Maintenance of Rehabilitation and Upgradation of existing Highway to 2 lane 4 lane with paved shoulder configuration from Dhangarpimpri to Jalna and Ambad chowk to Mantha Chowk Km 30 390 to Km 50 264 and 0 000 to 5 243 two lane with paved shoulder

Charges for groove cutting of 15 mmx15 mm deep along crack and sealing and refilling the same with epoxy mortar including cost of material, labour etc. complete. (SSR Item No.51.143, Page No. 392)

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/colourof 2.5mm thick including 1.5 Refractive index reflectorizing glass beads @250gm/sqm. Thickness of 2.5mm is exclusive of surface applied glass bead s as per IRC35:2015. Initial Dry reflectivity RLshall be>250mcd/sqm/lux measured in the initial 7days and sustained reflectivity RL of 100mcd/sqm/luxandQd of 100mcd/sqm/lux measured at the end of 2 years by means of a S tandard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL &Q D both according to IRC35:2015 clause15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(ReferMORTH Clause803 for technical Specification and Performance for IRC 35:2015). (SSR No.6.12a, MORTH 803.4, Page No.48)

Replacement of existing damaged Expansion joints by providing and laying of Strip Seal Expansion Joint System, including removal of existing damaged exp joints by dismantling of deck slab, wearing coat etc. and back filling of the recess up to final finish level with conc of grade M-35, complete as per M.O.R. T&H specification. ( Item No.51.152, Page No.393)

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No.6.09, MORTH 804, Page No.47)

Repair of localized failed areas of PQC by marking the area, removing the failed area using jack hammer,saw cutting to full depth of PQC,replacing membrane,clearing the area of from dust and debries,placing M40 grade PQC in a depth equivalent to the existing depth of PQC and installing existing expansion joint/other joint. ( Item No.5.09, Page No.41)

Stapling as per specifications and standards defined in IRC SP:83-2018

Street Light fitting repair - A Testing of street light fitting, replacement of faulty accessories, doing fitting connections as before and testing and starting of fitting of fitting. Spares will be provided by PMC or removing of street light fitting safely & handling over all the accessories to PMC. (Region : PMC Electrical DSR YEAR : 2023-2024 Category : POLE MAINTENANCE)

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) (SSR Item No.16-3-3, Page No.239)

Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5 x 3.65 x 3.25 mm thickness (5+2+2 m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 113 kg) as per specification no. OH-PL/STP. (SSR Item No 8-1-3, Page No.146)

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FGBKT/BPC. (SSR Item No.2-7-6, Page No.32)

Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V, 150 W SON type . (SSR Item No.2-8-16, Page No.35)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3.1/2 core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (SSR Item No.7-2-21, Page No.131)

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 00 to 1.5m.) By Manual Means (SSR Item No.21.01 Page No.153)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complet (SSR Item No.21.40 Page No.157)

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them ifspecial finish is to be provided, finishing if required and curing complete, with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI grade) (SSR Item No.24.01 Page No.175)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete (SSR Item No.21.37 Page No.157)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks incement mortar 1:6 in plinth as backing in composite masonry including bailing out watermanually, striking joints, raking out joints and watering etc Complete (SSR Item No.27.03 Page No.197)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks incement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR Item No.27.05 Page No.197)

Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcemen tof 2 bar so f 6 mm diameter/2hoopironstrips 25mm X1.6 mm placed at every third course, properly bent and bonded at end sscaffolding, racking out joints and watering etc.complete .(SSR Item No.27.06 Page No.197)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailingout water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcementand structural steel) etc. complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No.25.11 Page No.178)

Providing and laying Cast in situ/Ready Mixcementconcrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing oras directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. mplete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No.25.31 Page No.179) (For Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No. 25.50 Page No.181) (For Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No. 25.70 Page No.182) (For Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for R.C.C. Waistslab, and steps of stair cases etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No.26.26 Page No.186)

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No.26.05 Page No.184)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR Item No.26.05 Page No.184) (For Ground Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete (SSR Item No.32.11 Page No.209) (For Ground Floor)

Providing internal cement plaster 12mm thick in single coat in cement mo

rtar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR Item No.32.04 Page No.209) (For Ground Floor)

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. Complete (SSR Item No.32.15 Page No.210)

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. (SSR Item No.32.21 Page No.210)

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (SSR Item No.33.40 Page No.217)

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete(SSR Item No.33.24 Page No.215)

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.(SSR Item No.33.25 Page No.215)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (SSR Item No.33.68 Page No.220)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete (SSR Item No.40.01 Page No.264)

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at eight 0.933 Kilogram/Running metre. With powder coating with box (SSR Item No. 39.43 Page No.254)

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick Other hardwares (SSR Item No.39.47 Page No.255)

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete (SSR Item No.36.14 Page No.228)

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete (SSR Item No.35.15 Page No.224)

Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). (SSR Item No.35.04 Page No.223)

Providing and fixing Orissa type white glazed arthenware water closet pan of size 260mm x440 mm x580 mm with approved make Slimwall hung cistern with installation kit including Sor P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. (SSR Item No.48.42 Page No.316)

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillartap/cold and hot water pillar tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections including P.V.C.waste pipe and trapup totheoutside faceof thewall.Makinggood the damaged surface, testingetc. complete (SSR Item No.41.63 Page No.272)

Providing and fixing push cock (Self closing tap) symet type of 15 mm dia. including necessary socket, testing etc. complete (SSR Item No.41.54 Page No.271)

Providing, laying and fixing P.V.C. pipe of 15 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Includingremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.21 Page No.276)

Providing, laying and fixingP.V.C. pipe of 20 mm dia. with fittings such as bends, tees, reducers, clamps, etc. includingnecessaryexcavation, trenchfillingetc. complete. Includingremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.22 Page No.276)

Providing, laying and fixing P.V.C. pipe of 25 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Includingremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete (SSR Item No.42.23 Page No.276)

Providing and fixing H.D.P container one piece moulded water tankmadeout of high density polythyler and built corrugate dinclusive of delivery upto destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No.42.53 Page No.280)

Providing and fixingonwalls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portionetc.complete. Includingr emoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.89 Page No.284)

Providing and fixingon walls/ceiling/floor 20 mmdia. uPVCpipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking thes ame in PWD chowkyor as directed etc. complete. (SSR Item No.42.90 Page No.284)

Providing, layingand fixing P.V.C.pipeof 110 mm.dia.with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.28 Page No.277)

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundG.S.W.pipes,Brick Masonry,plastering from inside and with frame fixedin cement concrete with R.C.C. Cover medium duty 140 Kilo

gram with frame etc complete. (SSR Item No.42.12 Page No.275)

Providing and fixing push cock (Self closing tap) symet type of 20 mm dia. including necessary socket, testing etc. complete. (SSR Item No.41.55 Page No.271)

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. (SSR Item No.42.80 Page No.282)

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing (SSR Item No.51.21 Page No.355)

Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal int 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate.(SSR Item No.51.55 Page No.366)

Providing a folding wheelchair of Pioneer Surgicals Brand, model One Number PS 809/ equivalent make as per the directions of the engineer in charge. (SSR Item No.51.82 Page No.372)

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish (SSR Item No.51.44 Page No.359)

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT (SSR Item No.51.41 Page No.359)

Providing & Arrangemnt of Mid Back, ECOCTS Mechanism,FixedArmrest ,Gasliftfor Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery (SSR Item No.51.43 Page No.359)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 0.00 to 1.50 m.) By Manual Means (SSR Item No.21.01 Page No.153)

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50metres beyond the building are and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means (SSR Item No.21.03 Page No.153)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven dhoney combed surface and curing etc. complete. The Cement Mortar 1:3plaster is considered or endering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item NO.24.04 Page NO.175)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No.25.11 Page No.178)