FOOTPATH WITH COVERED SHED NEAR RECRUITS LIVING ACCN AT 58 GTC UNDER GE SHILLONG

Amount

B/R Portion Excavating over areas, n exc 1.5 m deep and getting out Hard/dense soil complete all as specified and as directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

Material and Labour for broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

Material and Labour for sand filling for interlocking paver blocks complete all as specified and as directed.

Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed

Material and Labour 100mm thick of Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate in sub base complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out soft/loose soil complete all as specified and as directed.

Material and Labour for Cement concrete type D2 1:4:8using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

Material and Labour for preparation of new or previously untreated Surfaces of any description, over 10cm in width or girth, two coat of synthetic enamel paint over a coat of red oxide primer not otherwise described complete all as specified and as directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and Labour Pre-cast cement concrete type C1 1:3:6 using 20mm graded aggregate block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Material and Labour for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed

Material and Labour for preparation of new or previously untreated Surfaces three coat of white wash on wall surface complete all as specified and as directed.

E/M Portion Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil for laying of cable/erection of pole complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/loose soil complete all as specified

Removing excavated material of soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping around pole, including necessary formwork complete as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

Supply and laying of sub class B bricks locally available laying perpendicular of UG cable complete all as specified and directed.

Supply and fix MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed. (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule all as specified and directed.

Supply and fix MCB SPN, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and as directed

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and as directed

Supply and Fixing LED light batten fitting 1x 18W, 220V, AC with driver, holder including LED tube light fixed to wall/ceiling with 02 Nos PVC block of suitable size and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking doown old unserviceable light fitting all as pecified and directed.

Supply and fixing 40mm bore steel tubing galvanised light fgrade with all fittings laid across road, in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

Supply and fixing XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured, electric power cables heavy duty with stranded aluminium conductor, 1100 volts grade of size 10 sqmm 2 core fixed with wall with clamps including testing of cable complete all as specified and as dircted.

Material and labour for sub main wiring with two single core 2.5 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 2.5 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and as directed (Note: two run of 2.5 sqmm cable , one run of earth wire of 2.5 sqmm and one run of PVC casing capping shall be measured as one length) complete all as specified and as directed

Material and Labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M/S U.K ENTERPRISE

M/s Mangal Enterprise

Shekhar Trading Co.