8121/SAR-22/E8 CAMOUFLAGE PAINTING TO CERTAIN BLDGS IN DOMESTIC AREA AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed (Note:- WPC will be measured and paid for separately.

Supply only (liquid type) water proofing compound (isi Marked) complete all as specified and directed.

M&L for Complete removal of existing treatment on walls/ceilings and preparation of surfaces of walls/ceilings and applying 01mm thick wall care Putty complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats Apex weather proof exterior emulsion paint of any tint over a coat of primer manufactures by ASIAN/BERGER Paints or equivalent complete all as specified and as directed. Note : The Camouflag/Plain pattern of colour shall be as approved/decided by the Eng-in-Charge/Airforce Authority.

Material & Labour for Preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of cement base paint white or tinted complete all as specified and directed.

Materials & Labour for preparation of old decorated plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and directed.

Materials and labour for preparation of old existing AC sheets/concrete/plastered surfaces of any description and at any position not otherwise described over 10 centimeter in width or girth and applying one coat Apex weather proof exterior emulsion paint of any tint manufactures by ASIAN/BERGER Paints or equivalent complete all as specified and as directed. Note : (i) The Camouflag/Plain pattern of colour shall be as approved/decided by the Eng-in-Charge/Airforce Authority. (ii) The rate quoted by tenderer is deemed to included in item for painting in any type of Bldgs/wall upto 5.00 m height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

Material and labour for preparation of old existing AC sheets/concrete/plastered surfaces of any description and at any position not otherwise described over 10 centimeter in width or girth and applying one coat Apex weather proof exterior emulsion paint of any tint manufactures by ASIAN/BERGER Paints or equivalent complete all as specified and as directed any tint. Note : (i) The Camouflag/Plain pattern of colour shall be as approved/decided by the Eng-in-Charge/Airforce Authority. (ii) The rate quoted by tenderer is deemed to included in item for painting in any type of Bldgs (incl tripple storey) above 5.00 m and upto 15.00 m height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern or pattern as directed by Engr-in-charge. Note : (i) The Camouflag/Plain pattern of colour shall be as approved/decided by the Eng-in-Charge/Airforce Authority. (ii) The rate quoted by tenderer is deemed to included in item for painting including all type Bldgs including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L for preparation of old steel and iron surfaces of any description n exc. 10cm in width or girth and applying one coate of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

Dismantling Plain or Corrugated steel sheeting, any gauge, thickness ,including Nainital or similar pattern roof coverings.

M&L for Pre-painted galvalume aluminium zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,roofs,fixed with self tapping screws or of L-type or J-type or cranked hook bolts complete all as specified and directed by Eng-in-Charge.

Gupta Enterprises

NAVEEN KUMAR TYAGI

G.H. INFRASTRUCTURE PRIVATE LIMITED

RAMAPATI ENGINEERING SERVICES

DHARAMPAL SINGH AND SONS

M/s RKG CONSTRUCTIONS

sidh builders

DHIMAN ENGINEERS & BUILDERS