SPECIAL REPAIR OF SHED FROM FIRING BAY NO 2 TO 15 AT LPR KHAMARIA UNDER GE (P) NO 1 JABALPUR

Amount

Dismantling plain or corrugated steel/fiber glass re-inforcement sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Fiber glass re-inforced translucent corrugated sheeting with two corrugation side lap with coach screw and washer in roof, wall etc of 2mm thick complete all as specified and directed.

S&F prepainted galvalme aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surfaces of wall in CM (1:4) in two coats of 10 mm first coat (including dubbing coat finished even and smooth without using extra cement) and 5 mm final coat. Both coat mixed with WPC finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Supplying only Integral Water Proofing compound (ISI Mark) complete all as specified and directed.

M&L for applying fire resisting paint of any description after surface of concrete, brick, stone, etc, exc 10cm in width or girth complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, similar work conforming to Fe-290 or E-165 complete all as specified and directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe-410-W (Gde-E-250) quality B complete all as specified and directed.

M&L for preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel surfaces of any description over 10Cms in width or girth, including preparation of surfaces complete all as specified and directed.

Demolition of PCC in ground floors and pavings n.exc 15 cm thickness (below or above ground level) (un-reinforced) complete all as specified and directed.

M&L 100mm thick PCC type B-2, (1:2:4) using 40mm graded crushed stone aggregate finished even and smooth without using extra cement complete all as specified and directed.

M&L Granolithic concrete 1:1:2 floor topping 30mm thick, laid over PCC subfloors etc and finished to an even and fair surface complete all as specified and directed.

S&F Plastic dividing strips, 1.5mm thick and inserted in position to conform to design width of strip 38 mm complete all as specified and directed.

M&L Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) thickness of topping 15 mm complete all as specified and directed.

Supply only metalic floor hardener complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation and mass concrete complete all as specified and directed.

RCC design mix M-25 using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

RCC design mix M-25 using 20mm graded crushed stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

RCC design mix M-25 using 20mm graded crushed stone aggregate in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc, vertical or to batter and fair finishing complete all as specified and directed.

TMT HYSD re-inforcement bars 10mm over dia including all cutting, bending, binding, cranking, placing and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

TMT HYSD reinforcement bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Schedule of credit amount of Rs. 40,250.00 to be deducted during AOC

RADHEY CONSTRUCTION