Composite balance civil and electrical works of OLD AGE HOME (BLOCK - 1 AND BLOCK - 2) GHAINK Kot Bhalwal Jammu.

Amount

CIVIL WORK

Earth work in excavation by mechanical means /manual means in foundation trenches or drain (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kind of soils.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) ncluding disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed:

Disposal of excavated mulba beyond 50m lead upto 1 km.

Filling available excavated earth (excl. rock) in trenches, plinth, side of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by raming and watering load upto 50m and lict upto 1.5M.

Providing & Laying in position cement concrete 1:4:8 in stone aggregate 40mm excluding the cost of centering and shuttering . all works upto plinth level including cost /carriage of material by MT.

Providing & Laying in position cement concrete 1:3:6 in stone aggregate 20mm excluding the cost of centering and shuttering . all works upto plinth level.(stone crushed aggregate) including cost /carriage of material by MT.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc, complete 50 mm thick with 20mm nominal size of stone aggregate.including cost /carriage of material by MT.

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of w.c, kitchen and the like consisting of (1) 1st course of applying cement slurry@ 4.4 kg/ sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding of junctions of vertical and horizontal surface complete including carriage.

Centering and shuttering including strutting, propping etc. and removal of form for.

Foundations, footings and bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls under 20 cms wide

Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations. a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 andapproved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm. f) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase, including all Carriages, all around the slab.including cost /carriage of material by MT.

Making plinth protection 50 mm thick of cement concrete (1:3:6) (one cement: 3 coarse sand:6 graded stone agrregate 20mm nominal size) over 75mm bed of dry brick blast 40mm nominal size well rammed reconcilidated and grouted with fine sand including finishing the top smooth crushedincluding cost /carriage of material by MT.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15', landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including cost /carriage of material by MT.

Reinforced cement concrete work in walls (any thickness) incl attached pilasters, buttresses, plinth & string couses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including cost /carriage of material by MT.

Supplying and filling in plinth with fine sand under floors including watering, ramming consolidating and dressing complete

Providing and laying damp-proof course 50mm thk. With cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size including cost /carriage of material by MT.

Brickwork with common burnt clay F.P.S (non-modular) brick of class designation 75 in foundation/plinth & above upto floor 5th level in superstructure in cement mortar 1:5 including cost /carriage of material by MT.

Half brick masonary with brick of class designation 75mm75 in foundation/plinth & above upto floor 5th level in superstructure in cement mortar 1:4 including cost /carriage of material by MT.

Reinforcement for RCC work including straightening, cutting, bending and placing in position all complete cold twisted bars. T.M.T Fe 500 including cost /carriage of material by MT.

10mm thick plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand) including cost /carriage of material by MT.

15mm thick plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand) including cost /carriage of material by MT.

20mm cement plaster in two coates under layer 15mm thick cement plaster 1:4 ( 1 cement: 4 coarse sand) finished with a top layer 5mm thick cement plaster 1:4 ( 1cement:4 fine sand) complete incl. cost/ carriage of material by MT.

Providing and applying white cement based putty of average thickness 2mm, of approval brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound distemper of approved brand and manufacture to give an even shade (new work) two or more coats over and including primer coat with cement primer. (Block-I & Block-II) complete.

Applying one coat of water thinnable cement primer of appropriate brand and manufacturer on wall surface (Water thinnable cement primer). (Block-I & Block-II)

Finishing walls with water proofing cement paint of required shade New work ( two or more coats) applied @ 3.84 kg/ 10 sqm. (Block-I & Block-II)

Providing and fixing of 35mm thick deodar door shutter having side / top style 4.5", rail 6" and bottom style 8" including fixing water proof 12mm thick ply in pannels including fixing of moulding 1.5" all around the ply surface (for block 1 and Block 2)

Applying priming coat with ready mixed pink or grey primer of approval brand and manufacture on wood work ( hard and soft wood) (Block-I & Block-II)

Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade two or more coats on new work (Wood work). (Block-I & Block-II)

Painting with ready mixed synthetic enamel paint of approved brand and maufacturer in all shades to give an even shade including ready made mixed red oxide zinc cloromatic on steel / iron work laying VOC contact < 250 gm / litre. (Block-I & Block-II)

Providing and fixing handrail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying priming coat of approved steel primer. M.S tube (medium) (Block-I & Block-II)

Providing and fixing of M.S grills of required pattern in frames of windows extra with MS flats or round bar extra, including priming coat of steel primer all complete and fixed to pening / window frame with ROG plug screw extra to windows.

Providing and fixing 4mm thick glass pane in shutters for windows/ ventilators and fixed frames of make clearfloat glass of 'Saint Gobain"/ modi brand or equivalent. (Block-I & Block-II)

Providing and fixing 5.5mm thick glass pane in shutters for windows/ ventilators and fixed frames of make clearfloat glass of 'Saint Gobain" /modi brandor equivalent. (Block-I & Block-II)

Providing wood work in frames of doors, windows, clearstory windows and other frames, wrought frames and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs with dash fasteners shall be paid for separately): second class teak wood.

Providing and fixing 35mm thick wire guage shutters using Galvanised MS Wire guage of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors / windows/ clearstory windows incuding ISI marked MS Pressed butt hinges bright finished of required size with necessary screws (Second class Deodar wood).

Providing & fixing panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws all complete as per direction of engineer-in charge second class deodar wood. 35 mm thick .

Providing & fixing aluminium sliding door Bolts ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. 300x16mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.200 mm weighing not less than 120 gms.

Kota stone slab flooring over 20mm (average) thick. Base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4( 1 cement: 4 coarse sand) including cost /carriage of material by MT.

Kota stone slab flooring 25mm thick in riser of steps, skirting, dado & pillars laid on 12mm (av.) thick cement cement mortar (1:3) 1 cement 3 corase sand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including cost /carriage of material by MT.

Providing and Fixing gang saw cut mirror polish (premoulded & prepolished) macine cut for kitchen platform vanity, counter, window sills facias and similar location of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 with joints treated with white cement mixed to with maching pigment epoxy touch including rubbing, curing, mounding, repolishing to edge to give high gloss finish complete at all levels (jet black Granite area of slab upto 0.5 sqm. including cost /carriage of material by MT 16mm thick)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including cost /carriage of material by MT.

Size of tile 600mm x 600mm

Providing and fixing ceramic glazed floor tiles 300 x 300 mm (thk. To be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, RAK, SONAMY, KAJARIA or equivalent make in colour such as white,ivory,Grey, Fume Red, Brown laid on 20 mm thk. bed of cement mortar 1: 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete including cost /carriage of material by MT.

Providing and fixing 1st quality ceramic glased tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO, RAK, SOMANY, KAJARIA or equivalent make in all colour , shades, except begundy, bottle green, black of any size as approved by engineering charge in skirting, risers of steps and dados over 12mm thick. bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost /carriage of material by MT.

Plumbing/Sanitary

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.

Providing and fixing PTMT waste coupling for wash basin and sink Waste coupling 31mm of 79mm length and 62mm bredth weighing not less than 45gm.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32 mm dia

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm. (For Blocks -1 &2)

Providing and fixing of C.P Grating of required size (100mm)

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing toilet paper holder C.P. brass

Providing and fixing on wall face unpplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion by superior quality Finolex, Supreme & Prince.

160 mm dia

110 mm dia

75 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion by superior quality Finolex, Supreme & Prince.

Coupler

160 mm dia

110 mm dia

75 mm dia

Single tee with door

Single tee without door

160 mm bend

110 mm bend

75 mm bend

Shoe (Plain)

160mm Shoe

100mm Shoe

75mm Shoe

Providing and fixing P/S/F trap of required angles of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:

110mm inlet and 100mm Floor trap of make Supreme, finolex, Prince

110mm inlet and 75mm Floor trap of make Supreme, finolex, Prince

110mm inlet and 100mm P trap of make Supreme, finolex, Prince

Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) 1:4 ( 1 cement: 4 coarse sand) including cost /carriage of material by MT.

100mm dia.

75mm dia.

Providing and fixing M.S. stays and clamps for PVC pipes of diameter of superior quality.

100mm dia.

75mm dia.

Providing and fixing Soap dish (C.P. brass) with bracket (PTMT) of superior quality.

Providing and fixing towel ring (C.P. brass) (PTMT) of superior quality.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: (Prakash, Surya, Jindal).

15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

25 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) (Prakash, Surya, Jindal).

25 mm dia. nominal bore

40 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 15mm nominal bore

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 20mm nominal bore

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore

Providing and fixing C.P. Jet with connection pipe

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass close hole basin mixer centre hole of approved quality and make, weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work) of superior quality.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Constructing brick masonry chamber for underground C.l. ,inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 ( 1 cement: 5 fine sand) C. I. cover with frame (light duty) 455x6.1 0 mm internal dimensions, total weight of cover with fram.. e to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:2:4 mix ( 1 cement : 2coarse sand : 4 stone aggregate 40 mm nominal size),foundatior concrete 1:5:10 (1 cement: 5 fine sand: 10 graded f'tone aggregate 40mn nominal size), inside plastering 12 mm thlck with Gernent mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of;neat cement on walls and bed concrete etc. complete as per standard design : including cost /carriage of material by MT.

Inside dimensions 455x600x1 0 mm and 45 cm deep for single pipe line with common burnt clay bricks.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 em in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc.

Providing & Laying in position cement concrete 1:3:6 in stone aggregate 20mm excluding the cost of centering and shuttering . all works upto plinth level.(stone crushed aggregate) including cost /carriage of material by MT.

Providing & Laying in position cement concrete 1:4:8 in stone aggregate 40mm excluding the cost of centering and shuttering all works upto plinth level. including cost /carriage of material by MT.

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings and bases of columns etc. for mass concrete

Fixing of Plumbing items of block 1.

Labour charges for fixing of Vitreous WASH BASIN flat back pattm any size WHITE or any other COLOUR including fixing of MS brackets (Painted white), cutting holes in wall and making good the same, excluding labour for fitting red lead, white lead and painting to brackets but including the cost of cement and sand.

Labour charges for fixing vitreous PEDESTALS for wash basins WHITE or any other COLOUR including fixing the same incliding cost of white cement etc

Labour charges for fixing WHITE SEAT AND COVER with CP brass hinges and rubber buffers, for wash down WCs. Including fixing of cost of cement, sand etc.

Labour charges for fixing Low Level Vitreous FLUSHING CISTERN (12.51-itre Capacity) WHITE including fixing of MS brackets, all fittings chromium painted brass handle, procelairi enamelled flush bend, cutting holes and making good the wall, including cost of white lead, cement, sand, aggregates, painting of brackets.

Labour charges for fixing of basin mixer with complete fittings including allied material.

Labour charges for fixing of Soap DISH with brackets including charges for wooden I PVC plugs and CP brass screws and theircost. with complete fittings.including allied material.

Labour charges for fixing of CP Brass TOWEL RAIL with brackets including labour charges for wooden /PVC plugs and CPbrass screws and their cost.including allied material.

Labour charges for fixing of CP Brass TOWEL RING SQUARE with brackets including labour charges for wooden /PVC plugs and CP brass screws and their cost including allied material.

Labour charges for fixing of BIB COCK with complete fitting.

Labour charges for fixing of angular STOP COCK (regulating valve) with complete fittings.

Labour charges for fixing of WAST COUPLING 32mm half thread complete fitting.

Labour charges for fixing of PILLAR COCK WITH complete with complete fittings

Labour charges for fixing of LONG BODY BIB COCK with wall flange complete fitting.

Labour charges for fixing of S.S. FLANGE FLORENTINE (CP CUP) with wall flange complete fitting.

Labour charges for fixing of JALI complete fitting.

Labour charges for fixing of 40mm (Nominal) dia PVC WASTE PIPE to WASTES fixed to wash basin/ sinks including labour for PVC screwing cap and wastes with complete fitting.

Labour charges for fixing PVC connection with complete job.

Labour charges for fixing of JET SPRAY SET with complete fittings.

Labour charges for fixing extension nipples (All die) with complete fittings.

Note: For item No. 141 to item no. 159, the material for these items is already lying at site.

ELECTRICAL

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group B)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 6.0 sq. mm + 2 X 6 sq. mm earth wire

4 X 10.0 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following Modular base & cover plate on modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required of superior quality Usha, Cropmton or equilent

Upto 450 mm sweep

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing of following rating 240 Volts "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning. (Make as per annexure enclosed).

Triple Pole and Neutral 63/40 Amp.

Supplying and fixing of surface 15 watt LED type. Ceiling light including connections etc as required.

Supplying and fixing of 10 watt LED batten fitting for Mirror Light including connections etc. as required.

Supplying and fixing of surface mounted 20/22 watt batten LED tube fiiting 4 feet long including connections etc as required.

Supplying and fixing of surface mounted angle Holder suitable with 9 watt LED Bulb including connections etc as required. and complete with 9 watt LED Bulbs.

Supplying & fixing 50W LED Flood light fitting complete

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz including connections etc. as required.

Ceiling fan 1200 mm sweep (5 star Rating) of superior quality Usha, Cropmton or equilent

Exhaust fan 300 mm size

2-way AC Box

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required of superior quality Usha, Cropmton or equilent

Providing and fixing of L.T.Panel with the following switch gear IN COMING 240 A 4P MCCB 36K-1NO.,O/G 63A 4P25K MCCB-5 NO., 100A 4P25K MCCB-4 NO 63ATPN MCB-2NO.,63ASPN MCB-1NO.Complete with LED Indicator lamp,bus bar etc.and 63A 4p C/O Switch-1n0.(Make of sweatch gear use in Panel:- L&T/ABB/LEGRAND)

Providing and laying of 150sqmm 3.5 Core AL.Armoured Cable along with AL.Glands,PVC PIPE OF 110mm, excvation work,concreating etc

M/S SANJAY KUMAR

M/S MAGOTRA ENGINEERS and CONTRACTOR

Ajay Kumar

Sumit Gupta