REPLACEMENT OF WORN OUT OLD VINTAGE STREET, GATE, GARDEN AND FLOOD LIGHTS WITH LED LIGHTS IN DGQA TECHNICAL AND RESIDENCIAL COMPLEX UNDER AGE EM-II OF GE UTILITY SECUNDERABAD

Amount

Taking down street light fittings of any watt ( tube light / T5 fittings only) from existing position on pole/ wall/ tower, complete and diposite to MES store yard complete all as specified and as directed

Taking down serviceable street light fittings of any watt and type from existing position on pole/ wall/ tower including bracket / clamp and refix the same at new location on pole etc, complete all as specefied and directed.

Taking out unserviceable junction boxes of any type or size for replacement from pole/wall and removing the same from site complete all as specified and directed.

Taking out unserviceable service connection of any type or size for replacement from pole/wall/ OH conductor and removing the same from site complete all as specified and directed.

Taking down old unserviceable post top lantern/bollard / Garden/ Gate light fitting of any watt and type from existing position complete for repair and replacement all as specified and as directed.

Supply, fixing, connecting and testing LED Post top lantern of 40/45 watt capacity in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life, aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity and connecting with 2.5 sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixed to Pole/Wall in any position including taking down old existing street light fitting of any type and capacity complete all as specified and directed. Make:- Philips Cat Part No BGP161 LED2500/NW PSU 220-240V 7043 IN or CG MODEL NO LPTO 40 CDL or Wipro cat No.LP07-501-XXX-57-CL or Bajaj model BGCL 40W LED WH.

Supply, fixing, connecting and testing decorative LED Bollard light with opal diffuser and aluminium reflector of 8/9/11 watt LED including nut, bolts, washers, clamps etc as in repair complete all as specified and directed. Make:- C&S Cat Part NoLTGLCW9WLED or SURYA MODEL NO SLEBL 6W BLK800 or Havells Cat No. BAMBOOBL8WLED830SSYMTOPCM (1.0) or Wipro cat No.LB14-131-XXX-65-05.

Supply, fixing, connecting and testing energy saving, environmental friendly long life Varsatile pressure die cast aluminium alloy for housing (heat sink) with IP66 protection road way light fitting with high power LED as light source of capacity 60 watts with warranty option of 5 years with suitable driver and cable gland for maintaining ingress protection with Epoxy powder coated siemens grey finish after phosphochromate treatment, Tempered protective toughened glass,thermal shock and impact resistant fixed to the housing with SS screws , High efficiency long life LED chip in modules with lumen efficacy of >140 lm/W with PC lens and system lumen 6000. Powered by Built-in electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection. CCT 5700, CRI>70, THD<10%, PF>.95, IP66, IK07.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +50 DEG.C; Input Supply Voltage Range:140-270 V,

Frequency:50-60 HZ, Driver safety requirement standards :IS 15885-2-13, Test report to be submitted for Driver performance requirements as per IS 16104, for Photo bilogical safety norms as per : IS 16108, Certification as per LM 79 for Luminaire , LM 80 for LED Source, with all standard accessories etc, including disconnecting and taking down old existing light fittings any type/capacity from any height/position complete all as specified and as directed.

Make: Bajaj Cat No.BRTFG 60W LED V3 or Havells Cat No. ENDURAPEARLPLUSSL60WLED757SASYTOPC or Wipro cat No. LR02-671-XXX-57-G2.

All as per item No. 8 above, but 90 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: Bajaj Cat No.BRTFG 90W LED I or Havells Cat No. LHETBXU7PA6J090 or Wipro cat No. LR02-102-XXX-57-G2.

All as per item No. 8 here-in-before but Flood light of high power LED as light source of capacity 200 watts.. Make: Make : Bajaj Cat No.BARFEG 200W LED or Havells Cat No. LHEPCZBFP46J200 or Wipro cat No. LF20-272-060-57-G2.

All as per item No. 8 here-in-before but Flood light of high power LED as light source of capacity 100 watts.. Make: Make : Bajaj Cat No.BARFEG 100W LED or Havells Cat No. JETAIRISFLS100WLED757SYMLTG or Wipro cat No. LF20-122-060-57-G2. Notes for item Nos 8 to 11 :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection (In-built) of the drive shall not be less than 10 KV or equivalent model in philips or Wipro.

M&L for fabrication and installation of GI pipe bracket made of midium Grade tubing of size 40 mm dia, duly bent by hot forging after filling of sand, length 1.20 mtr including providing two pair of MS flat strip clamps of size 40 mm x 4 mm with GI bolts nuts and washer complete all as specified and directed.

M&L for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit of dia 20 mm medium grade exclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc, complete all as specified and directed. Note:- 2 runs of 2.5 sqmm cable, 1 run of 1.5 sqmm and PVC conduit 20 mm dia shall be measured as one length.

S&F for hot pressed moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed. Make: Hensel/Syntex/C&S/Neptune.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in hard / dense soil complete all as specified and directed.

All as per item No.15 above, but depth exc 1.5m and n. exc 3m.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L filling approved river sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 8 cm thick before laying the cable and 15 cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note :- Thickness of sand cushion after punning down shall be measured as 18 cm for payment purpose.

Supply, lay, test and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volls grade, cross-sectional area 10 Sqmm 4 core laid in trenches / duct or fixed to wall / passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminium conductor including disconnecting and taking down existing damaged cable/ joints of UG cable of any type from trenches/ducts/poles/walls etc complete all as specified and directed.

Supply, lay, test and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volls grade, cross-sectional area 10 Sqmm 2 core laid in trenches / duct or fixed to wall / passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminium conductor including disconnecting and taking down existing damaged cable/joints of UG cable of any type from trenches/ducts/poles/walls etc complete all as specified and directed.

Supply and Lay un-reinforced precast concrete cable covers, class LV, type-I, flat of size 250mm x 150mm x 40mm laid across in trenches for cable protection as in repairs complete all as specified and directed.

M&L cross arms, bracing supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as directed including applying two coat of Ist quality aluminum paint over one coat of red oxide primer and fixed over Pole of any height etc complete all as specified and directed.

Supplying, errecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide including taking down old existing PCC poles of any type complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply and fixing lantren of dia 60 cm for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole, made of MS pipe medium grade dia greater than the top dia of the pole of length 0.35 m supported by MS flat iron of size 50X6 mm, 8 nos including two coats of aliminium painting over a coat of red oxide primer complete all as directed

S&F Timer box made of MS sheet 2mm thick of size 30X25X15 cm, Powder coated Suitable for fixing at Pole including two sets of clamps including internal connections done by using Suitable size of copper wire complete all as specified and directed and comprising with the following provisions:- i) MCB SPN 20Amps 10 KA- 01 No. , ii) Timer Analog Type Suitable for 24 hours operation of street light Make: Legrand /AVV CG. iii) Contactor two pole 40 Amps, 415 VOLT COIL OPERATING VOLTAGE 230 VOLT. iv) Auto manual switch 10 amps (Make : Kaycee/L&T/ Legrand).

S&F Junction box made of MS sheet 2mm thick of size 25X35X15 cm Powder coated Suitable for fixing at Pole and two set of clamps including internal connection done by using suitable size of copper wire and dismantling of old unserviceable one complete all as specified and as directed with the followingprovisions:- i) MCB SPN 20Amps 10 KA- 01 nos , ii) MCB SP 10 Amps - 4 Nos iii) Connecter 5 way 20 amps for neutral tappings.

Supply and lay PVC Insulated , PVC sheathed industrial HV round multi core flexible cable with copper conductor twin core 2.5 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings complete all as specified and directed..

Supply and lay PVC Insulated , PVC sheathed industrial HV round multi core flexible cable with copper conductor twin core 4.0 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling and mass concrete for pole / stay / post / Lights etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in coping /pedestals of poles including necessary form work and applying two coats of white wash to exposed surface of coping/platform complete all as specified and directed.

Supply and fixing bracket/clamps made of MS flat strips, angle iron suitable size and shape duly fabricated to be fixed with GI bolts/nuts and washer for fixing of GI bracket, PVC conduit, pole junction box or flood lights complete all as specified and directed.

Supply and replace GI pipe fixed on the top of gate piller by 50 mm dia medium grade GI pipe of length 30 cm( 20 cm inside the piller and 10 cm above the piller including necessary cement work and making hole on GI pipe if required complete all as specified and directed. Note: Quoted rate inclusive of making good of dosturbed suface including necessary painting to match with the adjoining surface.

All as per item No.34 above, but single phase load of 12 KW with Circuit wiring min 25 sq mm 3 nos contactor each of 20-25 amps incoming outgoing MCB (3 nos) rating 20-25 amps Make:-Model No. Swadeep-02EC12kW1P or techno commercial equivalent make as approved. Note for item No 34&35 :- The contractor shall obtained 1year gurantee and 1 year waranty for the sensor and 1 year waranty for other accessories from the manufacturer and shall submitted to the deparment duly signed by all concerned.

Supply, fixing, connecting and testing for advance maintenance free G.I. SAFE EARTHING electrode with PIPE of not less than 50 mm outer dia (Thickness not less than 2.5mm) and two meter length, the electrode should be of galvanised (80 -100 micron) along with earth lead as galvanised steel strip of size 32X6 mm, 7.5 m length. The GI Electrode shall be pre-filled with Cristalline Conductive Material (CCM) having anti corrosive and conductive properties to provide annular space of earth electrode and the GI electrode shall be surrounded with 25 kg Back fill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification. GI Electrode Shall be tested from CPRI, signed by all concerned and kept on record and including excavation, earth work, PCC pit, RCC cover 50 mm thick of size 450 x 450 mm using 8mmdia deformed bars @ 150mm c/c, lifting handle rod 8mm dia, GI protection pipe 40 mm dia light grade for protection of inter connecting earthing strip from mechanical protection and testing on completion, as in replacement complete all as specified and directed. Make:- ASHLOK / INDELEC/ JMV / TERCEL.

Notes :- (i) The quoted rate is deemed to be included earth work in any type of soil, removal of surplus soil from site, test link for test point, necessary sadling and mounting of GI strip on walls complete. (ii) The length of GI strip beyond 7.5 mtrs shall be measured and paid seperately. (iii) Workmanship shall be carried out in accordance with guide lines of OEM for installation and commissioning and the certificate from concerned OEM to this effect shall be obtained and submitted to the GE.

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of lights complete all as specified and directed.

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 6.0 Sqmm for connection of lights complete all as specified and directed.

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 2.5 Sqmm for connection of lights complete all as specified and directed.

Supply and fix LED Bush light red/green/blue in colour, 6/8/9 watt capacity including necessary fixing arrangement complete all as specified and directed. Make: Bajaj Cat No.BGSBL 9W LED or Wipro cat No. LF05-600-036-XX- or Jaquar Cat No. LSPK04R108XW

Supply, lay, test and commissioning of galvanized iron tubing 50 mm bore light grade with all fitting for hanging of ceiling fan / protection of cable /for fixing of garden light incl necessary clamp, bolt/nut if any and making hole on wall complete all as specified and as directed.

Supply and fix Solar LED street light of 90 watt capacity with inbuilt solar panel incl inbuilt battery on the top of the pole complete all as directed . Make: Luker Cat part No. LSTSOL90 or techno commercial equivalent make and model of Philips/wipro.

M&L for cutting the existing road straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.

M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, MS casing pipe havy duty of size 100 mm dia with 6 mm thick in any length including jointing materials to carry LT UG cables of size upto 400 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed.

The Deccan Engineering and Refrigeration Company

Srinivasa Consructions

STANDARD AGENCIES

Brite electricals

vvcenterprises

POWER CONSTRUCTION COMPANY