REPAIR TO JOINERY, PLUMBING, FLOORING AND OTHER REPAIRS AT MD OTM ACCN, CLEANING OF SEWAGE LINES, TAKING OUT BLOCKAGE FROM WHB,WC, KITCHEN , URINAL, MANHOLE TO COVER, CLEANING OF DRAIN AND CERTAIN MAINT WORKS AT AFS SITE P UNDER GE AF THANE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge

Taking down door Chowkat Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge

Taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed by Engineer-in-charge

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-charge

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down complete all as specified and as directed by Engineer-in-charge

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm complete all as specified and as directed by Engineer-in-charge

S&F in repair aluminum anodized/powder coated windows/doors with necessaryaccessories/fitting including taking down and refixing after replacement of broken aluminium section, rectification of roller, wiremesh, window panes etc complete all as specified and as directed by Engineer-in-charge Note : All items used in rectification shall be paid separately under Srl Item No 8 to 12.00 below

Supply only aluminium anodised/powder coated (minimum thickness of powder coating 50 micron) frame for doors/windows, ventilators and aluminium section for windows as directed

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers complete all as specified and as directed by Engineer-in-charge

Supply stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane complete all as specified and as directed by Engineer-in-charge

Supply only aluminium anodised/powder coated star lock for doors/windows, as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated.

S&F in repair for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats.

M&L for medium density fibre board 18/19mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work

M&L for medium density fibre board 12mm exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work.

S&F 40mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed .

S&F Bands, straps,supports or stays for rainwater pipes, hold fasts etc complete all as specified and conforming to Fe-290 Gde-E-165 etccomplete all as specified and as directed .

Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and as directed .

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long ,complete all as specified and as directed .

S&F extruded aluminium alloy handles 150mm fabricated type, anodised ,complete all as specified and as directed .

S&F Aluminium alloy, anodised, sliding door bolt with hasp, 300mm long staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium Alloy and fixeD complete all as sfpd and directed Make-classic/Shalimar etc equivalent ISI Marked.

S&F in repair door sliding bolt aldrop 300mm long aluminum anodised all as specified and as directed by Engineer-in-charge ( Make-classic/Shalimar.)

S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long ,complete all as specified and as directed .

S&F extruded aluminium alloy handles 100mm fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F but hinges stainless steel 100mm long,complete all as specified and as directed .

S&F Mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge

S&Fin repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as spcd.

M&L for preparation of old wood surfaces of any description over 10cm width of girth applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.

S&F in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-charge

S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge

S&F sheet glass ordinary quality 6.3 mm thick and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge

S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge

S&F in repair floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm complete all as specified and as directed by Engineer-in-charge

S&F in repair magnetic catches MS body and striking plate with aproved quality complete all as specified and as directed by Engineer-in-charge

S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specified and as directed by Engineer-in-charge

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board all as per directed and specified by engr-in-charge

Extra over rates of block board or veneered particle board 12mm thick for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed by Engineer-in-charge

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-charge

S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame work all as directed.

S&F in repairs aluminium door closer hydraulically reguleted, designation No. 3 univarsal type aluminium extruded body suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgcompete all as specified as directed by Engineer -in -charge .

S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, with stainless stell cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area compete all as specified as directed by Engineer -in -charge .

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in dry mortar complete all as specified as directed by engineer-in-charge.

M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including 10mm thick rendering in CM1:3 complete all as specified and as directed by Engineer-in-charge.

S&F in repair stainless steel kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' complete all as specified and as directed by Engineer-in-charge.

S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of Old Steel surfaces of any description over 10cm width of girth applying one coats of synthetic enamel paint etc complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of New Steel surfaces of any description over 10cm width of girth applying Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer etc complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm two way bib cock for health faucet complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge

M&L for galvanised iron tube 20mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge

Refixing old 20mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Engineer-in-charge

Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Engineer-in-charge

M&L for galvanised iron tube 15mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge

S&F in repair PVC cabinet mirrors of size 550x400x75mm including necessary shelves made of PVC sheets of minimum 5mm thick and mirror fixed on the front side of the shutter complete all as specified as directed by engineer-in-charge (Make- Neelkamal,Prayag,Supreme)

S&F in repair stop valves 15mm dia fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified as directed by engineer-in-charge

S&F in repair Bib taps, fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified as directed by engineer-in-charge

S&F in repair brass CP brass shower rose with swivel joint 125 mm size all as specified in repairs complete all as specified as directed by engineer-in-charge

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified as directed by engineer-in-charge

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge

S&F Grating doom 100mm dia of PTMT (Min weight 25gms) complete all as specified

S&F Grating doom 125mm dia with waste hole of of PTMT (Min weight 40 gms) complete all as specified

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified as directed by engineer-in-charge

M&L cement concrete 40mm thick type B-1 1:2:4 9using 20mm graded stone aggregate) as in sub base of floors etc complete all as specified

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:3 and pointed in white or colour cement to match complete all as specified as directed by engineer-in-charge

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

M&L Vitrified ceramic tiles light shade 10mm thick 9square/ractangular) polished area of each tiles n.exc 0.36 sqm in floors set and jointed in and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

M&L Granite 20mm thick (of any type) work (table rubbed and polished in steps,jamps,pillars cooking plat form and like in CM 1:4 including pointing in white cement(1:2) etc complete all as specified

M&L machine cut Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs incl rubbing and polishing incl 15mm thick screed bed in CM 1:4 complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified as directed by engineer-in-charge

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified as directed by engineer-in-charge

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, CP waste fitting and PVC waste pipe complete all as specified as directed by engineer-in-charge

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including, connection to trap, complete all as specified as directed by engineer-in-charge

S&F in repair CP health faucet (ABS body)mild steel chromium plated suitable for 15mm dia pipe with 1.25 metro long Flexible Tube & Wall Hook complete all as specified and as directed by Engineer-in-charge (Make : Pryag, Seiko, Jaquar)

S&F in repair for PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge

Dismantling water tanks (exc 250 liter but n exc 500 liter capacity) and removing to store

Dismantling water tanks (exc 500 liter but n exc 1000 liter capacity) and removing to store

Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair Gun-metal, globe or gate valves, 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed

M&L for cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with rotary sets with approved detergents and sucking all dirty water by vacuum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by Engineer-in-Charge. (a) Overhead PVC water tank n. exc 500ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk

Ditto as per Srl Item No 95.00 above but Overhead PVC water tank n. exc 1000ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk

Ditto as per Srl Item No 95.00 above but Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from months of circulating pipes etc

S&F in repair Brass CP mixer for mixing hot& cold water screwed down for iron pipe and fixed to 15mm dia bore pipe etc complete all as specified

Dismantelling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-In-Charge.

M&L for 15mm thick mineral board fine fissured in true horizontal level of size 600x600 mm as in false ceiling hot dipped galvanised steel section exposed surfeces with precoated capping main centre to centre size 24mm x 32mm having 0.27mm gauge at every 1200mm centre to centre and wall angle of size 19mm x 19mm having 0.35mm gauged fixed to periphery at every 1200mm c/c on both directions using 3mm thick prestrightened at every 1200mm c/c on both directions using 3mm thick prestrighteed GI wire, laying etc complete all as directed by Engr-in-charge

S&F in repair but hinges stainless steel 100mm long.

S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

S&F powder coating of any colour(Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed by Engineer-in-charge

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron)aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc with .complete all as specified and as directed by Engineer-in-charge

S&F aluminium door closer hydraulically reguleted, designation No. 3 univarsal type aluminium extruded body suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg, complete all as specified and as directed by Engineer -in -charge.

S&F Mortice lock, vertical type, size 100 mm Aluminium 2 levers , complete all as specified as directed by Engineer -in -charge.

S&F in repair Mortice lock,vertical type, size100 mm Aluminium 2 levers , complete all as specified as directed by Engineer -in -charge .

M&L for filling HDPE sand bags khaki of size 30cmx30cmx80cm with sand and closing the open end with nylon wire complete all as specified and directed by Engr-in -charge.sand bag Cat NoB/N/IV manufactured by- DCPL or Equivalent. ( Note: The material for filling of HDPE bags is used from Srl Item No 111.00 & 112.00 )

Supply only for screnned seive fine sand in any shape/position as approved by engineer in charge.

Supply only for saw dust in any shape / position as approved by engineer in charge.

Labour for mixing in proportion for items mentioned above (i.e Srl Item No 109.00 & 110.00) as decided by Engr-in- charge including sieving,laying,stacking ,depositing and lifting the mixture up to 6.00m and laying in slope,complete all as specified and as directed by Engr-in-charge.

Labour for extraction of old existing mixture and sieveing, lifting, laying, stacking and depositing the mixture as directed by engineer in charge. (Note: Old serviceable material retrived shall be used against relevent item of Sch A i.e against Srl Item No 108.00 above)

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses in walls or to bricks on edge in floors, surface channels, roofs, etc and PLASTERING And POINTING Flush pointing to block in course or ashlar masonry or concrete block walling o random rubble masonry, uncoursed or brought upto courses in Cement mortar 1:4 , complete all as specified as directed by Engineer -in -charge

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying one coat of white wash on walls , complete all as specified as directed by Engineer -in -charge .

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying two coat of white wash on walls , complete all as specified as directed by Engineer -in -charge

M & L for preparaing plastered or unplastered surfaces of old ceiling including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of white wash on ceiling, complete all as specified and as directed by Engineer -in -charge.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of Oil bound distemper on walls all as specified and as directed by Engineer-in-charge

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of Oil bound distemper on ceiling all as specified and as directed by Engineer-in-charge

M & L for preparaing plastered or unplastered surfaces of old walls including washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of Oil bound distemper on walls , complete all as specified and as directed by Engineer -in -charge.

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying two coat of Acrylic emulsion paint white/sapphire blue or tinted over a coat of weather proof primer on walls including cornices etc. , complete all as specified and as directed by Engineer -in -charge.

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying one coat of Acrylic emulsion paint white or tinted on walls including cornices ,complete all as specified and as directed by Engin-in-charge.

M&L for 3mm thick one coat of wall care putty on wall ,complete all as specified and as directed by Engin-in-charge.

M&L for 3mm thick one coat of wall care putty on ceiling ,complete all as specified and as directed by Engin-in-charge.

M&L for writing letters or figures (in block, roman, italic or indian etc ) nexc 30 cm high. complete all as specified and as directed by Engineer-in-charge

S&F in repair Drapery curtain rod/ Harrison rails of Mild steel chromium plated alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with putty or fixed with beads exc 1.5 mm ,complete all as specified and as directed by Engin-in-charge.

S&F in repair 3mm thick sheet glass ordinary quality and glazing in any type of frame with oil putty (or bedding) in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-charge

Ditto as per Srl item No. 127.00 above but figured glass ,complete all as specified and as directed by Engin-in-charge.

M&L for coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:6 and pointed in white or colour cement to match complete all as specified as directed by engineer-in-charge

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:6 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

S&F stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified as directed by engineer-in-charge

S&F in repair aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified as directed by engineer-in-charge

S&F in repair soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-in-charge

S&F grating of PTMT of dia 125mm with or without waste hole complete all as specified and as directed by Engineer-in-charge

Supply and fix 15mm outer dia 3-layers PP-R polypropelene random copolymer concealed pipes SDR7.4(PN 16) UV stabilised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaed polypropylene random fitting fixed complete to walls ,ceilings or in floor etc ,complete all as specified and as directed by Engin-in-charge.

S&F 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed ,complete all as specified and as directed by Engin-in-charge.

S&F for gun metal globe or gate valve bore dia of pipe in 20mm complete all as specified and directed.

S&F in repair for PVC (SWR) bends 110mm any radius with rubber ring complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) branch piece 110 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) branch piece 75 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair stop cock of 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as diected.

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed

Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified.

M&L for rendering 5mm thick in cm 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement complete all as specified and as directed by engineer-in-charge

M&L for rendering 15mm thick in cm 1:6 on fair faces of concrete or brick surface of wall and finishing the surface even and smooth without using extra cement all as specified and as directed

M&L for preparation of new plaster surfaces and apply two coat of white wash on ceilings complete all as specified and as directed by engineer-in-charge

M&L for preparation of new plaster surfaces and apply two coat of white wash on walls complete all as specified and as directed by engineer-in-charge

M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on wall all as specified and as directed.

M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on ceilings all as specified and as directed.

Opening cover de-watering and taking out sludge from septic tank of any size and removing sludge out side MD land and cleaning the septic tank as per BMC rules and placing cover in original position. Note :- The measurement for the quantity sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface on measuring rod for payment purpose.

Labour for cleaning/clear of blockage of manholes, gully traps, floor traps, vertical soil/waste pipe of different dia (upto four storey bldg) and sewage line in the area of AF station SITE P (Domestic and Tech area) by providing and deployment of 02 (TWO) Nos of Labours per day including Sundays and Holidays. Note : a) The labour (02 nos) will report daily at 0845 hrs on all working days including Sundays and holidays at complaint cell centre to attend complaints given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints. The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc.) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.900/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @250 Rs per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of Engr-In- Charge is final in this respect. Two persons will be provided by the contractor at site. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints slips shall be maintained by contractor at their own cost, which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge.

Notes for Srl Item No 151.00 is contd../- (d) The documents viz. attendance register, complaint register, log sheet / record of complaint made / attended shall be maintained separately for each locations / complaint center. (e) The police verification with regard to antecedent and character of tradesmen engaged by the tenderer, shall be carried out by the contractor at his own expenses before obtaining temporary pass on monthly basis. (f) The police verification report, showing names and addresses of tradesmen shall be required to be submitted to the Engr-in-Charge/GE as and when asked for. (g) The contractor shall submit attested copies of necessary safety insurance for subject tradesmen/supervisor employed for the execution of contract.

Systematically cleaning of 150 mm dia pipe sewage/drains by passing rope knots, bumboos kampti and disc of required size from manholes to manholes septic tank and well flushing after cleaning sewer line/drain pipe with water (excluding manholes and septic tanks) including safety measures such as test for gas etc complete all specified and directed.

Demolition of brickwork or stone boulders masonry built in CM for foundation etc or for shafts, walls cesspits, manholes etc ,complete all as specified and as directed by Engin-in-charge.

Excavation in trenches not exceeding 1.5 mtr wide and n exe 1.5 mtr in depth for foundation for shafts well cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outetc not exceeding 10 Sqm on plan and getting out in hard /dense soil ,complete all as specified and as directed by Engin-in-charge.

Demolition and breaking up drain pipes 200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all specified and directed.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all specified and directed.

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 200 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 150 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified

Dismantling of cast iron or reinforced concrete drain pipes 200mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 200 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified

M&L cement Concrete bed for drain pipe of 150 mm bore dia including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate), complete all as specified.

M&L cement Concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) bore of pipe is 200 mm complete all as specified.

Supply and fix in repairs salt glazed stone ware gulley traps, square or round mouthed type 'P' of size 150 mm x 150 mm complete all as pecified.

M&L for walling Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in 1:3:6 type C1 20mm graded aggregate set in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge

Rendering 15 mm thick on fair faces of brick work or block masonary/ concrete surfaces in cement mortar 1:4 mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified.Note: Water proofing compound will be measured and paid seperately.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,complete all as specified and as directed by Engin-in-charge.

Rendering 10 mm thick in repair on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified.Note: Water proofing compound will be measured and paid seperately.

Supply only integral water proofing compound , complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching for manholes etc including weathering slighting rounded or chamfered angles and throuting including necessary formwork as directed by Engineer-in-Charge.

M&L for RCC 1:2:4 type B1 using 20mm graded broken stone aggregate as in precast cover slab for man hole etc. and setting in cement mortar 1:4 complete (Note:- Reinforcement shall be measured and paid seprately ) all as specified and as directed.

M & L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars , complete all as specified and directed by Engineer-in-Charge.

Ditto as per Srl Item No 172.00 above but 6 mm to 8 mm dia, quality confirming to Fe 410-S or Fe 410-0

M&L for Cutting into existing manholes for connect in new drains for 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel ½ round or ¾ section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required all as specified

Returning, filling in including spreading, levelling watering and well ramming in leyers n.exc 25cm each layer in soil , complete all as specified and directed by Engineer-in-Charge

Removing surplus soil n.exc 50 mtr away deposited where directed n.exc 1.50 mtr high from the starting point , complete all as specified and directed by Engineer-in-Charge

S&F, in repair,PVC (SWR) pipe 75mm bore of pipe, single socket in any length with rubber ring joint, fixed to walls /Floor , complete all as specified and directed by Engineer-in-Charge.

Ditto as per Srl Item No 176.00 above but 110 mm dia of pipe in repair all as specified & as directed by Engr-in-Charge.

S & F in repair PVC (SWR) bends 75 mm dia with access door all as specified and directed by Engr-in-Charge.

Ditto as per Srl Item No 178.00 above but 110 mm dia of pipe,in repair all as specified & as directed by Engr-in-Charge.

S&F in repair PVC (SWR) branch pieces, single(equal or unequal) or with parallel branches 75 mm dia ,complete all as specified

Ditto of item No above but 110 mm dia pipe.

S&F in repair PVC (SWR) branch pieces, double 'Y' shape (equal or unequal) or with parallel branches for 110 mm dia , complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC (SWR) junction, single 'T' (equal or unequal) 110 mm dia , complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC (SWR) junction, double 'T' (equal or unequal) 110 mm dia, complete all as specified and directed by Engineer-in-Charge

Taking down the steel rolling shutter push and type n-exc 12 Sqm area of clear opening each including hood cover and cleaning the sides of shutter suspension and guide shannelks and greasing all the moving parts of rolling shutter shaft and replacement of bolts and nuts as required for smooth functioninig of shutters and refixing the same including hood cover , complete all as specified and directed by Engineer-in-Charge

Ditto all as per item No 185.00 above but gear operated rolling shutter n-exc 30 sqm area including adjustment of gear worms assembly complete

S&F in repair mild steel lock plates/ handles made out of MS flat 35x5 , complete all as specified and directed by Engineer-in-Charge

S&F in repair mild steel helical wire spring of gauge 1 of approved make and 12" long , complete all as specified and directed by Engineer-in-Charge

S & F in repair 3.15mm thick mild steel brackets plate hexagonal or circular shape including welding (13"X13" size) , complete all as specified and directed by Engineer-in-Charge

S & F in repairs MS gear assembly complete including connecting and fixing the gear box to wall with two nos hexagonal bolts 10mm dia 10 cm long complete and grouting the bolt in cement mortar in 1:3 , complete all as specified and directed by Engineer-in-Charge

Ditto- all as per Srl Item No 190.00 above but except supply of gear box assembly , complete all as specified and directed by Engineer-in-Charge

S & F in repair in MS hood cover made out of mild steel sheets 1.00mm thick including bending the steel sheets to required shape and fixing the sheet to the rolling shutters bracket plate including one coat of red oxide primer and two coat of aluminium paints all as specified

S & F in repairs of roller ball bearing ISI marked for 40mm dia pipe shaft , complete all as specified and directed by Engineer-in-Charge

M&L Steel rolling shutters, thickness of laths 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and as directed by Engr-in-charge

Ditto as per Srl Item No 194.00 above but gear operated type with bevel gear box and crank handle complete all as specified and as directed by Engr-in-charge

M & L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer ,complete all as specified and directed by Engineer-in-Charge.

Supply and fix MS gear handles of approved make for gear operated rolling shutters ,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted steel surface and applying two coats of synthetic enamel paint ,complete all as specified and directed by Engineer-in-Charge.

Dismentling of wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for ,complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5n cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified ans directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D-2 using 40mm stone agg as in foundations, filling & mass concrete ,complete all as specified and directed by Engineer-in-Charge.

M&L for square rectangular or polygonal formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete complete all as specified ans directed by Engineer-in-Charge.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) for rough finished surface of concrete of foundation and plinth beams; and similar work; vertical or to batter complete all as specified ans directed by Engineer-in-Charge

M&L for RCC type B1 (1:2:4) (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified ans directed by Engineer-in-Charge.

M&L for RCC type B1 (1:2:4) (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified ans directed by Engineer-in-Charge.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 Gde E-250 ,complete all as specified and directed by Engineer-in-Charge

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for Providing type B0 1:2:4 (12.5 mm graded aggregate)set in cement mortar 1:4, precast cement concrete louvres and jallies, 35mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed by Engineer-in-Charge

S&F steel work in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Gde St-240 Fe 410 Gde-E-250 ,complete all as specified and directed by Engineer-in-Charge

Dismentelling wire mesh any type complete all as specified ans directed by Engineer-in-Charge complete all as specified ans directed by Engineer-in-Charge

S&F GI wire chain link fencing ( Minimum wt 2.5kg/sqm) minimum 2.5mm thick (excluding PVC coat) , UV resistant ,1mm dia PVC coated , 75X75mm mesh size,complete all as specified ans directed by Engineer-in-Charge.

S&F in repair 1MM thick Mild steel, plain, black sheet but in hearths;covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed by Engineer-in-Charge

Dismantelling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Charge

S&F,in repair,concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevent item of Sch A)

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire complete all as specified and directed by Engineer-in-Charge

Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

M&L Cement concrete 100mm thick type D-2 (Using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-30 Gde complete all as specified

M&L 25mm thick sand cusion under layer of floors complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmx20cmx40mm thick set and jointed and pointed in neat cement slurry with grey pigment cement and pigmetns including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer with camoulfage pattern complete all as directed.

M&L cleaning and preparation of old painted surface of wall and applying one coats of weather proof acrylic paint with camoulfage pattern complete all as directed.

M & L for preparation of old powder coated galvalume sheet surface by scrubbing 100% surface with emery paper or mechanical scrubber to achieve 100% surface roughness including necessary scaffolding for slopped roof of building upto 25 metre height etc complete all as specified.Note:- Necessary safety measures for working labours shall be done by contractor before commencement without any extra cost.

M & L for preparation of old painted surface of slope roof and applying two coat of synthetic enamel paint in different shades of camouflage pattern including necessary scaffolding for slopped roof of building upto 25 metre high etc complete all as specified. Note: - Necessary safety measures for working labours shall be done by contractor before commencement without any extra cost.

M & L for cleaning and preparation of old painted surface of steel and applying one coat of synthetic enamel paint in different shades of camouflage pattern including etc complete all as specified.Note: - Necessary safety measures for working labours shall be done by contractor before commencement without any extra cost.

M & L for preparation of old steel surface over 10 cm width or girth and applying one coat of synthetic enamal paint over steel surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of acrylic weather coat exterior paint over a coat of weather coat primer with camouflage pattern complete all as specified and directed by Engineer-in-Charge.

Biju Construction & Co

M/s Mukesh Engineers

MSK Everlast Enterprises

S K ENTERPRISES

Vinod Enterprises

Parmatma Enterprises

M/s Qureshi Construction Co