REPAIRS TO CHAIN LINK FENCINGS ,GATES,FOOT PATHS,HARD STANDINGS ,AREA DRAIN ETC AND OTHER CONNECTED EXTERNAL WORKS AT AREA NO 3 AND REPAIRS TO JOINERY ,PLASTERING ,FLOORING ,DOORS , WINDOWS ,PLUMBING , SANITARY FITTINGS ,PERIODICAL SERVICES AND CON

Amount

Material and labour for Precast reinforced cement concrete 1:2:4 ,type B1 using 20 mm graded stone aggregate as in cover slab and set in cement morter 1:6, including demolition of Reinforced Cement Concrete of any description and in any position (reinforcement cut as required to facillitate demolition) and removal of debris off the premises and scrap iron taken as credit for complete all as specified and as directed

Material and labour for Precast cement concrete block masonry 1:3:6 type C1 ( using20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etcincluding demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position and removal of debris off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases etc, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level and removal of debris off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases etc, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level and removal of debris off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete 1:2:4 type B2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc,, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level and removal of debris off the premises complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level and removal of debris off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete, 1:4:8 type D2, using 40 mm graded stone aggregate, as in sub base of floor etc ,100 mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Plain cement concrete, 1:2:4 type B2, using 40 mm graded stone aggregate, as in sub base of floor etc ,50 mm thick including necessary steel form work complete all as specified and as directed.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed.

Extra for forming fair finished drain or channel of 45cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed.

Extra for forming fair finished drain or channel of 60cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed.

Supply and fix Rolled Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete etc conforming to Fe-410-W(Gde-E-250)quality -A including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Supply and fix Mild steel flat iron 40 x 5mm for securing wire mesh etc including necessary drilling holes etc conforming to Fe-290(Gde E-165) etc, including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Supply and fix Rolled Mild Steel angle, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 Gde E-165 etc, including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Supply and fix Mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia etc, including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Supply and fix Mild steel framed work (Ornamental and inctricate design) such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 etc, including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Material and labour for Restraining and resecuring including making good staple for steel barbed wire with 2 mm dia , including securing or tying at crossings with and provision of galvanised mild steel wire ,staples or steel pins etc complete all as specified and as directed.Note :Each line wire to be measured.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and as directed..

Supply and fix in repairs 600mm dia concertina coil fencing conforming to IS 4454 Part-I, made out of 2.6mm (+ or - 2%) dia of steel core wire galvanised and with anti rust coating (Black colour), with coils not less than 51 turns for an effective stretched length of 6metre with 2 handles, duly placed on existing supports over security/ compound walls and tied with 2mm dia binding wire and the spikes at the ends of coils embedded into PCC coping complete all as specified and as directed.. Note: PCC coping shall be measured and paid separately.

Dismantling fencing wire mesh, any type and description and taken as credit complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc, complete all as specified and as directed.

Supply only chain link fencing MS galvanised any size or type etc, complete all as specified and directed.

Matrerial and labour for Mild Steel round bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with and including mild steel wire (not less than 0.9 mm dia) or securing with clip quality conforming, Fe-410-W (Gde. E-250) quality -A or Fe 290 (gde-E-165) including dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed.

Material and labour for 10 mm thick Rendering on fair faces of brick work or concrete surface in CM 1:4 to receive wall tiles complete all as specified and as directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistent primer complete all as specified and directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Preparation of old decorated surfaces of wall and applying two coats of cement based paint complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, including dismantling stone sett paving of any description or thickness, removing, rubbish off the premises complete all as specified and as directed.

Material and labour for Rubber moulded chequered cement concrete tile of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. including dismantling stone sett paving of any description or thickness, removing, rubbish off the premises complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, 600mm bore, class NP2 (ISI MARKED) laid and jointed complete with collars Reinforced concrete pipes 600mm bore, class NP2, laid and jointed complete with collars including concrete bed to drain pipes with cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under, and haunching against the sides of pipes after they are laid and tested; in etc and dismantling of cast iron or reinforced concerete drain pipes, jointed in cement mortar and taking out of trenches of any description and taken as credit , removing, rubbish off the premises complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and taken as credit complete all as specified and as directed

Dismantling structural steel work in cluding doors, gates etc and taken as credit complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (TCT)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Rolled Mild Steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde E- 250) quality A, including dismantling wrought iron or mild steel work of any description and in any position and taken as credit complete all as specified and as directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles)consisting of frame made out of M.S.tubes for top and bottom rails.M.S. frame shall be covered wire heat strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,for fully gauzed,panel will be of wire gauze in lieu of single side prelam pvc sheet panel,the wire gauze shall be wrapped on an additional square 8mm M.S.tubes.the wire gauze shall be stretched to tighten firmly with beading, and joined together with solvent cement, and fixed in the frame at site all as per specification and drawing complete all as specified and as directed.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening but wood grain printed PVC sheet and edges will be painted to match printed sheet, etc complete all as specified and directed.

Repairs to loose hanging mild steel window/ ventilator shutters not exceeding 1sqm each including repairs to hardwares by welding for smooth functioning of the shutters including making good the welded surfaces to match with the existing window/ ventilator surface complete all as specified and directed. Notes: (i) Windows are to be fixed to the buildings upto 3 stories height. (ii) Hardwares wherever required to be replaced shall be measured and paid separately under respective items of this Schedule at supply only rates. (iii) Necessary safety belt, shoring and scaffolding including insurance cover shall be provided to workers for working in 3 storeyed building.The rate quoted by thne contractor under this itemshall deemed to include the above provisions

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 150mm extruded Aluminum alloy handles, cast type, anodized complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Make:Crown/Classic/Adarsh

Supply and fix in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for Premium quality Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises complete all as specified and directed. Note :Make of Tile :HR Johnson/Khajaria/Somany

Material and labour for Premium quality Coloured glazed ceramic tile of size 350mmx250mmx7mm /450mm x 300mm x 7 mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with shade of the tile including 10mm thick backing coat in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises complete all as specified and as directed.. Note :Make of Tile :HR Johnson/Khajaria/Somany

Material and labour for Machine cut Granite stone, 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Material and labour for Machine cut Granite stone, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 including dismantling stone slabs and tiles of any description or thickness in floors, aprons, laid or laid dry and pointed etc complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound . Note :Make :Impermo/Roff/Cico

Material and labour for 10 mm thick Rendering on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc completed all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:3 on fair faces of ceiling concrete surface finished even and smooth without using extra cement complete all as directed.

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, complete all as specified and as directed

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a preparatory coat of chalk whitening on plastered surface over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

Material and labour for Preparation of newly plastered ceilling surface of any description and applying two coats of distemper oil emulsion over a coat alkali resistent primer complete all as specified and as directed.

Material and labour for Preparation of old painted steel surface of any descripation over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old painted surface of wood and wood base surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old decorated plastered ceilling surfaces and applying two coat of distemper oil emulsion complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two coats of Oil Bound Distember over a coat of primer and including preparation of old decorated surfaces of wall complete all as specified and as directed.

Material and labour for 20mm outer dia 3-layer PP-R Polypropylene random co polymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors, including taking up or down for bore of pipes in 15 mm, steel tubing and connections and taken as credit complete all as specified and as directed..Note :Make :SFMC/VECTUS/KPT

Material and labour for 25mm outer dia 3-layer PP-R Polypropylene random co polymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors, including taking up or down for bore of pipes in 20 mm, steel tubing and connections and taken as credit complete all as specified and as directed..Note :Make :SFMC/VECTUSKPT

Material and labour for 50mm outer dia 3-layer PP-R Polypropylene random co polymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors, including taking up or down for bore of pipes in 50 mm, steel tubing and connections and taken as credit complete all as specified and as directed..Note :Make :SFMC/VECTUS/KPT

Supply and fix 150mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix in repairs PVC flexible pipe (waste pipe), suitable for 32 mm bore waste coupling of sink/ wash hand basin complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix in repairs Stainless steel grating with frame, dome type, 125 mm dia, with or without hole for waste pipe connection complete all as specified and as directed.

Supply and fix in repairs Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified and as directed. Note :Make :Jaguar/Cera/Hindware

Supply and fix CON-041KN 2 Way Bib Cock,etc complete all as specified and as directed. Make : Jaquar or equivalent product of Parryware Cat No : G4734A1 Two Way Bib Cock / Hindware Cat No : F330004CP Bib Cock 2 in 1 as approved by GE.

Supply and fix Tubular towel rail 600mm long of CP brass fixed with and including CP brass screws and plastic cleats ( minimum weight190gm ) .complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs 15 mm bore Bib tap brass chromium plated fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed.Note :Make :SEICO/PRAYAG/ESS ESS

S&F and fixed in repairs for 15mm bore Pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed..Note :Make :SEICO/PRAYAG/ESS ESS

Supply and fixin repairs Chromium plated shower rose with or without swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange, (Minimum weight 40gms) etc, complete all as specified and directed.(ISI MARKED)

Supply and fix 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.Note :Make :Prayag/M/S Shakthi Industries

SHREESAMARTH CONSTRUCTION

M/s. KIRAN M CHOUGULE

M/s B C CHOUGULE