Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.0 LAccepted-AOC NANDAN DAMUA CHHINDWARA M P 480555 | CHHINDWARA | CHHINDWARA | MADHYA PRADESH | 480555 | L-1 | Accepted-AOC Successful Bidder | |
| 2 | L-2₹1.1 L+₹3,755.95 (3.70%)Rejected-Finance CONTRACTOR WARD NO 16 RAMANAGAR DAMUA POST DAMUA DISTRICT CHHINDWARA M P | DAMUA | CHHINDWARA | MADHYA PRADESH | L-2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L-3₹1.2 L+₹14,003.42 (13.8%)Rejected-Finance CONTRACTOR WARD NO 01 GHORAWADI PO GHORAWADI DIST CHHINDWARA M P | GHHORAWADI | CHHINDWARA | MADHYA PRADESH | L-3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L-4₹1.2 L+₹20,025.78 (19.7%)Rejected-Finance 344 MOTI NAGAR NEW BANK COLONY CHHINDWARA MADHYA PRADESH | CHHINDWARA | CHHINDWARA | MADHYA PRADESH | L-4 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹1.3 L
EMD Value
₹1,700
Closing Date
15 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil) KA
Office of the Area General Manager, Dungariya, Kanhan Area
Repair and Maintenance of Survey Office at Nandan Mine No. II under Ghorawari Sub Area
2023_WCL_270434_2
ka3450-civ-s-e059 of 2022-23
Open Tender
Civil Works - Others
Item Rate
30 days
Survey Office at Nandan Mine No. II
-----N.A.-----
4 documents required · 4 mandatory
₹1,700
22 Mar 2023
8 Feb 2023
16 Feb 2023
9 Feb 2023
15 Feb 2023
9 Feb 2023
9 Feb 2023 - 14 Feb 2023
Amount
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
Providing & Fixing of asbestos cement 6 mm thick corrugated sheets roofing and fixing with polymer coated J or L hooks, bolts and nuts, 8 mm dia G.I. Plain and bitumen washers complete excluding the cost of purlins, rafters and trusses : Upto 60 degrees pitch
Brick work with clay fly ash F.P.S. (non modular) brick of class designation 3.5 in super- structure above plinth level up to floor one level in: Cement mortar 1:6 (1 cement : 6 coarse sand).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars
Providing and fixing dressed/finished/polished Kadappa stone of size 25mm-40mm thick and Groove cutting in wall upto 25mm and making good the same etc complete as per direction of Engg-In-Charge.
Providing and fixing 1 mm thick MS sheet door with door frame of 35 x 35 x 5 mm angle iron and door shutter frame of 25x25x5mm, 20x4 mm MS flat at the back side of door shutter at sides, junctions, corners and as diagonal braces, 20x20x3mm angle iron at back side of door as middle piece and 25x5mm flat at front side in middle portion, all necessary fittings complete, including applying a priming coat of approved steel primer.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats
Colour washing such as green, blue or buff to give an even shade : Old work (two or more coats) with whiting.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Total impact of GST for the purpose of CTC
SATPURA ONE CONSTRUCTION
ANSARI BROTHERS
stage.html
html • 0.04 MB
techsummary_279804.pdf
PDF • 0.18 MB
finsummary_279804.pdf
PDF • 0.18 MB
AL-59-2-22-23.pdf
PDF • 0.18 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .