Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹11.5 L+₹1.9 L (20.2%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹11.7 L+₹2.1 L (21.6%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹11.9 L+₹2.3 L (23.9%)Rejected-AOC B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹14.8 L+₹5.1 L (53.5%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI K S YADAV,IDSE,SE
Military Engineer Services, HQ Commander Works Engineer Jammu, PIN-900172
REPAIR/MAINT OF GOD, LIGHTENING ARRESTER AND ALLIED WORKS UNDER AGE E/M UNDER GE SATWARI
2022_MES_543183_1
CWE/JP-33/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE SATWARI
CLASS E CAT b(ii)
9 documents required · 9 mandatory
₹500
GE SATWARI
₹30,000
Yes
13 Oct 2022
4 Aug 2022
1 Sept 2022
4 Aug 2022
30 Aug 2022
18 Aug 2022
60 days
Amount
Supply and fixing in replacement switch air break gang operated triple pole mechanically operated from ground level, mounted on insulators and steel frame (15 insulator type) outdoor type suitable for vertical installation single break provided with locking arrangement consisting of MS channel, HT post top porcelain insulator with drop out fuses operating rod 20 mm bore GI pipe medium grade confirming to relevant IS:1818 of 1972 and current rating 200 Amp and voltage 11 KV including jumpering, lead of wire/cable as directed at site including dismantling existing/unserviceable air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism and removing from site, complete all as specified and as directed. .
Supply and fixing in replacement of Switch air break gang operated triple pole mechanically operated from ground level, mounted on insulators and steel frame (15 insulator type) outdoor type suitable for vertical installation single break provided with locking arrangement consisting of MS channel, HT post top porcelain insulator with drop out fuses operating Rod 20m dia GI pipe medium grade confirming to IS:1818 of 1972 and current rating 400 Amp and voltage 11 KV including jumpering, lead of wire/cable as directed at site including dismantling existing/unserviceable air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism and removing from site, complete all as specified and as directed.
Supply and fixing in replacement Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp,11000 Volts grade conforming to IS-3070 part-I, complete, all as specified and directed by Engr-in-Charge.
Supply and laying synthetic rubber insulated mats 2.5 mm thick for voltage upto 11 KV for elecrical purpose as per IS 15652-2006, (superseding IS-5424) suitable for electrical shock safety of sizes 2m x 1m in front of HT panels, GOD etc. complete, all as specified and directed by Engr-in-Charge.
Supply and laying synthetic rubber insulated mats 3 mm thick for voltage upto 33 KV for elecrical purpose as per IS 15652-2006, (superseding IS-5424) suitable for electrical shock safety of sizes 2m x 1m in front of HT panels, GOD etc. complete, all as specified and directed by Engr-in-Charge.
Supply and spreading 20mm graded coarse aggregate in 33/11 KV switch yards, two pole/four pole structures, 11 KV Sub Stations complete, all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of anti climbing device, spikes type, fabricated out of MS bars (round, square or flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the poles, spike welded to flat iron, including on primer coat, one under coat and two finishing coats of silver aluminium paint including preparation of surfaces complete, all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of pin/post Type , Porcelain vitreous,White , brown insulator including one galvanised mild steel spindle , two galvanised iron washers and one galvanised iron nut , 150 mm height , 150 mm dia for 11000 volts grade complete, all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of male contact (moving contact blade) as per sample approved by GE suitable for 11 KV 400 Amp rating GOD including cable lead/wires, thimbles and connected items etc. compelte, all as per specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of female contact as per sample approved by GE (fixed contact jaw) suitable for 11 KV 400 Amp rating GOD including cable lead/wires, thimbles and connected items etc. compelte, all as per specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of tinned copper flexible jumper suitable for 11 KV 400 Amp rating GOD, compelte, all as per specified and directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in Poles/ four pole/two pole/HT & LT pole/panel/approach path to sub station (below or above ground level) and including removal of demolished materials out of defence land complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in replacement of Danger notice plate of 1.6mm thick MS sheet vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS flat clamps 25x3mm 2 Nos, nuts, bolts for LT 440 volts of size 20x15cm, complete all as specified and as directed by Engr-in-Charge.
All as per ser item No 13 above here-in-before but for HT 11000 Volts of size 25x20 cm.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to galvanized iron earth strip 25x4 mm size by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:3:6 type C-1. (c) Precast RCC cover with suitable handle 50 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 4 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.
Srl item No 15 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note :- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:3:6 type c-1. (c) Precast RCC cover with suitable handle 50 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 4 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.
Srl item No 16 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note :- On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.
Supply and fixing in replacement of GI Strip of size 25 x 4 mm along the wall, floor, ceiling etc all as directed by Enge-in-Charge
Supply and fixing in replacement of GI wire 4 mm dia along the pole, wall, floor etc all as directed by Engr-in-Charge.
Supply and fixing in replacement Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 10 kilo amp, HT 33 KV grade conforming to IS-3070 part-I, complete, all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of pin/post insulator HT 33 KV with all fittings complete, all as specified and directed by Engr-in-Charge.
Material and labour, cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts and wasters,welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one aluminum paint including dismantling of cross arms of MS fabricated complete with all accessories viz nut, bolts, washer etc. complete, all as specified and as directed by Engr-in-Charge.
Material and Labour, Chain link MS Galvanised fencing of 4 mm dia wire of size 50 mm x 50 mm cold dip fixed to angle frame and flat iron with suitable nuts and bolts any size or type complete, all as specified and as directed by Engr-in-Charge. Note:- Angle iron & nuts and bolts shall be measured and paid separately.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in pole foundation complete, all as specified and as directed by Engr-in-Charge.
Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping of poles/Transformer plinth etc including necessary form work complete, all as specified and as directed by Engr-in-Charge.
Surface excavation not exceding 30 cm deep in soil soft/loose and averaging 15 cm deep and getting out green vegetation, roots, bushes, etc surrounding of 2 / 4 / 6 pole structure / substations / panels complete, all as specified and as directed by Engr-in-Charge.
Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point complete, all as specified and as directed by Engr-in-Charge.
Rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished even and fair without using extra cement upto any height complete, all as specified and as directed by Engr-in-Charge.
Dismantling concrete poles/ struts, any size complete, all as specified and as directed by Engr-in-Charge.
Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting a side for re-use with in 50m complete, all as specified and as directed by Engr-in-Charge. Note:- Re-use the serviceable M.S channel/ cross-arms of 50%.
Dismantling insulators any type, any size complete, all as specified and as directed by Engr-in-Charge.
Supply and erection in vertical position Steel tubular swaged poles erected truly vertical or planted as strut complete with 300x300x6 mm thick mild steel base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, B-118 finial taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-55 (11.00 metres long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfacs of pole with two coats of aluminium paint over a coat of zinc chrome primer and two coats of black bitumenous paint internally & portion embedded in concrete, making five black and white alternate strips 30 cm upto 1.5mtr height from top of coping in strips and marking pole No. with black paint at suitable height including dismantling of existing pole & making good complete all as specified directed by Engineer-in-charge. Note: Excavation and earth work, PCC in foundation shall be measured and paid for separetely.
Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for taking out of unserviceble/laying new LT under ground cable complete, all as specified and as directed by Engr-in-Charge.
Returning filling in, approved soft/loosesoil, including spreading , levelling, watering and well ramming in layers each not exceeding 25cm in soft/loose soil complete, all as specified and as directed by Engr-in-Charge.
Material and labour in replacement of Aluminium conductor, steel reinforced wisel/fereet for making bus bar on pole streching including taking down unsv aluminium conductor complete, all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of HT 33 KV exposed steel surfaces of existing steel towers including cross arms and channels by scrapping old paint and applying of two coats of aluminium paint over a coat of red oxide primer on tower and switch yard of 33 KV complete all as specified directed by Engineer-in-charge.
BMMJ TRADERS AND ENGINEERS
M/S S K Electricals Regd
ANIKET TRADERS
Jiwan Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .