General fund - Narikulam Borewell

Amount

Drilling of bore well of size 6" to 8" dia in hard rock formation using hard rock area including inserting of casing pipe, transportation of rig cost of fuel and all labour charges etc complet and as directed by officers concerned

Supply and delivery of following casing pipes confirming to IS Specification with ISI Marking etc complete

180mm pvc plain casing pipe 10ksc

180mm pvc slotted casing pipe 10ksc

Conducting geo physical survey charges

Supply and delivery of following pipes and specials confirming to IS Specification with ISI Marking etc complete

50mm UPVC Column pipe

50mm GM Gate valve

50mm GM Non return valve

50mm GI Elbow

50mm GI Pipe Nipple

50mm GI Coupling

4 sq.mm Submersible cable

90mm pvc pipe 6ksc

80mm GI Pipe 'B' class

Supply and delivery of 5HP submersible pumpset with a duty condition of 150pm discharge against the head of 125m suitable for 150mm dia bore well confirming to IS specification with ISI Marking etc complete

Supply and delivery of wall mounting type control panel board consists of Ammeter, voltmeter, single phase preventer, over load relay and all accessories suitable for 5HP submersible pumpset

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD-36)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) (SD-18)

Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD-68)

Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (SD-73)

Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-166)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD-234)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD-129)

Labour charges for erection of 5HP submersible pumpset in the borewell including fixing and jointing of submersible cable with proper clamps up to starter to the required depth and also fixing of riser pipe to the required depth valves erection clamps pressur gauge up to the exterior wall of the pump room and erection of panel board consists of TPICN switch,ammeter voltmeter three pilot lamps capacitor single phasing preventer water level guard and laying and jointing of cable and TWIN earthing as per IE Rules etc complete and testing the pumpset and trair run for 10 days etc complete

Earth work excavation and depositing on bank withan initial lead and lift in hard stiff clay, stiff black cotton,hard red earth,shales murram, gravel, stoney earth,earth mixed with small size boulders for foundation etc complete

Cement concrete of mix 1:4:8 (one cement four sand eight aggregates) using 40mm gauge hard broken including cost curing etc., complete as per standard specification.

Brick work in cement mortar 1:5 mix using (one cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4")for foundation including curing cost and conveyance of all materials tosite and all labour charges etc.complete as per standard specification -

Supplying and erection steel centering for sides and soffits including supports and strutting upto 3.29m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete

Reinforcement cement concrete 1:1.5:3 mix (one cement one and half sand and three aggragate) using 20mm HBG stone including all cost and conveyance etc complete

Supply and delivery fabrication of MS doors and windows with outer frame and shutter frame in MS angle in MS angle of size 40 mm x 40 mm x 6 mm with MS flat 25 mm x 25 mmx 6 mm and MS sheet of 18 guage including ventilating arrangements using 20 mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of redoxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete (size 1.20mx0.90m)

Plastering in cement mortar 1:4 (one cement four sand) using 12mm thick including cost and conveyance of all materials and labour charges etc,complete as per standard specification.

Painting the new walls two coats over one coat of priming with best emelson paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers

Painting the new iron works with two coats of ready mixed enamel paint over one coat of priming with standard specification and as directed by the department officers

Lettering and Writing of scheme details on side wall of the pump room including all cost and conveyance etc complete

Earth work excavation and depositing on bank with an initial lead and lift in hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth, earth mixed with small size boulders for laying of pipe line including refilling the trench with excavated earth etc. complete

90mm pvc pipe 6ksc

Lowering of following pipes and specials in to trench, laying to proper grade and alignment etc complete.

90mm pvc pipe 6ksc

Labour charges for linking the pipe line with existing main in proper grade and alignment etc complete.

S.P.SUTHA (BID ID -1272333)