COMPREHENSIVE MAINT/ REPAIR TO SECURITY WALL FROM GATE NO 06 TO GATE NO 04 AND ARJUN NAGAR GATE TO CIVIL AIRPORT AT AFS STN AGRA

Amount

M&L for demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for all as specified & directed.

Taking down cement plaster in cement or cement lime mortar on cement concrete ,brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick works or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for use & waste form work to sides of pillars, posts and columns for rough finished surface of concrete complete all as specified & directed.

M&L for RCC 1:1.5:3, type B1, using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts & similar RCC works all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying two coats of cement base paint all as specified and directed.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for boundry wall or fencing, including concertina coil all as specified and as directed.

S & F Plain, Aluminium sheeting of thickness 0.71mm , Alloy 31000 H4 fix in RCC wall and straight flashing complete all as specified and directed.

M & L for mild steel post and strut in fencing including cutting to shape as directed ,drilling holes and similar work confirming to F-290 Gde E165 Complete all as specified and directed.

S&F polished silver razor wire, 3.5mm dia wire,blade to blade distance 25mm(min) ,razor size 22*15 mm all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long , diameter of neck 16 to 20mm all as specified and directed.

S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming Fe 410 -W (Gde-E- 250) quality-A all as specified & directed.

S & F in repair concertina coil 1050mm dia ( in stretched position), not dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified and directed.

Fixing only concertina coil 1050mm dia ( in stretched position), not dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed..

S&F in repair bottom wheel made up of mild steel Fe 2062 of dia 200 mm dia 45 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardning, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc complete all as specified and directed..

M/s M S Sharma and Co.

Shiv Krishan Associates

Sethi Brothers

M/s K S Builders

GUPTA ENGINEERING WORKS

JEE JEE BUILDERS

GIRENDRA SINGH AND CO