PROVISION OF HARD STANDING AND INTERLOCKING TILES NEAR N17 JETTY, PROVISION OF ALUMINIUM PARTITION OF MIS, R AND D CELL CONTROL ROOM, INTERNAL ROOM AND STORE ROOM OF SMU (V), PROVISION OF DEFICIENT 3 PHASE POWER SUPPLY AT G 1 BUILDING (FSTC) ADJACENT

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

Surface excavation n.exe 30 cm deep and averaging 15cm deep (hard/dense soil) and getting out disposing off side MD land complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge not exc 63mm depositeed spread and leveled in layers not exc 15cm thick watered rammed to true surface complete all as specified and directed.

M&L for moorum filling /red bajari filling in floor or paving etc. laid in layers n exc 15 cm thick, spread leveled and rammed including watering complete all as specified and directed.

M&L for mild steel bars TMT 10mm dia and over cut to length, bent to shape required including binding with and incl mild steel wire (annealed) not less than .90mm dia complete all as specified and directed.

M&L for using reinforced cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) (Nominal mix) as in foundation and mass concrete uses as in floors and similar works including necessary formwork complete all as specified and directed.

M&L for sand filling under floor including watering consolidation complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block with grey cement and pigment any shape and size of 80mm thickness , M-40 graded laid over sand cushioning complete all as specified and directed.

M&L for precast cement concrete type 1:3:6, type C-1(using 20mm graded stone aggregate) block masonary with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work for concrete surface and finished even smooth without using extra cement complete all as specified and directed.

M&L for prepartion of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) for string courses, coping, kneeling, apex stone, bed plates, kerbs, water through and the like including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and from premises and removing the debris outside from the Dockyard premises complete all as specified and directed.

M&L for 25mm thick cement concrete type 'B-0' 1:2:4 using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.

M&L for dark shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement mortor (1:6) screed bed complete all as specified and directed.

M&L for partiotion walls ( panels of Approx 1.44 Sqm(appx)) made outof alluminium anodised standard hollow sections of tsandard size section weight not less than 1.4 kg per RM thick including all necessary fixing arrangements , 5.5mm thick glass and 12mm thick particle board including all ncessary snap beadings and S&F of Alluminum doors where ever required including all necessary fixing arrangemnts and locking system with two no of Keys all as specfied and as directed

M&L for prepration of old surfaces of wall and applying two coats oil bound distemper complete all as specifed and directed

[SCHEDULE 'A' PART-II [E/M WORKS]

Excavation in trenches n.exc 1.5M wide and n.exc 1.5m in depth and getting out in soft loose soil all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft disintegrated rock (considered for road cutting) all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing of excavated material n.exc 50m and depositing where directed at a level not exc 1.5M above the starting point all specified and directed.

M&L for type B1 1:2:4, using 20mm graded stone agregrate for pole coping / road / drain / path against damage due to excavation/laying of cable complete all as specified and directed.

Supply and laying GI pipe heavy duty of size 100mm passing through trench/road complete all as specified and as directed.

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Supply, installation, testing and commissioning of floor mounted cubical/trunk type Outdoor LT panel made out of 3 mm thick CRCA steel sheet traded and powder coated, prewired, factory made , with provision for one incoming and multiple outgoing as mentioned below, with suitable CT's, individual comparment dust and vermin proof, weather proof electrical panel and with Godrej type lock, cable glands etc. and consisting of the following all as specified and as directed :- (i) Electrolytic aluminium Bus bar of capacity 800 Amps for phases and neutral. (ii) MCCB 400 Amps 4 pole 36KA as incommer-01 Nos. (iii) MCCB 160 Amps 3 pole 36 kA -02 Nos out going

(iv) MCCB 100 Amps three pole breaking capacity 16 kA -03 Nos as out going (v) Digital Ammeter 0-2000 Amps-02 Nos . (vi) Digital voltmeter 0-500 Volts-02 Nos . (viii) Indication lamps RYB -03 sets. Note : (i) Drawing for LT panel showing layout of incoming and outgoing switch gear with capacity before errection shall be approved by Engr-in-Charge. (ii) Unit rate quoted include for necessary grouting / chipping of concrete and Anchor fastners and providing necessary PCC foundation to fix the LT Panel enclosure.(iii) Quoted rate are Inclusive of aluminum Bus bar and MCCB.

Supplying and laying synthetic rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m all as specified and directed.

Supply, laying and connecting up through surface/wall/duct/cable tray, cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with straded aluminium conductor of size 240 sqmm 3.5 core including necessary lux complete all as specified and directed.

Supply and fixing (white) ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote complete all as specified and as directed. Make :- Havells/Bajaj/Crompton

Supply & fixing of U shaped hook to the ceiling with safety chain necessary fastners and making good with cementing and white washing with existing colour to the ceiling complete all as specified and as directed.

M&L for approved quality sand underneath and all around the underground cable in trenches for cable cushioning complete all as specified and directed. Note :- Punned thickness only will be measured for the purpose of payment.

SATYAMEGHA ENGINEERS (BID ID -3116760)

SRI SIMHADRI COMPANY (BID ID -3128474)

UNITY PROJEKTZ (BID ID -3116871)