A/R and M/O Himachal Sarai Bhawan Sector24 at Chandigarh

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying chemical water proofing treatment with five coats of polymer Raintite & 0.30 kg/sq. mtr/coat (1 part Raintite -0.5 part cement) coating by sand witching fiber mesh over one coat of polymer primer coat of Raintite & 0.20 kg/sq. mtr (1 part Raintite, 8 part water , 2part cement) followed by cleaning the surface throughly, repairing the damaged surface and cracks with polymer mortar @ 0.16 kg/bag of cement /1 part Rintite diluted with 1 part water, 2 part cement, and 1 parts fine sand). Injection grouting with cement slurry by admixing non shrink grout, making PCC coving/gola all around at junction of vertical- horizantal surfaces. The vital technical parameters of the material shall be as under:- Chemical base Acrylic based multipurpose polymer density -1.03 kg/L at 28 deg C and polymer content-28.0 % by weight. as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, 300x300x10mm of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 600x300x8mm (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rests as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing Division Plate for Urinals 600mm x 300. (Six hundred into Three Hundred milimetre) Vitreous China. including entire carriage of materials within all leads and lifts as per direction of Engineer-in-charge.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts and all incidental charges.

MANOJ KUMAR CONTRACTOR

Arvind kumar

Jakir Hussain