SPL REPAIR TO BLDG No P-103 AND PROVN OF GREASE TRAPS AT MESSES AND PROVN OF FIRE ALARM AND SMOKE DETECTION SYSTEM AT CERTAIN LOCATION AT AF BARNALA UNDER GE (AF) HALWARA

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc, complete all as specified and directed.

M&L Brick work with sub class ‘B’ Bricks straight or curved on plan exc 6M mean radius and built in cement mortar in 1:6, complete all as specified and directed.

M&L Brickwork with sub class 'B' Bricks, Straight or curved on plan to any radius in half brick thick wall built in cement Mortar 1:4, complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L 12mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC finished even & smooth without using extra cement, complete all as specified and directed.

M&L 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over a coat of primer and wall care putty on new plaster surfaces, complete all as specified and directed.

M & L for complete removal of old existing treatment and applying two coats of distemper oil emulsion over a coat of primer and putty filling the surface of walls, complete all as specified and directed.

M&L for preparation of new plastered suraces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for complete removal of old existing treatment on wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces, complete all as specified and directed.

M&L for Complete removal of old existing treatment and applying three coat white wash on ceiling surfaces, complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on Wall, complete all as specified and directed.

M&L for complete removal of old existing treatment and applying two coat white wash on wall surfaces, complete all as specified and as directed.

Taking down of chowkat / frames with shutter (w/o taking off shutter from frames) not exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 16 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars in 150mm spacing c/c including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately. (ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

S&F steel ventilator with side hung shutter including hinges, Steel peg stay, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

Supply and fixing for 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a); supplied and fixed to chowkats, complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately .

S & F factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood , plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed, complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 150mm size, complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply & fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pan, complete all as specified and directed.

S&F 4 mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pan, complete all as specified and directed.

S&F floor door stopper of aluminium alloy long anodized with hard drawn steel spring fixed length of cover plate 15 cm long, complete all as specified and directed.

S&F in repairs 25 mm dia Harison rails , mild steel , chromium plated with fixing fancy type brass cp brackets and side knobs, stops, rollers etc as in curtain rod and fixed to wall, complete all as specified and directed.

M&L for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of primer or red oxide on new steel surface of girth over 10 cm, complete all as specified and directed.

All as per item No 35 above but except red oxide primer.

M&L preparation of old steel surfaces and applying one coats of synthetic enamel paint on old steel surface of girth over 10 cm, complete all as specified and directed.

M&L for preparation of new wooden surfaves and applying 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface of girth over 10 cm, complete all as specified and directed.

S&F PVC door frame of size 50x47 mm made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube, complete all as specified and directed.

S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain colour PVC sheet for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of wood grain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and directed.

S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L 25mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, complete all as as specified and directed.

M&L joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (square/rectangular) in floor etc set joints in neat cement slurry and pointed in white or coloured cement to match the floor incl 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L joint less Glazed ceramic coloured tiles in vertical surface 300x200x7mm / 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface incl 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 50mm thick in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in plinth protections / path including necessary form work, complete all as as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring over 20mm thick cement screed base of cement mortar 1:6 laid and jointed with grey cement slury mixed with pigment to match the shade of slab including grinding and polishing over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per item No 48 above but as in skirting /dado with 10 mm thick rendering in cement mortar 1:4.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, complete all as as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 including sand cushion 30mm thick, complete all as as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore, complete all as as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 20mm bore, complete all as as specified and directed.

S&F Tube 'medium grade' galavanised with all fitting and fixed complete to walls and ceiling etc 15mm bore, complete all as as specified and directed.

All as item No 54 above but 20mm bore.

S&F in repair stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc, complete all as as specified and directed.

S&F in replacement of rotational moulded water storage tank (cylinderical vertical with closed top) tripple layer, white colour hoisted and fixed in position capacity 750 ltrs with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms), complete all as specified and directed.

S&F in repair cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate), complete all as specified and directed.

S&F in repair WHB in vitreous white chinaware of 550x400 mm size including CI/MS brackets ,45cm long PVC connection. PVC waste pipe, waste coupling of suitable size/length, 15 mm dia CP pillar tape, 15mm bore CP Angle cock and all connection, complete all as specified and directed.

S&F is repair vitreous china squating pan "Orissa" pattern size 580 x 440 mm white with integral foot rest including connection to trap and to flushing pipe, antyi syholic pipe etc complete including making good to floor, complete all as specified and directed.

S&F China ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass for EWC with PVC Chord and brass nozzle and fixed to pipe, complete all as specified and directed.

S&F Health faucet (ABS body mild steel chromimum plated suitable for 15mm dia pipe with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and directed.

S&F in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc, complete all as specified and directed.

S&F in repair PVC connection 45 cm long with two nuts and washers, complete all as specified and directed.

S&F in repair grating around 100mm size of PTMT (minimum weight 25 gms), complete all as specified and directed.

S&F in repair chromium plated shower rose & arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore, complete all as specified and directed.

S&F in repair bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed, complete all as specified and directed.

S&F in repair stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe of 15 mm bore, complete all as specified and directed.

S&F in repair stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe (concealed type) of 15 mm bore, complete all as specified and directed.

S&F soap dish any type fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Dismantling of 75 to 100 mm dia cast iron pipes, jointed in cement mortar and fixed to wall or laid in trenches and taking out if required, complete all as specified and directed.

S&F for 100 mm bore cast iron soil, waste and vent pipe and bend in any length with or without ears with cement joints fixed on walls/trenches etc with clamps, complete all as specified and directed.

S&F for 75 mm bore cast iron soil, waste and vent pipes and bend in any length with or without ears with cement joints fixed on wall/trenches with clamps, complete all as specified and directed.

S& F cast iron cowls 50mm bore of pipe, complete all as specified and directed.

Demolition of cement conrcete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roof, complete all as specified and directed.

Roughening surfaces of old/concrete floor by backing sweeping clean with iron brush and washing down with water etc, complete all as specified and directed.

M&L 50mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) finish even and smooth with using extra cement, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, padding concrete or in roof kerbs using 20 mm garded stone aggregate for roof, complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions, complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.

Supply only Integral waterproofing compound, complete all as specified and directed.

M&L for preparation of roof top surfaces providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106 on top of concrete roof surfaces all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75Kg/Sqm and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart bcare damp proof ultra @ total consumption 2Kg/sqm in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350% The material shall be applied with brush or rooller, complete all as specified and directed. Note :6 hrs interval between two coat will be maintain. All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . (i)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years . However contractor may deposit the FDR of same amount in favour of GE . If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor " risk and cost and the payment shall be made from the amount of kept reserved or by encashing the FDR deposited by the contractor as guarantee. the contractor's quoted rates for this item shall deemed to be inclussive of this aspect.

Demolition of reinforced cement concrete of any description and in any position, complete all as specified and directed.

M&L for precast reinforced cement concrete type B-1:2:4 using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sun shade etc, complete all as specified and directed.

M&L for reinforced cement concrete type B-1:2:4 reinforced using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sunshade etc, complete all as specified and directed.

M&L for 10mm dia TMT bars cut to length bent to shape as required including binding with mild steel annelid wire not less than 0.90mm dia, complete all as specified and directed.

M&L for 8mm dia TMT bars cut to length bent to shape as required including binding with mild steel annelid wire not less than 0.90mm dia, complete all as specified and directed.

M&L for formwork to sides and soffits of shelves, shelves, suspended slab, chajjas including support, overhanging etc. for rough finished surfaces of concrete flat, complete all as specified and directed.

S& F in repais cast iron cowls 100mm bore of pipe, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position (with clamps in wall), complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia, complete all as specified and directed.

S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Disconnecting existing tanks, setting a side (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position of capacity exc 250 ltr and not exc 500 ltr, complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepred for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running, also fasting and fixing complete. Fe 290 (Gde E-165), complete all as specified and directed.

Supply, install, testing and commissioning of grease separator (NS-4) suitable for underground installation. The Grease Separator should be made from polyethylene as per DIN EN 1825 for longer life. The Grease Separator should have nominal capacity not less than 930 Ltrs with Inlet/outlet socket of nominal dia of minimum 100mm with grease storage capacity of minimum 270 ltrs and sludge storage capacity of minimum 460 ltrs. Total weight of grease separator should be minimum 81 kg with overall dimension of at least 1380mm x 1595 mm (Dia X Ht). The Grease Separator should be capable of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressure of 10 kg with couplings for two-sided thread connection 75/75 mm for suction line, fire hose quick coupling 75 B and 2 1/2 blank cap and Counter flange with fire hose quick coupling 75 B and 2 1/2 black cap. Top cover of the Grease Separator plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour-free when closed. The weight of the cover should be 145 kg and manufactured to meet 1.50 ton load class requirement. The quoted rate shall be included for supply & installation, provide three days training for operation/function and transportation at site as per DIN EN 1825 and DIN 4040 100 suitable for underground installation). Make ACO Passavant, Model:- LipumaxPD NS4 Grease Separator plant or equivalent model in Saniflo, Kingspan Klargester, KESSEL Art No. 93004/80B, complete all as specified and directed.

Supply, install, testing and commissioning of grease separator (NS-2)suitable for underground installation. The Grease Separator should be made from polyethylene as per DIN EN 1825 for longer life. The Grease Separator should have nominal capacity not less than 930 Ltrs with Inlet/outlet socket of nominal dia of minimum 100mm with grease storage capacity of minimum 270 ltrs and sludge storage capacity of minimum 460 ltrs. Total weight of grease separator should be minimum 81 kg with overall dimension of at least 1380mm x 1150 mm (Dia X Ht). The Grease Separator should be capable of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressure of 10 kg with couplings for two-sided thread connection 75/75 mm for suction line, fire hose quick coupling 75 B and 2 1/2 blank cap and Counter flange with fire hose quick coupling 75 B and 2 1/2 black cap. Top cover of the Grease Separator plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour-free when closed. The weight of the cover should be 145 kg and manufactured to meet 1.50 ton load class requirement. (The rate shall be included for supply & installation, provide three days training for operation/function and transportation at site) as per DIN EN 1825 and DIN 4040 100 suitable for underground installation).Make ACO Passavant, Model:- LipumaxPD NS2 Grease Separator plant or equivalent model in Saniflo, Kingspan Klargester,KESSEL Art No. 93002/80B, complete all as specified and directed.

Notes for Srl Item No. 01 & 02 (i) Disconnection, reconnection and cutting of existing SGSW/PVC/CI/75mm/100mm /150mm bore pipe line site clearnace shall be included in the unit quoted rates. (ii) Installation of the grease traps shall be carried out under close supervision of manufacturers representative , unit quoted rate shall deemed to be included in the quoted rate. (iii) Sucking out grease impurities at the interval of 30 days and the maintenance of the grease traps required as per manufactures instruction shall be carried out by the contractor till the expiry defect liability period. (iv) The defect liability period of said item shall be 3 years from the certified date of completion of entire work covered under the contract. (v) In addition to the performance guarantee as specified in CA, contractor shall submitted FDR against guaranty/maint of grease traps for an amount equal to 5% of quoted amount against above said items failing which the amount shall be kept reserve from the due payable to the contractor. The FDR/reserved money will be released satisfactory completion of defect liability period of these items. (vi) Earth work and PCC shall be measured and paid for separately against respective item of this sch. (vii) Training for maint and operation of the grease traps shall be given by the manufactures representive to the kitchen cooking/cleaning staff and the cost thereof shall be included in unit quoted rate. (vii) Contractor shall submit the purchase voucher, e-way bills and all test certificate before calming the payment.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified and directed.

Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out, complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in foundation etc finished even and smooth without using extra cement, complete all as specified and directed.

Removing excavated material (Soil) exc. 250m but not exc. 500m and depositing where directed, complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

S&F reinforced cement concrete pipe 150 mm bore, class NP-3 laid in trenches and jointed, complete all as specified and directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4) using old size sub class ‘B’ bricks, complete all as specified and as directed.

M&L for PCC 1:2:4 Type B-1 ( 20 mm graded stone aggregate) as in PCC drain and coping, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement bconcrete using extra cemnt including forms moulds , mitred/ stoped ends, complete all as specified and directed.

All as per item No 108 above but add or deduct for each 25 mm girth or part thereof over or under 30 cm, complete all as specified and directed.

M&L for precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slabs (for manholes etc.) set in cement mortar (1:4) complete all as specified and as directed. Note - Reinforcement bars shall be measured and paid seperately.

M&L for framed work as in grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work and similar work etc; confirming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe, complete all as specified and directed.

S&F 45 Degree bends for 75mm dia PVC (SWR) pipe, any radius, fixed with solvent cement in any position as per site requirement, complete all as specified and directed.

M&L for75 mm thick plain cement concrete 1:3:6, type C-1, (20mm graded aggreagte ) as in sub base etc, complete all as specified and directed.

M&L for sand filling under floors or foundation including watering and ramming, complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block M-40 grade of any shape and size confirming to IS 15658-2006 with grey cement and no pigment, complete all as specified and directed.

M&L for cutting into existing man holes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ Section) in cement concrete 1:2:4 type B-I smooth finished and reforming benching as required for internal dia of pipe 150mm, complete all as specified and directed.

S&F in repair bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 20 mm bore, complete all as specified and directed.

Taking down aluminium / copper point wiring with surface / concealed stove enamelled steel / PVC conduit or wooden batten (light, fan, socket or power) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good the disturbed surfaces of walls, floors etc, complete all as specified and directed.

Taking down carefully unserviceable main switch and DB's including MCBs of any size make, type and of any make and type and capacity, complete all as specified and directed.

Taking down UNSV sub main wiring of any size make, type and capacity, complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sq.mm (nominal area) PVC insulated and PVC unsheathed FR cable, stranded copper conductor in existing conduit of size 20 mm with all fittings and accessories with sunk pressed steel terminal boxes for mounting of socket, switches, fan regulator etc for one light/fan point controlled by one switch or switch and regulator complete including PVC insulated and PVC unsheathed FR cable stranded copper conductor earth wire 1.5 Sq.mm size connecting to common earth and earth dolly switch, complete all as specified and directed. (a) One light point / Fan point ,Bell point controlled by one, one-way switch.

One switch socket outlet 3 pin 5 Amps, on Same board

One switch socket outlet 2/3 pin 5 Amps, on Independent board.

All as per item No 135 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board.

S&F Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and directed.

S&F Switch Socket combination piano, flush type, 15 Amps, singel pole, one way, complete all as specified and directed.

S&F Switch Socket combination piano, flush type, 5 Amps, singel pole, one way, complete all as specified and directed.

S&F Ceiling rose surface bakelite 65x50mm two to three terminal, complete all as specified and directed.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan, complete all as specified and directed.

S&F LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated, complete all as specified and directed.

S&F LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated, complete all as specified and directed.

Supply and fix 20W LED street light fitting, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories, complete all as specified and as directed.

S&F IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail, complete all as specified and directed.

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts, complete all as specified and directed.

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps, complete all as specified and directed.

Supply and fixing Isolator TPN 415 Volt 63 Amps, complete all as specified and directed.

Supply and Fixing Ceiling fan BEE labelling 5 Star Rated Voltage Single Phase, 230 Volts AC Frequency 50HZ Maximum and Power Input 50 Watt and Min air delivery 245 CFM and service value 6.0 and Sweep 1400 mm Standard Fittings down rod, Regulator, blades & Accessories Capacitor, double ball bearing, Down Rod, Canopy & other standard accessories for complete fitting of the fan, Certificate received from BEE mention input power, 5 star rating, complete all as specified and directed.

M&L submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade with one run of 6 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire, complete all as specified and directed. Note: (a) Two runs of 6 Sqmm single core copper cables and One run of earth conductor cable of 6Sqmm with casing capping/conduit will be measured and paid as one unit length.

M&L XLPE insulated armoured heavy duty electric cable with aluminium conductor 11000 volts grade, cross sectional area 35 sqmm, 4 core, complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point for soil, complete all as specified and directed.

S&F in replacement of GI tubing light grade 40mm dia for protection of cable fixed in wall or laid in trenches, complete all as specified and directed.

Supply and fixing storage type electric geyser of capacity 25 Ltrs operated on 230V AC 5 with energy efficient BEE 5 star rating, ISI marked with all safety accessories like thermostat with over heat protection, lead filled fusible plug, heating coil of suitable rating, fixed in any position by using anchor bolts, connected with both hot and cold water pipes including necessary fixing works required at site, complete all as specified and directed.

M&L in repair Earthing with galvanised steel earth plate electrode of size 60cmX60cmX6cm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to the galvanised earth lead by means of bolts, nuts and washers of galvanised iron or steel using GI or steel wire 4.00 mm dia as earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:2:4 type B-1 using 20mm grade stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @ 150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh charcoal and common salt in alternate layer of 15cm thick, complete all as specified and as directed.

Supply & Fixing exhaust fan Mild steel body (Heavy duty) 240 V AC single phase complete with lovers and shutters 300 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nuts etc, complete all as specified and directed.

S&F load line DB Double door including MCCB 125 Amps including dismantalling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP, SPN, TPN including neccesary repair to matching the existing surface of wall , complete all as specified and directed. Note :- SP, SPN, TPN shall be measured and paid Separetely under respective items.

Supply and fixing High Efficency IP 65 LED Street light of 70 W ,with Aluminum pressure Die cast housing, toughened glass in the front with bracket of suitable size and Peanut lens for batwing light Distribution, complete all as specified and as directed.

Supply and fixing Wall fan 400 mm sweep single phase 240 volt 50 Hz swing type, RPM 1400, Air Delivery (CMM) 85, number of Blades 3 having control method of pull string type made up of Plastic Body etc, complete all as specified and as directed.

Supply and fixing Desert Cooler iron Body made up of 18 gauge sheet, Power Coated, having 3 Speed, fan size of 20", motor of 180 watt, Copper winding and Submersible Pump of 18 Watt with wood wools pads, single phase 240 volt, 50 Hz, swing type, Power input 240 Watt, RPM 1400, Air Delivery (CFT) 2200 etc, complete all as specified and as directed.

Supply, installation, testing & comissioning of Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (having nos. of required loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit / 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators. The Panel shall have 2 Serial Ports. The panel shall have a built in power supply, battery charger maintenance free battery capable of running for a minimum 24 hours operation complete as required. The panel should also have IP30 or better protection. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS as per specifications complete in all respect up to the entire satisfaction of Engineer-in–charge, complete all as specified and directed.

Supply, installation, testing & comissioning of addressable multisensor smoke detector including mounting base with LED etc. complete as required with inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values. Detector should have IP40 or better protection rating, EMC safety for detector shall be 50 V/m Shall be UL/EN/VDS certification (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector), complete all as specified and directed.

Supply, installation, testing & comissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliat to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer– in Charge, complete all as specified and directed.

Supply, installation, testing & comissioning of Addressable Loop powered sounder complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer- in Charge, complete all as specified and directed.

M&L for wiring of PA system with the 2 core 1.5 Sqmm size of FRLS insulated copper conductor 2 core 1100 volts grade cables in existing surface/recessed M.S. conduit etc, complete all as specified and directed.

Supply and erection of PVC conduit pipe ISI marked (Medium grade) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction, complete all as specified and directed.

Notes for Srl Item No. 153 to 158. Fire alarm & smoke detection system work shall be got executed (Installed, commissioned & Testing) by the authorised representative of the manufacturer. The contractor shall submit the requisite Authorisation letter from the manufacturer to the Engr-in-Charge for approval before execution of work. The quoted rate shall deemed to be included for this provision and nothing extra shall be admissible on this aspect.

CHOUDHARY ENTERPRISES (BID ID -3382889)

m/s k.k. construction co. (BID ID -3374507)