Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC D 154 ADARSH NAGAR NARMADA ROAD JABALPUR 482001 M P | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹38.7 L+₹2.1 L (5.75%)Rejected-Finance HOUSE NO E 1 PANCHSHEEL NAGAR NARMADA ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹39.9 L+₹3.4 L (9.19%)Rejected-Finance 44 EKTA NAGAR MP 4 ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L3 | Rejected-Finance Other than L1 | |
| 4 | L3₹41.2 L+₹4.7 L (12.8%)Rejected-Finance HDLX 31 JASUJA CITY JABALPUR MP 482003 | JABALPUR | MADHYA PRADESH | 482003 | L3 | Rejected-Finance Other than L1 | |
| 5 | L4₹42.4 L+₹5.9 L (16.1%)Rejected-Finance 1814 NARSING NAGAR RANJHI JABALPUR MP 482005 | JABALPUR | JABALPUR | MADHYA PRADESH | 482005 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹49.5 L
EMD Value
₹98,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
PROVN OF CERTAIN REVENUE, LBW AND MINOR WORK IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR
2022_MES_566058_1
8525/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹98,000
6 Jan 2023
29 Nov 2022
30 Dec 2022
29 Nov 2022
27 Dec 2022
13 Dec 2022
30 Nov 2022 - 8 Dec 2022
Amount
Demolition of Unreinforced Cement Concrete in ground floors and Pavings exceeding 15cm thick [below or above ground level] complete all as specified and as directed.
Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete article 5.50+3.00
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed. 100+132+40+285
Excavation over areas not exceeding 1.50 m in depth and getting out in Soft / Loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil as in foundations, laying pipes, cables, etc. complete all as specified and as directed. 22.00+3.00+5.00
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. 8+2+18
Excavation in post holes each not exceeding 0.5 Cu.m, getting out in Soft / Loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. 20+8+12+20+14+6+42
M & L for Sand filling as in under floors, foundations, below the interlocking paver block including watering and consolidation complete all as specified and as directed 5+6.60+2+21.25+7.125
Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. 14+15+19.8+6
Removal of excavated material [Soil] to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed. 3.00+31.88
M & L for hardcore of gauge exceeding 63 mm but not exceeding 100mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.
M & L for moorum/ red bajri filling under floors laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.
M & L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.
M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. 1.00+42.50
M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. 4.32+0.96+2.4+2.4+1.68+6.30
M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 1.00+0.50+1.00
M&L for Cement concrete Type B2, 1:2:4 using 40 mm graded stone aggregate as in grouting of post complete all as specified and directed.
M & L for PCC 1:2:4, Type B-0, using 12.5 mm graded stone aggregate as in Roof kerbs, Coving etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 0.50+0.75
M & L for Pre-cast cement concrete block masonry using PCC, 1:2:4, Type B-1 solid blocks, exceeding 10 cm in width and setting in Cement Mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.
M & L for RCC 1:2:4, Type B1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. 1.00+1.20
M & L for RCC 1:2:4, Type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. 0.75+1.50
M & L for RCC 1:2:4, Type B1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed. 1.21+1.00
M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. 5+5.25+22.20
M & L for brick work with with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.
M & L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Use and waste of form work to sides of concrete foundation, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter; for rough finished surfaces complete all as specified and as directed. 31+4.50
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs complete all as specified and directed.
Use and waste of form work to sides of pillars, posts, struts, piers, columns of any shape/ cross section for fair finished surfaces of concrete complete all as specified and as directed. 8+12.50
S & F second class hard wood plain, fillets, square, rectangular or triangular in section, wrought, secured with screws, cross sectional area exceeding 3 Sq.cm and not exceeding 6 Sq.cm complete all as specified and as directed.
S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.
S & F Aluminium anodised barrel Tower Bolt of size 75 mm size of extruded section complete all as specified and as directed.
S & F 75 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed.
S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 100mm long complete all as specified and as directed.
S & F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F Aluminium Anodised Powder Coated [Minimum thickness of Powder Coating 50 Micron] Shutter as in doors, windows, ventilators, etc; Aluminium sections weighing not less than 0.55 Kg/m including glazing clips, jointing cleats, rubber neoprene packing, butt hinges, etc., complete all as specified.
S & F Floor Door Stopper of size 40-50 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
S&F Stainless steel wire cloth, 0.50mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or SS staples complete all as specified and as directed.
S & F Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
S & F Mortice Lock, Vertical type of size 100 mm, 4 Levers of Godrej Make or equivalent, complete all as specified and as directed.
S & F 300mm chromium plated handle with necessary fitting & accessories complete all as specified and as directed.
S & F stainless steel telescopic channel of best quality available in the market supplied and fixed to aluminium frame complete all as specified as directed.
S & F Magnetic catches with PVC body and MS plate and striking plate including letting in and fixed complete all as specified and directed.
S & F Mild steel flat Iron as in wind ties fixed in roofs with necessary bolts, nuts, washers, etc and including drilling holes complete all as specified and as directed. 20+40+40+90+50+15+110
S&F mild steel posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed. 636.72+95.00+280
S & F Mild steel framed work conforming to Fe 290 (Gde-E-165) such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. 1664+42
S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut not exceeding 5 cm long, dia of neck exceeding 5 mm but not exceeding 10 mm complete all as specified and as directed.
M&L reinforcement using TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 540+193
M&L reinforcement using TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 90+105
M & L for joist, channel, angle, or tee sections, fixed independently, without connecting plates etc [cut to ordinary lengths i.e. within 20mm of the length indicated] complete all as specified and as directed.
M & L for plates [plain & chequered], channels, angles of grade Fe - 410 - S square cut or notched [ordinary or counter sunk] forming holes with welded attachment complete all as specified and as directed. 95+70+95
M & L for rolled mild steel framed work conforming to Fe 410-w (Grade E-250) as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, fastening and fixing complete all as specified and as directed. 115+345
S & F rolled mild steel work as in tubular trusses, posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, medium grade of any dia complete all as specified and as directed. 700+745+1421+1450+1450+167+1300
S&F Expanded metal not exc 4 kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples to wood or steel members complete all as specified and directed.
S & F galvanised, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S & F Aluminium Anodised Powder Coated [Minimum 50 Micron thick] Sections as in Door Shutters, windows, ventilators, partitions, etc: and including necessary Joining Cleats for fixing, etc., complete all as specified and as directed.
M & L for Powder Coated aluminium frame 2/3 track for pre laminated partition board with one or more rebated including jointing cleat for fixing including fixing to wall including making good to all disturbed portion complete all as specified (minimum thickness of powder coating 50 micron)
S&F Stainless steel wire cloth, 0.63mm nominal dia of wire average width of aperture 1.40mm and fixed with tinned tacks, or SS staples complete all as specified and as directed. (Note : The rate quoted by the tenderer is deemed to be included for execution of above item for upto and including triple story of the building.)
M & L for 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc complete all as specified and as directed. 40+60+80+130+132+110+45+285
S&F, Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. 8+5
M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmX8cm at the junction of roofing to vertical surface etc complete all as specified and as directed.
M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.
S&F Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work 12mm thick (as in shelves) built in cup boards / partitions and CB shutters etc including beading complete all as specified.
M&L for machine cut Kota stone slab flooring, 20-25 mm thick over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be roundedcomplete all as specified and directed.
M&L for Granite slab as in skirting, dado, jambs, cladding to columns, window cills, cooking platform and like,etc., 18-20mm thick, machine cut, machine polished, bedded over and including 10mm thick screed bed or bedding layer of CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and as directed. Note : Shade and colour shall be as directed by Engineer-in-charge.
M & L for 75mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Plinth protection etc surface finished even and fair complete all as specified and as directed.
M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed. 30+100+132+40+285
M & L for glazed ceramic tiles, coloured, first quality, of size 350x250x7mm / 450x350x7mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, finished with flush pointing in white cement or coloured cement to match, and including over 10mm thick CM 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, etc., complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.
M & L for non skid ceramic tiles, coloured, of area exceeding 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floors etc, over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for 60mm thick, coloured, rubber moulded, M 35 grade, Machine pressed precast concrete interlocking paver block of any shape and size jointed and pointed with grey cement and no pigment, confirming to IS 15658-2006, complete all as specified and as directed. 100+132+40+425+285
M & L for cement concrete tiles, out door, coloured tiles, rubber moulded, 300 mm X 300 mm X 10 mm thick, set, jointed in neat cement slurry and pointed in white cement and pigments to match the colour of tiles over and including 15mm thick screed bed and bedding layer in CM 1:6 complete all as specified and as directed. Make-H & R Johnson, Brand-Endura designer digital series or equivalent make
M & L for 5mm thick plaster in cement mortar 1:4 mixed with water proofing compound over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including finishing the top coat even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be deemed to be included in the rate quoted by the tenderer.
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished fair and even complete all as specified and as directed. 121+20+88
M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.
M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. 88+20+121+50
M & L for preparing newly plastered wall surfaces and applying two or more coats of Cement based Wall Care Putty of make JK / Birla / Jenson & Nicholson on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of chalk whitning on walls complete all as specified and as directed.
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. (Note : The rate quoted by the tenderer is deemed to be included for execution of above item for upto and including triple story of the building.) 2+7.2
S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
S & F 12 mm thick toughned glass plain / designing pattern as directed by GE including all necessory accessories for fitting door/window/partion complete all as specified and as directed.
M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 50+250
M & L for two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces not exceeding 10cm width or girth including preparation of surfaces complete all as specified and as directed. 38.40+17.50
M & L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. 5+64+20+25+25+40+5+40+85
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches/ floor, fixed to walls including necessary brackets clamps complete all as specified and as directed.
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches/ floor, fixed to walls, fixed to walls including necessary brackets clamps; complete all as specified and as directed.
S & F 110 mm bore PVC [SWR] Bends of any radius complete all as specified and as directed.
S & F 75 mm bore PVC [SWR] Bends of any radius complete all as specified and as directed.
PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.
PVC (SWR) 75mm bore 'T' equal or unequal complete all as specified and directed.
S & F Vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, CP screws etc complete all as specified and as directed.
ELITE ENGINEERING COMPANY
kamakshi construction
ANAMIKA CONSTRUCTION
TRISHLA CONSTRUCTIONS
Arpit dixit construction
charanjeet singh
Kirti Chandeliya and Assosicates
a k builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .