REPAIR TO FENCING GATE, COMPOUND WALL AND STORM WATER DRAIN AND RCC MS GRILL COVERS AT RS COLABA UNDER AGE BRII OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engineer in charge

M & L Brickwork with subclass ‘B’ bricks, old size straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L for stone masonry (Granite or Trap stone) random rubble, uncoursed well bounded laid in boundary walls incl bedding & pointing in CM 1:6 all as specified.

M&L for precast cement concrete bonders, as through stone of PCC 1:3:6 Type C1 20mm graded stone aggregate and set in CM 1:6 complete with joints to match all as specified.

M&L for Keyed pointing for RR uncoursed stone masonry in CM 1:4

Demolition of cement concrete (unreinforced) in ground floors & paving not exceeding 15 cm thick below & above Ground level complete all as specified & directed by Engineer in charge

M&L Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating as directed complete

Taking down cement plaster of any description etc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified & directed by Engineer in charge

M & L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall smooth finished surface etc complete.

M & L two coats of acrylic emulsion exterior grade (100%Acrylic) one coat of acrylic primer including Preparation of new plastered surfaces of walls etc all as specified.

M&L preparation of old decorated surfaces of wall including washing and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer in charge

Dismantling posts or struts (wood,steel or RCC) any section embedded in concrete, including taking out embedded portion and making good disturbed ground all complete as directed.

Dismantling fencing /wire mesh of any description all complete as directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixedwith earth around, in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in hard/dense soil.

M&L PCC type D-2 1:4:8 (40mm graded stone aggregate) in foundation, filling etc

S&F including fabrication framed work MS flats/ angles Iron as MS grills/Posts for chain link fencing. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165.

Supply only Chain link fencing of MS galvanised fencing,any size or type as directed by Engr-in-Charge.

Fixing only chain link fencing including line wire, any mesh,size and type to any type of standards,rails,straining bolts,etc. Includung provision of binding wire all complete as directed.(Note:- MS flats and MS bar to be measured and paid separetely).

M & L for preparation of New steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified and directed.

Removing excavated/ demolished materials outside MD land to a distance exc 5Km but n exc 10Km.

Demolition of cement concerete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engineer in charge.

M & L reinforced cement concrete 1:1.5:3 type A1 using 20mm graded stone aggregate in slabs supported on walls with fair finished top surfaces.

M&L for precast RCC slabs 1:2:4 type B1 (using 20mm graded stone aggregates) such as manhole cover and similar articles with plain fair faces, including chamfers, weatherings, throating etc. and setting in in CM 1:4 all as directed

M&L for steel formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick horizontal rough finished surface complete all as specified and directed

M&L for steel formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surface complete all as specified.

S&F MS TMT bars 10 mm dia and above cut to length, bend to shape required including cranking and bending, spirally hooking ends and binding with & including mild steel wire (annealed) not less than 0.90 mm dia all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed.

M&L for PCC type D2, 1:4:8 using (40 mm graded stone aggregate) in sub floors, sub-base, floors and paving, plinth protection etc complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

M&L for average 50mm thick compacted thickness sand layer/bedding for interlocking paver block including levelling, compacting etc all as specified and directed.

M&L for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

M & L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles all as specified.

Supplying & fixing Framed work such as grills, gratings,plane or chequered plates etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

S & F Rolled Mild Steel Framed work as in plates (plain or chequered) for drain/manhole cover square cut or notched forming holes conforming to Fe 290 E 165 complete.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out Hard/ den-se soil

All as per item No 37.00 above but exc.1.50m and n.exc. 3.00m depth.

M & L hardcore of gauge n exc. 63 mm, deposited, spread and le-velled in layers n exc. 15 cm thick, watered and rammed to a true surface

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm.

M&L for precast cement concrete block masonary with solid block of grade (C-5) having block density not less than 1800 Kg/cum, exc. 10cm in width and setting in CM 1:6, complete all as specified and directed.

Systematicaly cleaning and desilting of pipe sewers upto 150mm dia including man holes and gully trap of any size and depth by passing knots , bamboo, kamti and disc of required size , pumping out liquid waste / sewage , plugging diverting the flow in the drain , if necessary and stacking the removed silt / sludge in deposits as directed including taking precautionary measures such as safty belts, dry cells , torch for lighting in side the manholes and drain etc, sprinkling bleaching powder on the silt / sludge removed to avoid bad smell and disposal of silt out side MD land complete all as specified and directed.

All as per item No 42.00 above but dia exc 150mm.

Cleaning existing drainage / culverts/manholes up to 1.50m depth including removing cover slabs , soils , spoils , vegetation , silt etc and refixing cover slabs including making good in cement mortar 1: 6 and removing material outside the MD land exc. 5 Km but n. exc 10 Km complete all as directed and specified.

All as per item No 44.00 above but exc.1.50m and n.exc. 3.00m depth.

Cleaning the blockage in Floor trap, Nahani trap, Gully trap, WC "P" trap or "S" trap and making good damaged cement joints , dia of pipe n. exc 150 mm upto 4th floor all as required .

All as per item No 46.00 above but from 5th to 8th floor.

All as per item No 46.00 above but from 9th to 12th floor.

All as per item No 46.00 above but from 13th floor and above.

S&F in repairs cleaning eye (oval access door) for bends , branchs, sections etc of dia n. exc.100mm at any floor level.

M&L for CI 75mm dia Nahani trap with grating including jointing to waste pipe fixed in repairs complete all as specified and directed by the Engineer-in-charge.

Demolition and breaking up drain pipe 150/200mm dia (SGSW, AC or RCC )set in cement mortar.

Demolition and breaking up drain pipe 300/450mm dia (SGSW, AC or RCC)set in cement mortar.

M & L for 150mm internal dia salt glazed stone-ware drain pipe Grade'A' laid in trenches and jointed complete all as specified and directed.

M & L for RCC drain pipes,150 mm dia conforming to class NP3, laid in trenches and jointed with collar as specified.

M & L for RCC drain pipes, 200 mm dia conforming to class NP3, laid in trenches and jointed with collar as specified.

M & L for RCC drain pipes, 300 mm dia conforming to class NP3, laid in trenches and jointed with collar as specified.

M & L Reinforced concrete pipes bore of pipe 450 mm, class NP2, laid and jointed complete with collars

M&L PCC Type C2 1:3:6 (40mm graded agg) in foundation & concrete bed to drain pipes including packing all as specified .

satguruenterprises

SRI SAIRAM COUNSTRUCTION

M/s Qureshi Construction Co

BA Enterprises