REPAIR/MAINTENANCE OF CERTAIN WOODEN FURNITURE ITEMS OF MARRIED AND OTM AT BSO UNDER GE SHILLONG

Amount

Note : (a) Work will be executed where the furniture exist in different user units of GE Shillong including BSO furniture yard complete as directed by Engr-In-Charge.

CHAIR DINING - FD- 279

Removing of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 1.01 above but front leg

All as 1.01 above but side rail

All as 1.01 above front/ back rail

All as 1.01 above but stiffner

All as 1.01 above but back strip

Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR DINING JCO/Ors - FD/MAP-II/05

S&F new PVC seat 4mm thick with holes screwed with rails all as specified in drg including removal of old existing unsv PVC seat of chair complete, as directed by the Engineer-in-Charge

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 2.02 above but front leg

All as 2.02 above but side rail

All as 2.02 above front/ back rail

All as 2.02 above but stiffner

All as 2.02 above but back strip

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR WOODEN BOTTOM W/O ARMS - FD-285

M&L for removal of old existing unsv plywood seat as existing of chair in any position, S&F new BWR grade plywood seat of appropriate size as per drawing and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood (teak)

All as 3.02 above but front leg

All as 3.02 above but side rail

All as 3.02 above but front/ back rail

All as 3.02 above but wooden back strip

All as 3.02 above but stiffener

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR WRITING - FD-280

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 4.01 above but front leg

All as 4.01 above but side rail

All as 4.01 above but front or back rail

All as 4.01 above but back strip

All as 4.01 above but arm rest

All as 4.01 above but stiffner

Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

CHAIR EASY - FD-229

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 5.01 above but front leg

All as 5.01 above but side rail of seat frame

All as 5.01 above but front or back rail of seat frame

All as 5.01 above but side rail of back frame

All as 5.01 above but top or bottom rail of back frame

All as per item No 5.01 above but replacement of arm rest

Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

SOFA SET 05 SEATER WITH CUSHION - FD-281/373/ 258

M & L for removing old unsv front leg and S&F of new front leg made of 1st class hard wood (teak) as per existing shape and size.

All as 6.01 but Rear Legs.

All as 6.01 but Side Rails.

All as 6.01 but Front Rails for Large three seater.

All as 6.01 but Back Rails for Large three seater .

All as 6.01 but Front Rails for Single seater.

All as 6.01 but Back Rail for Single Seater.

All as 6.01 but Arm Rests.

All as 6.01 but Teak Wood Batten for Seat and Back

Supply of Cushion of size 21'x22'x4' Foam 40 Density 100mm thick (Make : Sleepwell/Kurl-on Goldline /Featherfoam with Cushion cover of superior quality duly Stiched as per direction of Engr-in-charge/GE . Quality of tapestry Cloth shall be as per sample kept at GE office . Colour of tapestry cloth shall be approved by Engr-in-Charge/Garrison Engineer.

PEG TABLE - FD-277/384

Taking down old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 7.01 above but leg made of 1st class hard wood(teak)

All as 7.02 above but long top rail

All as 7.02 above but short/bottom rail

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TEAPOY - FD-278, FD-382

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as 8.01 above but leg made of 1st class hard wood(teak)

All as 8.02 above but long rail

All as 8.02 above but short rail

All as 8.02 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING 1200 x 900mm - FD- 273/FD/MAP-II/03

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade prelaminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining all as per drg & as directed by Engineer-in-charge.

All as 9.01 above but new leg made of 1st class hard wood

All as 9.02 above but long rail

All as 9.02 above but short rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE DINING 6 PERSONS FD- 273/FD/MAP-II/03

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 10.01 above but new leg made of 1st class hard wood

All as 10.02 above but long rail

All as 10.02 above but short rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING 8 PERSONS - FD-273/FD/MAP/II/03

Removing of old existing unsv top from table dining and S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board (Make : Green panel max/ Century/Archid ply/Kit ply) with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed by Engr-In-Charge.

All as 11.01 above but S&F new leg made of 1st class hard wood

All as 11.01 above but long rail for Table Dinging 8 Person

All as 11.01 above but short rail

All as 11.01 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 MM WITHOUT DRAWER - FD-284

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 12.01 above but leg made out of 1st class hard wood

All as 12.02 above but long rail

All as 12.02 above but short rail

All as 12.02 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 600 MM WITH DRAWER - FD-283

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 13.01 above but leg made out of 1st class hard wood

All as 13.02 above but long rail

All as 13.02 above but short rail

All as 13.02 above but stiffner

Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood all as directed by Engineer-in-charge

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE 900 x 900 (3'x3') - FD-228/291

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 14.01 above but leg made out of 1st class hard wood

All as 14.02 above but rail

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE CENTRE - FD-235/274

Taking down old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 15.01 above but leg made out of 1st class hard wood

All as 15.02 above but long rail

All as 15.02 above but short rail

All as 15.02 above but stiffener

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE BED SIDE - FD-276

S&F new back Ply for table bed side of 6 mm ply BWR grade IS:303 as per drg, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new shelf for table bed side with 12 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new side plank for table bed side with 18mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new top/base for table bed sidewith 18 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

TABLE OFFICE CLERK - DB-4120

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/Kitply). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 17.01 above but leg made out of 1st class hard wood

All as 17.02 above but long rail

All as 17.02 above but short rail

All as 17.02 above but stiffner

Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood all as directed by Engineer-in-charge

Taking down old existing unsv lock of table in any position & S&F new lock 50mm long, 04 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) complete all as specified in drg and directed by Engr-in-charge/GE

TABLE WRITING JCO/MED - DB-3948/ DB-3982

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid PlyKitply. with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 18.01 above but leg made out of 1st class hard wood

All as 18.01 above but long rail

All as 18.01 above but short rail

All as 18.01 above but stiffner

Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood all as directed by Engineer-in-charge

Taking down old existing unsv Cabinet door with complete fittings of table in any position & S&F new Locker/Cabinet door with complete fittings including knob in shade as specified in drawing and directed by Engr-in-charge/GE

Taking down old existing unsv lock of table in any position & S&F new lock 50mm long, 04 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) complete all as specified in drg and directed by Engr-in-charge/GE

TABLE WRITING - FD-275

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it all as directed by Engineer-in-charge.

All as 19.01 above but leg made out of 1st class hard wood (Teak)

All as 19.02 above but long rail

All as 19.02 above but top/bottom short rail

All as 19.02 above but stiffner

Taking down old existing unsv drawers with knobs of table in any position & S&F new drawers with knobs made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv Locker/Cabinet door with complete fittings of table in any position & S&F new Locker/Cabinet door with complete fittings including knob in shade as specified in drawing and directed by Engr-in-charge/GE

Taking down old existing unsv sides of side locker of table in any position & S&F new sides of side locker made out of 18/19mm thick exterior grade pre laminated MDF board all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Taking down old existing unsv shelf of side locker of table in any position & S&F new shelf of side locker made out of 12 mm thick exterior grade pre laminated MDF board all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Taking down old existing unsv back of side locker of table in any position & S&F new back of side locker made out of 6mm thick commercial BWR grade plywood (Make : Kitply Century/ Archid Ply/National Plywood)complete all as specified in drg and directed by Engr-in-charge/GE

Taking down old existing unsv lock of table in any position & S&F new lock 50mm long, 04 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) to cabinet of table complete all as specified in drg and directed by Engr-in-charge/GE

Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest all as shown on drg and as directed by Engr-in-charge.

TABLE DRESSING LADIES WITH MIRROR - FD-251

S&F new looking mirror of size 1220 x 366 x 5mm thick shall be fixed to the frame of teak wood and polishing complete in all respect to fix on wall as shown in drawing and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge. Make:- Modi-guard/Saint-Gobain/Swastik

S&F new 25mm size CP knob as per shape and size as shown in drawing and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge.

S&F new 05mm thick sheet glass with plastic handle for shutter as per sample, shape and size as shown in drawing and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge.

S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge.

S&F new sunmica from the top , sides and front of table dressing ladies 1.6 mm thick teakfaced sunmica of best quality fixed with adhesive as per shape and size as shown in drawing and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge.

S&F new sunmica to the drawer and shelf of table dressing ladies 1.6 mm thick sunmica of best quality fixed with fevicoal as per shape and as shown in drawing and including taking down old unserviceable one complete all as specified and as directed by Engr-In-Charge.

TABLE DRESSING GENTS WITH MIRROR - FD-230/279

S&F new looking mirror to table dressing gents , of size 760 x 380 x 5mm thick shall be fixed to the frame of teak wood and polishing, all as shown on drawing, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge. Make: Modi-guard/ Saint-Gobain/ Swastik

S&F new 1.6 mm thick sunmica of table dressing gents of best quality fixed with fevicoal adhesive as per shape and size shown in drawing, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new drawer of table dressing gents with 1.6 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge.

S&F new 25mm size CP knob for table dressing gents as per sample, shape and size shown in drawing, complete, including taking down old unserviceable one, all as specified and as directed by Engr-in-charge

BED HARD - FD-213, 245,246

Removing of old unsv plytop from bed hard and S&F New ply wood top of 12 mm thick Commercial BWR Grade IS:303 (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).complete as per existing shape ,size and as per Drg complete all as specified and as directed.

All as 22.01 above but long rails of 1st class teak wood

All as 22.02 above but short rails

All as 22.03 above but stiffner

All as 22.04 above but leg

Removing of old unsv veener ply from Head wing board and S & F of new 4mm thick thck face veener ply (Make : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold) complete as per existing shape ,size and as per Drg and all as specified and as directed.

Removing of old unsv veener ply from Foot wing board and S & F of new 4mm thick thck face veener ply (Make : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold) complete as per existing shape ,size and as per Drg and all as specified and as directed.

SIDE BOARD - FD-241/ 372

Removing of old existing unsv top from Side board and S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board(Make : Green panel max/ Century/Archid ply/Kitply) with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed by Engr-In-Charge.

All as per srl item No 5.01 here-in-before but door of side board including CP knob and continues piano type hinges.

All as per srl item No 5.01 here-in-before but side of side board.

Removing of old existing unsv back ply of side board and supply and fixing the new back ply of same size of 06mm thick commercial plywood (ISI marked),BWR grade all as shown in drawing and as directed (Make - Greenply/Kitply/Century)

Replacement of old existing unsv drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-lamianted particle board teak faced and including CP Knob.Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish.

Removing of old existing unsv lock and S&F of new lock 50mm, 4 lever ( Make - Godrej/Link/Plaza) magnetic catcher to side board as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to side board as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv knob from the side board and supply and fixing new knob as per sample ,shape and size all as per drawing and as directed.

Removing of old existing unsv legs from Side board and supply and fixing new Ist class hard wood teak leg of side board all as shown on drawing and as directed.

BOOK CASE/BOOK CASE WITH SLIDING GLASS SHUTTER - FD-237

Removing of old existing unsv top from Book Case and supply and fixing new top made out of 18/19mm thick commercial pre-laminated MDF board exterior grade (Make : Green panel max/ Century/Archid ply/Kitply). with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed.

All as per srl item No 24.01 here-in-before but shelf.

All as per srl item No 24.01 here-in-before but side of Book case.

All as per srl item No 24.01 here-in-before but door of book case including CP knob and continues piano type hinges.

Removing old existing unsv legs from book case and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing of old existing unsv back ply of book case and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed (Make - Greenply/Kitply/Century/ Archid Gold)

Removing of old existing unsv lock and S&F of new lock 50mm, 4 lever ( Make - Godrej/Link/Plaza) magnetic catcher to side board as per size and design shown on drg complete all as specified and directed.

Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to side board as per size and design shown on drg complete all as specified and directed.

Removing of old/broken existing glass shutter and S&F complete new glass assembly using 6mm thick glass and aluminium channel as per direction of Engr-In-Charge/GE.

SOFA SET 5 SEATED (TP) - TP

Removing old unsv foam Seat & back cushion of 5 seater and S&F New foam Seat & back cushion of 40 density as appropriate size and shape of existing sofa. (Make : Sleepwell/Kurl-on Goldline /Featherfoam)

Removing old tapesrty cloth/leatherite of 5 seater sofa and S&F new tapestry cloth premium as per sample kept at GE Shillong office and as per existing.

POLISHING OF WOODEN FURNITURE Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge.

Bed Hard - FD-246, 213,245

Chair Dining - FD - 279

Chair dining JCO/Ors - FD/Map-II/05

Chair wooden bottom w/o arms - FD - 285

Chair Writing - FD - 280

Chair Easy - FD-229

Sofa Set 04/05 seater - FD-281,373,258

Side Board - FD-241/372

Peg table - FD-277/384

Teapoy - FD– 382

Table writing - FD-275

Table centre - FD-235/274

Table bed side - DB-395,FD-276

Table Dining 8 Person - FD-273/FD/MAP-II/03

Table Dining 06 Person - FD-273/FD/MAP-II/03

Table Dining 1200 x 900mm - FD-273/FD/MAP-II/03

Table 3'x3' - FD-228/291

Table Office Clerk - DB-4120

Table writing JCO/Med - DB-3948/DB-3982

Table 900x600 mm with Drawer - FD -283

Table 900x600 mm without Drawer - FD -284

Vinayak Distributors

M/S SAMAL CONSTRUCTION

kapoor and co