Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC Lowest quoted amount overall reasonable | |
| 2 | L2₹16.2 L+₹2.0 L (13.7%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest hence rejected | |
| 3 | L3₹17.1 L+₹2.9 L (20.1%)Rejected-AOC | L3 | Rejected-AOC 3rd lowest hence rejected | |
| 4 | L4₹17.1 L+₹2.9 L (20.1%)Rejected-AOC | L4 | Rejected-AOC 4th lowest hence rejected | |
| 5 | L5₹17.7 L+₹3.5 L (24.5%)Rejected-AOC NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-AOC 5th lowest hence rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Belgaum
Garrison Engineer Belgaum, Laxmi Tek, Camp, Belgaum
WELCOME MAINTENANCE TO OFFICERS MARRIED ACCN UNDER GE BELGAUM.
2022_MES_571181_1
8892/E8
Open Tender
Civil Works
Item Rate
240 days
Belgaum
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Belgaum
₹40,000
Yes
25 Feb 2023
24 Dec 2022
23 Jan 2023
24 Dec 2022
21 Jan 2023
7 Jan 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.
Material and labour for 10mm thick Rendering in CM 1:6 on fair faces of PCC block or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on brick work/PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound . Note : Make :Impermo/Roff/Cico
Material and labour for Preparation of new surfaces of ceiling and applying two coats of oil bound distemper (Acrylic distemper washable), any colour over a coat of chalk whitening primer primer complete all as specified and as directed.
Material and labour for Preparation of new surfaces of wall . and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whitening primer over 1mm thick layer of wall care putty complete all as specified and as directed.
Material and labour for Preparation of new surfaces of wall and applying two coats of cement based paint any colour over a coat of primer complete. all as specified and as directed.
Material and labour for Preparation of newly plastered or un plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of wall etc by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and washing, rubbing down and stopping and applying one coat of white wash complete. all as specified and as directed.
Description all as per item no :10 here in before but on ceiling surfaces
Description all as per item no :10 here in before but one coat of oil emulsion distember on wall surface (White or Tinted)
Material and labour for Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per item no :13 here in before but not exceeding 10 cm width or girth
Material and labour for Preparation of old painted steel and iron based surfacesurface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per item no :15 here in before but not exceeding 10 cm width or girth
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and washing, rubbing down and stopping and applying two coats of white wash complete. all as specified and as directed.
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etc and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of wall etc and applying one coat of cement based paint complete. all as specified and as directed.
Material and labour for Plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc.including necessary form work and Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris complete all as specified and as directed. .
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of wall, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etc and applyingone coat of exterior emulsion paint complete all as specified and as directed. Note :Make of exterior emulsion paint :Asian Paints : Brand :Apex
Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts ,trading oil and greasy spots etcand applying two coats of exterior emulsion paint complete all as specified and as directed. Note :Make of exterior emulsion paint :Asian Paints : Brand :Apex
Material and labour for Repair of disturbed/broken brick work in CM 1 :6 including filling of narrow intertices with PCC 1 :2 :4 type B 0 (using 12.50 mm graded aggregate ) after and including removal/root out of trees,, plants ,trunks ,grasses and creeps etc from roof or wall and finished the surface with 15 mm thick plaster in CM 1:6 complete all as specified and as directed .
Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.
Material and labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish
Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish
Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc and taken as credit complete all as specified and as directed
Supply and fix PVC (SWR) eaves gutter 150mm dia trapezodial shape Gde-I fixed with MS clamps complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince
Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince
Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince
Supply and fix in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.
Material and labour for Premium quality non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match with the floor including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed. Note :Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed.Note :Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Vitrified Coloured Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6completeall as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen
Material and labour for Premium glazed ceramic coloured tiles of size 200x300x 5.5mm/350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Khajaria/Naveen
Dismantling boarding of any description fixed in any position with nails and old unserviceable board of any description taken as credit complete. all as specified and as directed
Supply and fix in repairs 18/19mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB',on one side and with decorative veneer on other face fixed with screws to timber frame work complete all as specified and as directed.Note :Make of Particle board : Kitply/Green ply/Century Ply wood
Supply and fix in repair 15mm dia Bib taps, cast copper alloy Fancy type CP brass,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Note : Make : Metro/GEM/ESS ESS
Supply and fix in repair 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Note : Make : Metro/GEM/ESS ESS
Supply and fix in repair Vitreous china water closet, Pedestal type, white including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc .complete all as specified and as directed.
Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed.
Supply and fix in repairs 15 mm bore dia brass CP Mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.Note : Make Jaguar/Cera/Johnson
Supply and fix in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039
Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Note :Make: Jaguar /Hindware/Marc
Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.
Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Note :Make: Jaguar /Hindware/Marc.
Supply and fix in repairs brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed . Note : Make :Cat No.ACN 1151N of JAQUAR or equivalent model in Johnson/ Cera
Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/Marc.
Supply and fix in repair Health faucet , brass chromium plated suitable for 15 mm dia pipe with1.00 metre long flexiblePVC tube and ABS wall hook complete all as specified and as directed. Note :Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS
Supply and fix in repairs Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Note :Make: Cat No. CAN-CHR-1111N of Jaguar or equivalent model in JOHNSON/ ESS ESS.
Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Note :Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.
Supply and fix in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device completeall as specified and as directed. Note :Make :Parryware/CERA/Johnson
Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Joyna/Commander
Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries
Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries
Supply and fix in repairs 3 way mixer tap for mixing hot and cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed Note:Make :Jaquar Wall Mixer CON-273KNUPR - CON-273KNUPR or equivalent model in Hindware/MARC
M/s. N D KALING
M/S MAHADEV M PATIL
SAMARTH ASSOCIATES
N K CONSTRUCTION
Sourabh Sanjay Angolkar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .