Up-gradation of lift shaft by providing and fixing hard drawn steel wire fabric 25X25mm mesh including installation of rain water pipes in the Physics Department in HP University, Shimla-5

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. b) In gratings, frames, guard bar, ladder railings, brackets, gates and similar works

Providing and fixing hard drawn steel wire fabric 25 x 25 mm mesh of weight not less than 3.20kg per sqm to existing steel window frames etc. including 20x5 mm M.S. flat acting as beading and including welding rigidly & including a priming coat of red lead paint complete in all respect as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: a) 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for : a) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not lan than 4.5 Kg./ Sqm. cm including filling the joints with approval adhesive complete.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embedded in and including cement blaks 10 X 10 X 10 cm of 1:2:4 mix ( I cement :2 sand : stone aggregate 20 mm nominal size) and coat of cutting hales and making good wall etc.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven storey height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S tube challies, M.S clamps etc. M.S stair arrangement in the scaffolding for working platform etc. and making it in a serviceable condition for the required duration as approved and conveying it. Thereafter the scaffolding system shall be stiff and with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevations area of the scaffolding shall be measured for payment purpose. The payment will be made irrespective of duration of scaffolding.

Providing and fixing ACP sheet of 4 mm thick external of coloum beams/ door panel and wall surface around over existing steel frame upto floor five level of approved brand and design complete as per direction of Engineer-in-charge (frame work shall be paid separately)