Cat No: T6514A1)
S&F in repairs soap dish, chromium plated body complete all as specified and directed. (Make: PRAYAG, Cat No: BA-45 / CERA, Cat No: F5003106 / PARRYWARE, Cat No: T6902A1 / HINDWARE, Cat No: F880011)
S&F in repair 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / PRAYAG, Cat No: BA-35 / CERA, Cat No: F5001106 / HINDWARE, Cat No: F890005)
S&F in repairs stainless steel round grating 127mm dia complete all as specified and directed. (Make : PRAYAG, Cat No: FT-64 or equivalent make as approved by GE)
S&F in repair sheet glass shelf assembly consisting of sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. (MAKE: HINDWARE, Cat No: F880010 / JAQUAR, Cat No: ACN-1171N / PARRYWARE, Cat No: T6009A1 / PRAYAG, Cat No: BEA-51 / CERA, Cat No: F5001114)
S&F in repair corner glass shelf 200 mm with brass brackets complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)
S&F in repairs Acrylic corner shelf (Set of 3) with railing complete all as directed.
S&F in repairs Acrylic corner shelf of size 300 mm complete all as directed.
S&F in repair Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer including taking down existing rack complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29273UPR / PARRYWARE, Cat No: G4816A1 / CERA, Cat No: F1003401 / ASIAN PAINTS, Cat No: ALWM103 / PRAYAG, Cat No: 9375-N / HINDWARE, Cat No: F390020)
S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29281/ PARRYWARE, Cat No: G4817A1 / CERA, Cat No: F1003403 / ASIAN PAINTS, Cat No: ALWM104 / PRAYAG, Cat No: 9380-N / HINDWARE, Cat No: F390022) NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : JAQUAR, Cat No: HSH-1939 /CERA, Cat No: F7030103AB / ASIAN PAINTS, Cat No: HS-104 / HINDWARE, Cat No: F160050 / PRAYAG, Cat No: BHS-90 /PARRYWARE, Cat No: T9819A1 )
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )
S&F in repair 15mm bore chromium plated sink cock swivel casted spout (wall mounted model) as directed by Engineer-in-charge (Make : JAQUAR, Cat No: CON-357KN / PARRYWARE, Cat No: G1421A1 / PRAYAG, Cat No: 8516 / HINDWARE, Cat No: F330024SCP)
S&F in repair chromium plated tumbler holder with glass tumbler & wall flange complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1141N / PRAYAG, Cat No: BA-26G /HINDWARE, Cat No: F890007 / CERA, Cat No: F5002107 / PARRRYWARE, Cat No: T6004A1)
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ HINDWARE, Cat No: F160051)
M&L for 0.9mm thick decorative laminate type-1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F Bands, straps, supports or stays for rainwater, ventilating, pipes, including bolts, if required hooks(stays) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar small articles conforming to fe-290 Gde E-165 complete all as specified and directed.
Dismantling of structual steel iron or mild steel work Including doors, gates etc & simillar work complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Demolition of cement concrete is ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
S&F in repair Fibre glass reinforced/polycarbonate transluent corrugated sheeting with two corrugation side laps fixed with 'L' or 'J' type hooks complete all as specified and directed.
M&L Cutting holes into or through brick walls built in cement mortar in 1:3 or cement concrete 1:2:4 type B1 as required in superficial area exceeding 150Sqcm but not exceeding 400 Sqcm all as specified and directed.
S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. with in 20mm of the length indicated) Fe-290 (Gde E- 165) etc all as specified and directed.
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-B complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
S&F in repair 110 mm bore PVC (SWR) pipes, type 'B', single socketed in any length with rubber ring joints fixed to walls with clamps for bldg height upto 4 storey incl necessary scaffolding complete all as specified and directed.
-ditto- as per Item No. 117 above but for bldg height from 5 to 8 storey height
-ditto- as per Item No. 117 above but for bldg height from 9 to 12 storey height
S&F in repair PVC (SWR) pipes of type-A for use in ventilation pipe work and rain water application, single socket, 110 mm bore in any length including rubber ring joints and fixed to wall with clips, other standard material as specified in IS 13592, for bldg height upto 4 storey incl necessary scaffolding complete all as specififed and directed.
-ditto- as per Item No. 120 above but for bldg height from 5 to 8 storey height
-ditto- as per Item No. 120 above but for bldg height from 9 to 12 storey height
S&F in repair PVC (SWR) bends for 110 dia pipe for any building height complete all as specified and directed.
S&F in repair PVC (SWR) Junction single T for 110 dia pipe for any building height complete all as specified and directed.
S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and directed.
S&F 75mm length hasp and staple aluminium anodised, wire type, stove enemalled balck, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 20mm dia fancy type chrominum plated dapery rod incl heavy duty decorative bracket and all fittings fixed on wall sample as approved by Engr-in-charge complete all as directed. (NOTE: Quoted rate shall be deemed to include the cost of brackets)
S&F in repair 2 lever brass lock, cupboard grade 1, 50mm size all complete all as specified and directed.
S&F in repair 6 lever brass type Mortice lock vertical type size 100mm complete all as specified and directed.
S&F in repair coloured (any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed.
-ditto- as per Item No. 131 above but white seat cover for EWC
S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8292 / PRAYAG, Cat No: 725 or equivalent model in JAQUAR / CERA / HINDWARE)
Supply, hoisting and fixing in repairs rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
-ditto- as per Item No. 134 above but 1000 ltr capacity
S&F in repair 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)
All as per Item No. 136 here-in-before but 25 mm bore Ball brass valves. (MAKE : PRAYAG, Cat No. B-153 or equivalent model in JEXON / POLYTUF / SHAKTI)
M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement complete all as specified and directed.
S&F in repairs Cast iron soil, waste and vent pipe, (sand cast) 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including necessary scaffolding (upto 4 th storey) complete all as specified and directed.
S&F in repairs Cast iron soil, waste and vent pipe, (sand cast pipe) 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including necessary scaffolding (5 th storey to 8 th storey) complete all as specified and directed.
S&F in repairs Cast iron soil, waste and vent pipe, (sand pipe) 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including necessary scaffolding (9 storey to 12 storey) complete all as specified and directed.
S&F in repair CI (spun) Bends (any radius) for any building height complete all as specified and directed.
S&F in repair CI spun Cowl for 100 mm bore pipe for any building height complete all as specified and directed.
S&F in repair CI (spun) Branch pieces, singel (any radiousequal or unequal) for 100 mm bore pipe for any building height complete all as specified and directed
S&F in repair Chromium plated brass Towel ring (premium range) complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 / CERA, Cat No: F5002105 / HINDWARE, Cat No: F880007)
S&F in repair CP bottle trap (premium range) with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / HINDWARE, Cat No: F850003/CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26 / PARRYWARE, Cat No; T3202A1)
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / CERA, Model: OCEAN)
S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout, sink mounted type, screwed for iron pipe etc complete all as directed (MAKE :PARRYWARE, Cat No : G4803A1 / CERA, Cat No: F1003104 / PRAYAG, Cat No : 9014/ HINDWARE, Cat No: F280012 / JAQUAR, Cat No: SOL-6357)
M&L for taking down plants/vegetaion from wall upto roof level by means of cutting holes into brick wall and making good the surfaces of dismantling portion n.exc 150Sqcm superficial area and n.exc on brick deep by PCC 1:3:6 type C1 (using 20 mm graded stone aggregates) and plastering in cement mortar (1:4) of disturb portion and applying two coats of cement based paint over a coat of primer to match the existing surfaces height upto 4th floor incl necessary scaffolding etc complete all as specified and directed.
-ditto- all as per item No 150 but for height 5th to 8th floor.
-ditto- all as per item No 150 but for height exc 8th floor.
M&L for repair to steel window including welding, binding of steel section, repair to hinges, fixing of stay and handles etc n.exc 1.5 SQM for any building height incl necessary T&P, scaffolding etc complete all as specified and directed.
-ditto- as per Item no. 153 above but area exc 1.5SQM but n.exc 4.00SQM
M&L for cleaning of inaccesible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required, applying tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 3% by weight of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)
M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 SQM) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 3% by weight of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding for upto 4th storey building height complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)
-ditto- all as per item No 156 but for height 5th to 8th floor.
-ditto- all as per item No 156 but for height exc 8th floor.
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 SQM but n. exc 0.5 SQM each complete all as specified and directed.
-ditto- as per Item No. 159 above but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 SQM each
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
M&L for brushing cement slurry @ 2.75 Kg/SQM over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .
M&L for Providing Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding, of thickness as required on site, finished even and fair complete all as directed by Engineer - in - Charge .
M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per SQM. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/SQM, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per SQM over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces incl necessary scaffolding complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate all as specified and directed.
S&F in repair PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.
S&F in repair 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101 /PARRYWARE, Cat No: T9911A1 / HINDWARE, Cat No: F850002)
S&F in repair strainer for kitchen sinks, round, complete all as specified and directed. (Make: PRAYAG, Cat No: SA-03 or equivalent item as approved by GE)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as spproved by GE)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as approved by GE)
S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / CERA, Cat No: F8050101 / PARRYWARE, Cat No: T9910A1 /JAQUAR. Cat No: ALD-705/ HINDWARE, Cat No: F850023)
M&L for providing and injecting chemical emulsion for post construction anti - termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.
M&L for providing and injecting chemical emulsion for post construction anti - termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litres per hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.
M&L for mechanised cleaning and de-germination of inner surfaces of RCC/PVC water storage tanks, of capacity not exc 500 litres of any description and in any position comprising of seven stage cleaning & sterilisation of water tanks as specified here-in-after :- (a) 1st Stage :- to drain out water by using exit valve or high capacity dewatering system as approved by Engineer-in-Charge. (b)2nd Stage:- Cleaning of all algae formation inside the tank using approved chemical and scrubbing the walls of the tank. (c) 3rd Stage :- Cleaning of internal surfaces of tanks using fresh water by high speed jet pump with pressure 5 PSI. (d) 4th Stage:- Bacterial screening and sterilisation using approved compound. (e) 5th Stage:- Cleaning the floor of water tank by industrial vacuum cleaner. (f) 6th Stage:- Bacterial screening and sterilisation using ultra violet ray injector covering 360 degrees within the tank to kill all bacteria. (g) 7th Stage:- Bacterial screening and sterilisation of the tank floors using approved oxidising agents.
-ditto- all as per item No 177 but for tanks of capacity exceeding 500 litres but not exceeding 1000 litres
-ditto- all as per item No 177 but for tanks of capacity exceeding 1000 litres but not exceeding 2000 litres
-ditto- all as per item No 177 but for tanks of capacity exceeding 2000 litres but not exceeding 5000 litres
SCHEDULE 'A' PART-II (E/M WORKS) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.
All as per item No. 182 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring with terminal box).
All as per item No. 182 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).
All as per item No. 182 above but using 2.5 SQMm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 SQMm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No. 186 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 186 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 186 above but using 2.5 SQMm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 SQMm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).
M&L for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping complete with all fittings and accessories, (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately.
All as per item No. 190 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring without terminal box).
All as per item No. 190 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring without terminal box).
All as per item No 190 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent (surface type point wiring without terminal box).
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No 194 here-in-before but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 194 here-in-before but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 194 above but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in existing PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTE: Wiring shall be done in existing conduit. Quoted rate shall be excusive of the cost of conduit)
All as per item No. 198 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).
All as per item No. 198 above but using 2.5 SQMm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 SQMm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box in existing conduit).
S&F switch piano flush button AC 230 V Single pole 5/6 Amp one way complete all as specified and directed.
S&F Bell push, flush type, 5/6 Amps, 240 volts complete all as specified and directed.
S&F socket outlet, non-shuttered, 2-in-1, 3 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type universal complete with all necessary electrical connection all as specified and directed.
S&F new Call bell, musical type, AC 230/240 Volts, single pole complete all as specified and directed.
S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type, 100 watts, 5 Speed Control, 230/240 Volts complete all as specified and directed.
S&F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
S&F Modular Switch 1 way, 16 Amps, 1 module complete all as specified and directed.
S&F Modular Socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S&F Modular Socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S&F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S&F Modular Bell push 6 Amps, 1 module complete all as specified and directed.
S&F 25 Amps motor starter switch, modular type complete all as specified and directed.
S&F Modular White cover plate with frame 1 module complete all as specified and directed.
S&F Modular White cover plate with frame 2 module complete all as specified and directed.
S&F Modular White cover plate with frame 3 module complete all as specified and directed.
S&F Modular White cover plate with frame 4 module complete all as specified and directed.
S&F Modular White cover plate with frame 6 module complete all as specified and directed.
S&F Modular White cover plate with frame 8 module complete all as specified and directed.
S&F Modular White cover plate with frame 12 module complete all as specified and directed.
S&F Modular type Metal Flush box 1/2 module complete all as specified and directed.
S&F Modular type Metal Flush box 3 module complete all as specified and directed.
S&F Modular type Metal Flush box 4 module complete all as specified and directed.
S&F Modular type Metal Flush box 6 module complete all as specified and directed.
S&F Modular type Metal Flush box 8 module complete all as specified and directed.
S&F Modular type Metal Flush box 12 module complete all as specified and directed.
S&F in repair Modular fittings/accessories in existing location complete all as specified & directed for the following types :-. (Note: Make of fitting shall be as per existing one)
Modular Switch 1 way 6 A, 1 module, 240 Volts AC
Modular Switch 1 way 16 A, 1 module 240 Volts AC
Modular Socket 6 A, 2/3 pin combined 2 module, shuttered, 240 Volts AC
Modular Socket 6 / 16 A, 2/3 pin combined 2 module, shuttered, 240 Volts AC
Modular Fan step regulator, 120 watt, 2 module, 100W, 4 step, 240 Volts AC
Modular type Metal Flush box 3 module
Modular type Metal Flush box 6 module
Modular type Metal Flush box 8 module
Modular White cover plate with frame 3 module
Modular White cover plate with frame 6 module
Modular White cover plate with frame 8 module
S&F in repair electrical fittings/accessories in existing location complete all as specified & directed for the following types :-. (Note: Make of fitting shall be as per existing one)
Switch piano flush button AC 230 V Single pole 5/6 Amp one way
Bell push, flush type, 5/6 Amps, 240 volts
Socket outlet, non-shuttered, 2-in-1, 3 pin, 6 Amp AC 230 Volts flush type
Switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type
Switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type
Call bell, musical type, AC 230/240 Volts, single pole
Stepped type electronic fan regulator, flush type, 100 watts, 5 Speed Control, 230/240 Volts
Lamp holder, PVC/Polycarbonate body with back plate suitable for batten/pendant fittings or to be mounted on walls
S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, 110 lumen/watt, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed.
-ditto- as per Item No. 231 but of 1 X 9/10 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt
S&F in repair MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / CRABTREE / HAGER / SCHNEIDER / LEGRAND) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
S&F in repairs single pole enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps, 'C' Curve, 10 KA including all accesories complete all as specified and directed. (MAKE OF ENCLOSURE: LEGRAND, Cat No. 5078 10 / L&T, Cat No. DBMPS120SD / SCHNEIDER, Cat No: A9HMS220 / ABB, Cat No. NSYN8690SGKSP20 / C&S, Cat No: CSDBPSSPN020 /HAGER, Cat No: VYA220C) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
S&F in repair 20 Amps Metal clad socket (premium range), 3 pin (2P+E), complete all as specified and directed
S&F in repair 20 Amp Metal clad plug (premium range), 3 pin (2P+E), complete all as specified and directed.
BASU AND CO
DEB AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .