Special repairs to bldg No P-11 at Domestic Line in RA at CAD Pulgaon

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based crimbed corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by EIC.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparation of wood or wood based new or untreated surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for false ceiling with GI based steel snap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 4mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 8/9 mm thick fixed to steel frame work including Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, including frame of any description and any thickness, fixed in any position . complete all as specified and directed by Engineer-in-Charge.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level.

M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement.complete

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes.

M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as item No (15) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as directed. ( Make Nirali /Prayag/Blue star/Silver Shine)

S & F machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 20mm screed bed CM 1:6. incl demolition complete all as specified and as directed.

Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed.

M and L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed by EIC.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC.

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 30 mm thick factory made glazed skeleton window shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

Supply & Fixing 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified.

S& F 3.50 mm thick sheet figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Harrison rails, anodised aluminium alloy dropry rod including brackets fancy type 02 Nos each rod with fixing brackets, stops, rollers etc

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500 & n exc 1000 Ltr.

S&Fin repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed by Engineer-in-Charge

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

S&F (in repairs) vitreous china squatting pan 'orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. (Make : Hindware/Cera as approved by GE).

S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including 15 mm dia bore fancy type pillar tap , waste coupling, brackets, PVC waste pipe of 32mm, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stop/angle valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

S&F in repairs for Towel Rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail.

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.

S&F for cup board/cabinet hinges full overlay or half overlay type fixed with stainless steel screws complete all as specified and directd

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints.

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement.

M&L for preparing surface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coats of Oil bond Distermper complete all as specified.

M&L for preparing surface of wall priming plastered and other surfaces with white cement priming paint over two coat of cement base paint complete all as specified.

M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over a one coat of wall care putty complete all as specified

M & L Complete removal of existing treatment on old surfaces on walls two cement base paint over a coat of white cement primer including preparation of old surfaces complete all as specified and directed vy Engr in Charge.

Cleaning of sewage line and connected Manholes 100 mm bore dia of pipe any length from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge.

All as per item No 71.00 above, but of 150 mm bore dia of pipes

Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of code red, blue and yellow for phase, black for neutral and green for earth of ISI marked drawn through and including PVC casing caping of suitable size with accessories ISI marked on wall/ceiling including PVC insulated copper cable FRLS 1100 V grade multi stranded for earth continuity conductor of same type and size and connected to earth dolly including provision of MODULAR boxes of suitable size MODULAR boxes,cover plate for mounting switches/sockets and regulators complete all as specified and as directed. (a) One light point controlled by one switch one way

All as per item No 74 above, but One Ceiling fan/ Exhaust fan point controlled by one switch one way

All as per item No 74 here in before but one bell/buzzer point controlled by one push button on the same board with other swiches or independent with 1.5 sqmm size.

All as per item No 74 here in before. But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3/6 pin 6/16 Amp socket outlet controlled by one switch on independend board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed .

M&L Modular switch one way, 6 Amps, 240 V complete all as specified and directed

S&F modular socket outlet 2/3 pin type,6 Amps, 240 V complete all as specified and directed

S&F socket outlet modular but 6A/16A flush,2 module type complete all as specified and as directed.

S&F switch modular 15/16A complete all as specified and as directed.

S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

S&F call bell electrical operated complete all as specified and as directed

S&F fan regulator modular type 120w 2 module complete as specified and directed.

S&F bell switch modular type complete all as specified and directed.

S&F ceiling rose surface type with 3 terminals complete .

Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed

M&L sub main wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in PVC Casing caping of 2 run of 4sqmm PVC FRLS copper cable and 1run of 4sqmm PVC FRLS copper cable for earth wire complete all as specified and directed. Note for sub main wiring :- (i) 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM (ii) Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire

S&F in replacement to LED street light fitting 35 Watt 230 volt AC outdoor type with high pressure die cast housing and heat resistance with complete with driver ,lamp with bracket with impact and corrision resistance including thermal management in multiple optics complete with IP -65/66 protection complete all as specified and directed.

S&F in replacement LED tube light lamp 1 x 18/20 watt ,220 V AC decorative box type with driver , holder including LED tube light connecting up with 3 Core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and directed.

S&F in replacement of MCB SPN 40 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete all as specified and directed.

S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series complete all as specified and directed.

S&F in repairs of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete including blanking plates as required and making good the disturbed surfaces all as specified and as directed.

S&F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA," C " series all as directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed.

Supply and fixing Double wall corrugated High Density POLYMER Ethylene (HDPE) pipe of size 50 mm as per IS 14930 (Part-2):2001, Laid in Trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed HDPE Pipe size 50 mm.( AREA-.00196 CUM)

Excavation in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cables,GI/CI pipe lines etc getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed.

M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil. complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Supply and fix in replacement of 9 watt LED Bulb retrofit type complete all as specified and directed

Material and labour earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nut check nuts and washers of galvanised iron or steel, earth lead protection pipe 15mm bore GI medium grade, watering pipe 20mm bore GI medium grade all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and directed by Engr-in-Charge. Note : (i) The unit rate shall also includes for excavation earth work, type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe from earth test point upto equipment to be earthed, RCc 1:2:4 type B1 cover for earth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways and 6mm dia MS round bars at handles of cover slab all as specified in addition to sl No 1 (a) to (e) and 3 of under sub heading earthing as specified on ser page No 441 of SSR Part-II-2010. (ii) The rate shall be deemed to include for taking out existing earthing complete.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as per IP-65 protection complete all as specified and directed.

Supply and fix exhaust fan steel body AC single phase 230 Volts of size 300mm sweep with blades and frame and louvers complete all as specified and directed including necessary arrangement in wall for fixing the exhaust fan in kitchen including making hole,connection with 1.5 sqmm FRLS cable from near ceiling rose.

Supply and fixing ceiling fans complete with blades, down rods, clamp,and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) hanging complete all as specified and as directed. Note:- Price includes taking out of OLD UNSV fan from site and deposite in E/M store as directed by Engr In charge.

Supply and lay pipe galvanized, “light class”, for pipe prptection 40 mm (2") dia .

M&L for cutting existing GI water mains for branch connections for insertion and including new tee 50/25mm bore for branch connections in position, including jointing, earth work excavation in any type soil complete all as specified & Directed.

Supply and laying in trenches steel tube medium grade with all fitting and fixed complete to wall,tubing and ceiling or laid in floor/trenched of size 25mm (1'') dia

Supply and fixing of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of 25 mm dia.

M&L for construction of brick Masonarry valve pit chamber 750mm x 750mm x 750mm (internal size), 100 mm thick PCC 1:4:8 type D2 lean concrete foundation using 40 mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick build in CM 1:6 rendaring 15mm thick in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 3.5mm thick MS sheet steel cover fixed on 50 x50x6 mm thick angle iron frame embbeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS coats of synthatic enamel paint of approved shade over a coat of primer (Red oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified & Directed.

M/S Maa Durga Constructions,Pulgaon (BID ID -3197268)

M/s Prakash Agencies (BID ID -3196044)

Chhabra Enterprises (BID ID -3195512)

M/s Dara Constructions, Pulgaon (BID ID -3195888)

M/S L M Chourasia (BID ID -3194775)

SHREE CONSTRUCTIONS (BID ID -3195696)

M/S Ramakant Chourasia (BID ID -3198025)

I P Constructions (BID ID -3196297)

RAJ ENTERPRISES (BID ID -3194760)

Bidder Name

M/S L M Chourasia

RAJ ENTERPRISES

SHREE CONSTRUCTIONS

M/S Ramakant Chourasia

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

M/s Prakash Agencies

Chhabra Enterprises

I P Constructions

Laxmi Paper Agencies