Repair recarpeting of perimeter road and road surrounding to admin building at OFCd

Amount

Surface dressing, n exc. 15 cm deep, clean the surface in soft soil.

M/L for Excavating over areas, n exc 1.5 m deep and getting out in soft soil.

Removal of excavated Soil exc.500m but n.exc 1.0 Km deposited where directed.

Demolition of Plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (broken stone or boulders).

Roughening surfaces of old concrete floor/surface by picking, sweeping, scaraping clean and washing down with water to remove dust, etc.

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 70 mm thick.

Finishing cement concrete surface even and smooth using extra cement.

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green.

S&F of Plastic dividing strips, 1.5mm thick, 28 mm width

M&L for Soling (or sub base) 200 mm spread thickness with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber

M&L for 50 mm thick (compacted thickness) WBM, with coarse aggregates of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required

M & L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness more than 75mm )

Surface dressing by spraying evenly paving bitumen at 20 kg per 10 sq meters, blinding with 12.5mm stone chippings @ 0.14cu.m per 10 sq.m. and rolling to required gradient and camber ®

Repair to pot holes any depth, not exc 1.00 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good

Preparing surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. as directed by EIC/WIC.

M & L for applying evenly a priming/ tack coat with paving bituminous primer at 01 kg per Sq. metre as directed by EIC/WIC.

Bituminous premix asphaltic dense concrete 40 mm consolidated thickness with 6.0% binder content (paving bitumen binder) by weight of total mix, rolled and compacted to required camber and gradient complete in all respect. laid by Automatic Mechanical Paver with Power Roller ( 8 to 10 ton) and compacted to required camber and gradient complete in all respect.

Removing building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and tacking at the destination.

shree balaji builders (BID ID -741508)