PROVN OF ROOF COVERING FOR TCP DUTY REST ROOM AND GAS GODOWN SENTRY REST HOUSE AT DHANA MIL STN.

Amount

Excavation in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etc and getting out Hard/dense soil, complete all as specified and directed.

Excavation over areas not exceeding 1.5 M deep and getting out in Hard/ Dense Soil, complete all as specified and directed.

Excavation over areas exceeding 1.5 M and not exceeding 3 M deep and getting out in Hard/ dense soil, complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm, complete all as specified and directed.

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 ( Using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces, complete all as specified and directed.

M&L for Formwork to sides of pillars,posts, struts,piers, columns and stanchions for fair finished surface, complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface, complete all as specified and directed.

M&L for Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick, complete all as specified and directed.

M&L for Fair finished flat Form work to Chajjas, water troughs and similar items including edges, complete all as specified and directed.

M&L for RCC M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC M25 as in Columns, pillars, piers,posts and struts complete all as specified and directed.

M&L for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed

M&L for Reinforced Cement Concrete Type M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like, complete all as specified and directed.

M&L for Reinforced Cement Concrete Type M-20 (using 20 mm graded granite stone aggregate) in Chajjas and the like, complete all as specified and directed

M&L for Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed

M&L for Mild steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for Moorum/ Red bajri filling in floors/pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/ rolled including watering to required level and gradient, complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing, complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in dado/skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick backing coat in cement sand mortar 1:4, complete all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specified and as directed.

M&L Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4, complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished faiar and even without using extra cement incl; mixing of water proofing compound, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.

S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.

M&L for 2 nd class hard wood factory made 35mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L for 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded incl one shop coated red oxide primer, complete all as specified and directed.

S&F factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening, complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F MS butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked, complete all as specified and directed.

S&F 150mm size Extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint , complete, all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane, complete all as specified and directed.

S & F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each, complete all as specified and directed.

S&F 25mm dia drapery rod (Poles, finials , ring & bracket, complete all as specified and directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all as specified in SSR Part I, complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore, complete all as specified and directed.

S&F Vitreous china water closet Orissa pattern long pan size 580x440mm with trap front or back inlet and integral foot rest complete fixed in repair including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe, complete all as specified and as directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps, waste but including brackets, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long, complete all as specified and directed.

S&F in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia, complete all as specified and directed.

S&F in repair pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia, complete all as specified and directed.

S&F stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) 15 mm bore, screwed down, high pressure, screwed both end for iron pipe or for union, complete all as specified and directed.

S&F in repair low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets, complete all as specified and directed.

S&F in repair Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe, complete all as specified and directed.

S&F in repair soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw, complete all as specified and directed.

S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe, complete all as specified and directed.

M&L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door, complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore with access door, complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15 mm, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion, complete all as specified and directed.

M&L for Preparation to new surfaces of wall and applying 3 coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash, complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS16098 (Part 2):2013, complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 incl a coat f red oxide primer, complete all as specified and as directed. Note: Weight shall be verified by the Engineer in charge.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or J hook, complete all as specified and as directed.

S & F Pre- painted galvatume aluminum zinc coating GI based Plaint steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws or J hook, complete all as specified and as directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly,water through etc, complete all as specified and as directed.

S & F PVC Faceia Eaves board (Width of board not more than 200mm) at the edge of roof covering, fixed to MS roof frame work with self tapping screws or appropriate nail as per the design. Design and make as approved by Engr-In- Charge.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.

M&L for concealed point wiring complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete for:- (Note: Cost of cutting chase and making good shall be included in the quoted rate.)

One light point controlled by one, one way,SP, 5 Amps switch

One fan point controlled by one, one way,SP, 5 Amps switch

One socket outlet 5 pin, 5 Amps on the same board.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd.

S & F switch piano type, flush button single pole, one way 5 amps, complete all as specified and directed.

M&L for socket outlet 5 amps, 5 Pin, flush type, complete all as specified and directed.

M & L for ceiling rose, 3 pin surface, white /any shade , three terminal.

S&F MCB distribution board steel sheet, enclosures power coatad fitted with bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96,240 volts double door, complete all as specified and directed:-

SPN 4 way, 200 amps rated bus bar

S&F MCB in DB's/ Isolator of the following rating, complete all as specified and directed :-

MCB SPN 40 Amps, curve 'C' breaking capacity10 kA.

SP 6-32 Amps, curve 'C' breaking capacity 10KA

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6.30 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work, PCC pit with RCC cover, charcoal salt funnel, GI wire up to 7.5 mtrs length, complete all as specified and directed.

S&F 15 watts LED building security light fitting including suitable bracket and nut bolts etc, complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of poles, laying of cables etc in soft/loose soil complete

M&L for old size sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius for cable cover.

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables, complete all as specified and directed. Note :- For the purpose of payment only punned thickness will be measured.

S&F light grade 25mm GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable, complete all as specified and directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches/surfaces/walls, complete all as specified and as directed.

S&F PPR Gate Valves (Brass Insert) of 25 mm bore, complete all as specified and directed.

M&L for cutting in position / existing GI pipe line 25 mm dia & insertion of new GI Tee of suitable size for making pipe connection, complete all as specified and directed.

siddhant construction

CREATIVE CONSTRUCTION

m/s mahendra kumar khare contractor