SOPD-G for the year 2019-20

Amount

Road Works

Scarifying existing Bituminous Surface to a Depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as Technical spefication clause 301.4

WBM Gradding 3: Using stone screening Tybe B 11.2mm for Gr-III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN stages to proper grade and camber, applying and bromming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification clauses 405. (A) By Manual Means

Prime Coat Low Porosity: Providing, and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base includign cleaning of road surface and spraying primer at the rate 0.70 -1.0 Kg/sqm using mechanical means as per Technical specification clause 502

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 Kg per swm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical specification Clause 503.

Semi - Dense Bituminous Concrete : Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finidhrt with sensor control to the reqd. grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 508. complete in all respec. With hydrated lime / cement as filler (refer table 500-9 of MoSRT & H Specification) for grading II (10mm nominal size)

Taffic Sign: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulaed lens type reflective sheeting vide Clause 1701.2.3. fixed over aluminium sheeting 2mm thick area not exceeding 0.9sqm supported on a mild steel single iron post 75mm x 75mm 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing and technical specification clause 1701.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulaed lens type reflective sheeting vide Clause 1701.2.3. fixed over aluminium sheeting 2mm thick with area not exceding 0.9 sqm supported on a mild steel single angle iron post 75x 75x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x 450x 600mm, 600mm below ground level as per approved drawing and Technical Specification Clause 1701.

Providing and laying of hot applied thermoplastic compund 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from steaks and holes and conforming to the MoSHT & H specifications

Planting of Trees and their Maintenance for one year (Planting of trees by the road side (Avenue trees) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the tranches, watering, fixing the tree guatrd and maintaining the plants for one year.

m/s shiva harlalka