REPAIR TO COMPOUND WALL FENCING DRAIN PATH HARDSTANDING IN OTM ACCN AND MD ACCN UNDER AGE BR II AT FAIZABAD

Amount

Dismantling posts or struts (wood,steel or RCC) any section including taking out embedded portion in natural ground and making good disturbed ground complete all as specified .

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, in soft /loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified.

M&L for treating ends of posts, backs of chowkats etc, area tarred exc 0.1 Sqm but n exc 0.5 Sqm in each and treated with tar or coal tar black paints, complete all as specified .

M & L for PCC, 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in mass concrete for embedding post and similar works, complete all as specified.

S&F Mild steel work as in posts struts in fencing including cutting tops to shape as directed, drilling holes, notching of wire etc, flat iron fillet (for securing wire etc) including all nessaary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified .

Removing cement or lime mortar from from and cleaning bricks , stacking for measurement including all extra handling and removal and disposing off the rubbish off the premises, complete all as specified .

S & F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pins etc complete all as specified .

Demolition of brick work built in Cement Mortar including all quions, arches, pillars, etc and pre cast concrete articles complete all as specified .

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate )as drains, complete all as specified .

M & L for brick work with sub class bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified .

All as per item no 10 above but except brick (old size) any type including removing Cement or lime mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish from the primises , complete all as specified .

M&L PCC (1:3:6) , type B-1, (using 20 mm graded stone aggregate) as surfaces channel and drains finish even and smooth using extra cement , complete all as specified .

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water , complete all as specified including removing rubbish off the primises.

M & L for 15 mm thick rendering in cement mortar (1:4) finished even and smooth without using extra cement , complete all as specified .

M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) in coping /benching and bed block of cattle trap or similar work rounded and chamfered on edges etc complete all as specified and directed, complete all as specified .

Preparing of new plastered surfaces of wall and M&L for applying two coats of cement base paint complate all as specified .

M&L 75 mm thick PCC 1:3:6 , type C2, ( using 40 mm graded stone aggregate) finished even & smooth without using extra cement as in plinth protection /hardstanding , complete all as specified .

Dismantling of fening wire any type , complete all as specified .

S&F only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire , complete all as specified .

Supply & fixing Chain link MS galvanisd fencing, any size or type , complete all as specified .

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer, complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified .

M&L Framed work as in doors or gates of angle or other section with ornamental looks, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe 410-W (Gde E-250) to complete all as specified.

M&L Mild steel works for hooks, pintle hinges, large hasp and staples, hand made sliding door bolts, clamps, holdfast , plate washer and similar works small articles confoming to Fe 290 Gde E-165 complete all as specified .

Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick (below or above ground level) complete all as specified .

M&L for 100 mm thick plain cement concrete 1:5:10, type D2 ,(using 40 mm graded stone aggregate) as in sub base , complete all as specified .

M&L for Chemical coated, factory made, chequered cement concrete designer tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry over cement screed base laid and jointed with grey cement slurry with pigment to match the shade of tile, as in floors, complete all as specified .

M&L for 8 to 10mm thick (square) non skid colour heavy duity tiles (Endura) tiles of size 300mmX300mm, in floor complete all as specified .

M&L for Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified.

M&L for laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping complete all as specified .

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engr-in-charge.

S&F Mild steel Framed work of culvert, framed guard bars, barred iron doors, ladders, walkways and framework of watertanks and similar works etc conforming to Fe 290 Gde E-165, complete all as specified .

S&F for 50mm bore GI pipe as in Cattle Trap with and including embedding in concrete 1:2:4, Type B-1, (using 12.5mm graded stone agregate) and screwing etc. securing with 12mm dia bolts and nuts; complete all as specified .

S&F Mild steel work flat Iron to securing cut to shape, drilled and countersunk for screw including bending and welding, as necessary, riviting etc n exc 10 Kg each brackets conforming to Fe 290, as in Cattle Trap including embedding in concrete and screwing etc. securing with 12mm dia bolts and nuts; complete all as specified.

M & L for expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified .

S & Fixed in repair concertina coil fencing with punched taps concertina coil 900mm dia 10m openable length,having 60 nos rounds per 10 mtr length ,spring core wire (2.5mm thick ) of hight tensile strength of 145 to 165 Newton per Sq. mm,(Reinforced Barbed Tape ) wire ,stud tied with G.I staple sand G.I clips to retain horizontal , including necessary bolts, complete all as specified .

M&L for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified .

M&L for 15mm thick rendering on fair of brick/ concrete surfacez in cement mortar 1:4 and finished even and fair for receiving tiles, complete all as specified .

M&L for joint free (300mmx450mm) x8 to 9mm thick coloured glazedceramic tiles as in dado* vertical services set and jointed in neat sement slurry and pointed in coloured cement to match the surfaces , complete all as specified .

M&L for for complete removing of esixting traetment surface of concrete surafce of any description over 30cm width or girth and applying two coats of water bound maeking paint over one coat of primescomplete all as specified .

Sai Ram Associates

K R KAUSHAL AND SONS

A ONE ENGINEERING

R.S Enterprises

JYOT BUILDERS

awashyakta enterprises

M/s Sultan Khan

Saket Traders