8911 WELCOME MAINT CERTAIN REPAIRS AND PERIODICAL SERVICES AT DOCKYARD HOUSE RAFIYA MANZIL MIDDLE GROUND OYSTER ROCK INWTC AND BOAT POOL AREA UNDER AGE BR II UNDER GE NW KUNJALI

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding for high rise building upto terrace etc as required and rubbishing off the premises etc complete all as specified and as directed..

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.

M & L for rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including necessary scafolding for high rise bldgs etc all as specified and directed. (Note : Water proofing compound to be measured and paid for separately).

M & L for rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including all as specified and directed. (Note : Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.

M &L for applying two coats of oil emulsion distemper over newly plastered/ putty surfaces of wall all as specified and as directed by Engr in-Charge

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed by Engr in-Charge

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather acrylic base paint (100 % acrylic) over one coat of cement based primer with necessary scaffolding for high rise bldgs etc all as specified and as directed by Engr in-Charge

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified and as directed by Engr in-Charge

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat Chalk whiting, on plastered surfaces,

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified & directed.

M&L for preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) all as specified & directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of Plastic emulsion paint, on plastered/puttied surfaces,

M&L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint all as specified and directed

S & Fix in repairs QPS-WHT-7753P180UF SPMZ of Jaquar or equivalent make of Cera, Hindware etc rimless bowl with side flush cistern for couples water closet UF soft close seat cover,hinges,single flush cistern, fitting and fixing accessories, size 420x710x810mm, P or S trap complete all as specified and directed by Engr-in-Charge.

S & F in repairs Water Closet cat part No 20089(S-10) ,Cat part No 21038 Cistern and seat cover of Hindware or equivalent make of Jaquar, Cera etc ,hinges,single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed by Engr-in-Charge.

S & F in repairs floor mounted coupled water closet cat log No LYS-WHT-38751P cat log No LYS-WHT-38201 cistern,of Jaquar or equvalent make of Cera, Hindware etc bowl for coupled WC with UF soft closeseat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply only cast iron 'P' trap 100mm dia

S&F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs health faucet (ABS Body) Stainless model No 902 of Silver shine or equivalent suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair under counter wash hand basin vitreous china Cat part No CNS-WHT-705 of Jaquar or equivalent white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified (Make - Jaquar/Cera)

S&F in repair table top wash hand basin vitreous china Cat part No JDS-WHT-25909 of Jaquar or equivalent white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified (Make - Jaquar/Cera)

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair.

S&F matt finish stainless steel double bowl with single drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size `730x510mm and bowl size 510 x 405 x 250mm fixed in repair.Cat log No SSDBSD-99 of Silver Shine or equivalent.

S & F Stainless steel wire baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with soft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel multipurpose baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with soft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel cutlery unit,cup and saucer unit baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with soft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel thali basket SS 304 or equivalent with full extension sliding mechanism used as drawer with soft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel undersink basket SS 304 or equivalent with full extension sliding mechanism used as drawer with soft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

M & L in repairs 18 mm thick both side prelaminated marine plywood suitable for cupboards, drawers etc of any colour

Auto close hinges stainless steel for full overlap for cup board shutters etc

Stainless Steel cabinet/ door/drawer handle decorative handles suitable size variying from 100 to 200 mm

S & F in repairs SS Magnetic door catcher for drawer, cupboards etc

S&F Stainless steel locks suitable for cupboards, drawers etc

S&F in repairs plate rack made of stainless steel, 910 x 1220X0.25 mm including fixing as per manufacturers instruction.(SSKPR-318 or equivalent)

S&F in repairs plate rack made of stainless steel, 910 x 910X0.25 mm including fixing as per manufacturers instruction.(SSKPR-317 or equivalent)

S & F in repairs wall mixer with provision for overhead shower with 115mm long bend pipe on upperside, connecting legs & wall flanges. Cat Log No FUS-29273UPR of Jaquar or equivalent.

S & F in repairs wall mixer 3 -in- 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flanges (without hand & overhead shower). Cat Log No FUS-29281 of Jaquar or equivalent.

S&F in repairs Maze overhead shower 300x300mm square shape single flow (Body and Face plate stainless steel with chrome finish) with rabit cleaning system cat log No OHS/CHR-1639 of Jaquar or equivalent.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed Cat log No FUS-29001 of Jaquar or equivalent.

S&F in repairs fancy type cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed Cat log No FLR-5357N of Jaquar or equivalent.

S&F in repairs fancy type cock suitable for sink 15 mm dia, screwed for iron pipe and fixed Cat log No CON-349KN of Jaquar or equivalent.

S&F in repairs fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed Cat log No CON-357KN of Jaquar or equivalent.

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-037KN of Jaquar or equivalent.

S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-041KN of Jaquar or equivalent.

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed Cat log No CON-053 KN of Jaquar or equivalent.

S & F in repairs Stainless steel towel ring round with round flange Cat Log No CAN-1121BN of Jaquar or equivalent.

S & F in repairs Stainless steel single towel rail 600mm long Cat Log No CAN-1111NM of Jaquar or equivalent.

S & F in repairs Stainless steel swivel towel holder twin type Cat Log No CAN-1115N of Jaquar or equivalent.

S & F in repairs Stainless steel swivel towel rack 600 mm long without lower hangers but with 3 hooks Cat Log No ACN-1181FHN of Jaquar or equivalent.

S & F in repairs Stainless steel toilet paper roll holder Cat Log No ACN-1151N of Jaquar or equivalent.

S & F in repairs Stainless steel soap dish holder Cat Log No ACN-1131N of Jaquar or equivalent.

S & F coner glass shelfwith bracket Cat log No CAN-1173 of Jaquar or equivalent.

S & F in repairs 8 mm to 10 mm thick wooden flooring and skirting including spung/polythene complete all as specified and directed (Make hego/pergo or equivalent)

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/Chanakya/Everest.

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.

S&F 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing. (Make Rajshree or equivalent)

S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. (Make - Rajshree or equivalent).

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description not exc 1 sqm each

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc all as specified and as directed by Engr- in- charge.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F Stainless steel butt hinges 100 mm.

S&F 75 mm Stainless steel butt hinges and fixed.

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165

S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg

S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

S&F 12mm thick plywood ,grade bwp type BB, fixed with screws to timber frame as in paneling/partition complete all as specified and as directed..

M&L 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.

S&F 1st class hard wood moulding as in cornices , joints of wall panelling board etc sectional area not exc 6 sqcm incl necessary french polishing complete all as specified and as directed..

S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240

S&F in repair 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise provided and M&L for RCC 1:1.5:3 nominal mix (20mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concretefor in steps/landings at Jetty side including necessary form work ( The work to be executed depending upon high/low tide of sea, to make necessary arrangement accordigly)

Demolition of reinforced cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M &L reinforced cement concrete type B1 1:2:4 (20 mm graded agg) as in chajjas,slabs,beams etc with necessary form work.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

All as per srl item No. 116 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

M&L for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete

M&L for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified.

M&L for sand under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required.

Material and Labour for machine pressed chequered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) cement concrete as a leveling course on roof surfaces and coping etc.

M&L for applying a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. After applying of bituminous primer applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces. Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm, as specified here-in-after. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet . over the APP membrane provide a polypropylene/polyester, non woven geotextile fabric of 150 gram/Sqm complete all as specified and directed.. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of bituminous primer and a coat of bitumen 85/25 at the rate of 1.2 Kg per Sqm for APP membrane omplete all as specsified and directed by Engineer-in-Charge.

M&L for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

M&L for cement concrete 1:3:6 type C-1 , (20 mm graded stone agg) as in foundation filling and sunken floors etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

Demolition & breaking up drain pipes salt glazed ware, reinforced cement concrete, set in cement mortar 100 mm dia

S & F 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls.

-do- but 75 mm bore

S & F PVC (SWR) bends 110 mm

-do- but 75 mm bore

S & F PVC (SWR) branch piece 110 mm single Y

-do- but 75 mm bore

S & F PVC (SWR) vent cowl 110 mm

-do- but 75 mm bore

M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75 mm dia.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by EIC

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps all as specified and directed.

S&F 160mm dia bore PVC (SWR) bends any radius

M&L for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded stone agg) as in sub base.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement complete.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe

-do but 20 mm bore

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

S&F rotational moulded polythylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S&F 2mm thick Linoleum ,plain coloured laid in floors incliding streching, cutting , fitting incl seales down with an approved adhesive all as specified.

S & F 16 mm thick perforated particle board/ tiles for insulation and accoustic purpose, 60X60 cm in size, fixed with nails to timber frame work or with staples on snap grid for wall all as directed and approved and specified.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scaffolding for high rise bldgs etc all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scaffolding for high rise bldgs.

S&F 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where direted.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.

M&L preparation of paved/chequred floor area and applying one coat indigo floor paint or equvalent all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles in roofing laid dry

All as per item No 184 above but bedded in cement mortar

Dismantling of tile battens of any size incl fillets spacing exc 15 cm

Dismantling of unframed timber scantling 40sqcm and over in section in any position all as specified.

Dismantling of unframed timber scantling under 40sqcm in section in any position all as specified.

Dismantling boarding of any description, fixed in any postion with nails

M&L for second class hard wood timber scantling clean sawn unframed

All as per item No 190 but except timber

S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

M&L for 2nd class HW battens for tiles etc clean sawn sectional area exc 15 and n.exc 25 sqcm and spacing of 30 cm centre to centre

M&L for roof tiles, Mangalore pattern , interlocking at side joints laid dry.

M&L for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6

M&L for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil all as directed (measured over all one side only, spaces not deducted).

S&F for 2nd class HW boarding 25 mm thick planed one side with butt joints and fixed with nails in any position.

S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.

S & F aluminium Curtain rod 20mm bore antick coated

S & F brackets suitable for item No 199

S &F brass Key lock round knob type(locking mechanisum) easy push button facility for locking inside suitable for all doors all as specified and as directed Make Godrej or equivalent.

S & F SS grating suitable for 100/75 mm bore all as specified and as directed.

MADHU ENTERPRIZES

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.

PRABHU ASSOCIATES