SPL REPAIR/REPLACEMENT OF LT/HT UG CABLE AND OTHER ALLIED WKS AT MORAR CANTT, GWALIOR

Amount

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and directed.

M&L for Sub class 'B' bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified and directed.

Dismantling existing PCC & Steel Poles/ struts, any size including necessary excavation demolition of concrete and removing the old unserviceable rubbish etc complete all as specified and directed.

Dismantling of cross arms of MS channel or angle iron sections etc complete and setting aside complete all as specified and directed.

Dismantling of insulators any type any size complete all as specified and directed.

BLANK

Dismantling ACSR conductor of size 6/1/2.59 from existing overhead service feeder etc all as specified and directed.

Dismantling air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism for repair/replacement of broken/worn out components and insulators etc. or carrying to MES store (spare/ components for replacement to be provided free by department) complete all as specified and directed.

M & L for switch air break gang operated triple pole out door type with drop out switch fuse unit on HT 11 KV 50 cycle AC suitable for current rating upto 200 Amps mechanically operated mounted on insulators (12 Nos epoxy insulators) and frame with operating mechanism worked from ground level with earth switch and including locking arrangement complete all as specified and directed.

Fixing only of ACSR conductor of any size on existing or new poles complete incl restringing, jointing &binding etc retrieved against above said item complete all as specified and directed.

Fixing only of cross arm of any size on existing or new poles complete after drilling, cutting, scrabbing & 2 coat of aluminium painting etc retrieved against above said item complete all as specified and directed.

Supply & Fix HT SFU of 11 kv LBSF panel outdoor complete with, 630-A Load break switch, 200-A D.O.set, Earth switch,Pvc sleeved copper bus- bar for Incoming, Door Interlocking mechanism, Tripping mechanism, Epoxy insulator for bus supports, H. V. cable box provided, For end termination at incoming side, End plate , Provided at outgoing side for end termination etc complete all as specified and directed.

M & L for lightening arresters expulsion type 11 KV grade complete with all fittings, transmission class, discharge capacity 65 Kilo Amps complete all as specified and directed.

M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and directed.

S&F disc type Insulator (single disc assembly) porcelain vitreous, white brown or green 145 mm height and 255 mm dia ball and socket type with tension clamp galvanized iron nut for conductors working pressure 11000 volt grade complete all as specified and directed.

S&F Insulator pin type epoxy insulators vitreous, white brown or green including one galvanized mild steel spindle, two galvanized washers and one galvanized iron nut for conductor working pressure 11000 volt grade complete all as specified and directed.

M&L for fixing of ACSR conductor size 6/1/2.59 on existing or new poles complete all as specified and directed.

M&L for loop type insulator, vitreous porcelain white ,brown or green large size over all dimension 90 X 140mm, clearance of the hole 25.5mm for stay assembly complete all as specified and directed.

M&L for stay assembly with 20mm dia rod complete with accessories as shown in electrical plate No 1 (Loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and directed.

M & L for galvanized steel wire with 4 mm dia as in cradle guard including dismantling old unserviceable cradle guard complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized strip of 32 x 6mm mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete.

M & L for pole LT/HT painting surfaces of any description steel, iron etc . After preparation of old surface of poles including pole fittings such as cross arms of any description, anti-climbing devices, nut, bolts etc. incl scrapping and rubbing etc and applying two coats of aluminum paint providing including numbering of poles complete all as specified and directed.

Taking out un-serviceable/faulty cable of any grade / type / class of size of 16 Sq mm to 50 Sq mm 4 core /3.5 core / core for repair / replacement from pole / wall / cable duct under ground trench etc from site of work all as specified and directed. (Note- Excavation and earth work shall be measured and paid separately)

All as per item No-27 above but size ranging from 95 sqmm 3 core/3.5core LT/HT cable all as specified and directed. (Note- Excavation and earth work shall be measured and paid separately)

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminiium conductor, 11000 volts grade cross sectional area 95 sq. mm 3 Core earthed complete all as specified and directed.

Supply, laying, jointing and testing, XLPE insulated, armoured,heavy duty, electric LT UG cable with multi stranded aluminium conductor, 1100 Volts grade, of size 3.5 core 95 Sqmm complete all as specified and directed.

All as per item No 30 but 50 Sqmm 3.5 core complete all as specified and directed.

All as per item No 30 but 35 Sqmm 3.5 core complete all as specified and directed.

All as per item No 30 but 25 Sqmm 3.5 core complete all as specified and directed.

All as per item No 30 but 16 Sqmm 4 core complete all as specified and directed.

Cable joining kit for LT cable for outdoor termination heat shink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 sqmm

Cable joining kit for LT cable for outdoor termination/ straight through heat shink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 150 sqmm complete all as specified and directed.

Cable joining kit for 11 KV (Earthed) grade cable for straight termination heat shrink type joint complete with joining material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm including testing after jointing complete all as specified & directed.

M & L for cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for set of three core XLPE aluminium conductor cable of size 95 sqmm including testing after jointing complete all as specified & directed

Dismantling the existing worn out jumpers of two pole/four pole structure and replacing with new set of jumpers of ACSR Conductor of size 6/1x2.59 from overhead line to AB switch, edge fuse and transformer incl PVC RYB sleeves aluminium thimbles etc complete all as specified and directed.

M&L for vice type connectors consisting of two brass plates, and two steel bolts and nuts for 2 conductors of equal or unequal sizes for non-tension connections including treatment of connector and ACSR conductor with conductor jolly of size 10 to 13 mm complete all as specified and directed.

Restringing and stretching of existing sagged LT/HT ACSR conductor of any size on OH electric line of any length on existing poles after disconnection of binding wires (dismantling & taking down) service connection etc and making, binding and service connection complete all as specified and directed.

M & L for overhead line spacers/separators made of cpvc 1/2" SDR 11 pipe, 300 mm long fixed with MS shade/clamp at both end of fixing the ACSR conductors complete fixing with insulators as per sample incl taking down old unsv one all as specified and directed.

M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 100 mm dia all as specified and directed.

All as per item No 43 but of size 80 mm dia complete all as specified and directed.

M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) including painting of pole 1.2 RM height from top of coping of the pole and writing the pole no complete all as specified and directed.

M&L for HT/LT cable route indicator precast made from PCC 1:3:6 of size 600mm x 230mm x 100 including excavation PCC for foundation and painting and writing as "11 kv cable" incl preparation of surfaces both sides all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenches technology using ultra sound technique upto 5 mtr below from the ground surface and necessary machine including HDPE pipe of 100mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded BT stone aggregate as in bed block for hold fast or coping including necessary form work complete all as specified and directed.

M & L in replacement of MCCBs 400 Amps, 415 volts, 4 pole rupturing capacity 36 KA in existing LT panel including making existing electrical connection as per existing system all as specified and directed.

All as per item No 52 above but of capacity 250 Amps complete all as specified and directed.

All as per item No 52 above but of capacity 200 Amps complete all as specified and directed.

All as per item No 52 above but of capacity 160 Amps complete all as specified and directed.

Taking out existing street light connection, bracket, jnunction box etc and refixing the same as previous condition and restore the street light connection and testing complete all as specified and directed.

M/s Sagar Construction

PRADEEP SISODIYA

M/s Tirupati construction

M/S SANTOSH CONSTRUCTION CO

BHARADWAJ BROTHERS

anand enterprises