15th FC Tied Basic Grant 1stInstallment 2022 2023

Amount

Conduction geophysical survey quality and quantity test an transportation charges etc., (Rate as adopted by TWAD board)

Supply and delivery of 180nmm Dia PVC CASING PIPE AS PER IS 12818 / 2010 including cost of conveyance to the site etc., complete as per standard specification.

Drilling of 150 mm Dia. Vertical clear bores in hard rock in anywhere in Namakkal district to any required depth as directed by the officers concerned including labour charges for inserting MS / PVC casing pipes to any required depth, assembling in the drilled hole including welding jointing if necessary, grouting the casing pipes including conducting proper yield test at final depth (by providing 90 0 V notch fitted in a formed channel and the correct yield at the time of free flow in the channel and the correct yield at the time of completion of drilling process should be ascertained of and reported ) and providing cap including transportion, crew and fuel charges for rigs and supporting vehicles from one place to another etc., complete.

a). Upto 150m Below GL

b). From 151m to 180m

c). From 181m to 210m

d). From 211m to 240m

e). From 241m to 270m

f). From 270m to 300m

g). From 300m to 330m

h). From 331m onwards

Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the departmental officers.

Supply and delivery of Three phase submersible pump set suitable 150mm dia Borewell with ISI mark IS 8034 Without pannel board of 125lpm x 225m head etc complete.

Supply and delivery of Three phase Star Delta pannel board with two level quard suitable for 10.Hp submersible motor with two level guard confirming to IS 13947 and auto start etc. complete.

Supplying delivery of M.S Kisok Box of Size 75mm x 45mm x 75mm made Up m.S Angle of size 50mm x 50mm x 4mm Alround Covered with 16 gauge M.S sheet and Kisok Door made up M.S plate of size 25mmX 3mm including Cutting Welding grinding Locking Arrangement and labour Charges Etc Completed As per Std Specification

Supply and delivery of following GI pipes and specials confirming to IS 554/86 GI pipes IS 1239/1990 part I required

a. 50mm GI pipe medium (B class)

b. 50mm GI Bend

c. 50mm GI Flange set

d. 50mm GI Elbow

e.50mm MS clamp set

f. 50mm GM Non Return valve

g. 50mm GI coupling

h. 4.00 sqm insulated and Sheathed 3-Core Flat Type Copper Cable conforming to to IS 694/1990

i. Fuse carrier 32A, 415V

j. 40A FP isolator (MCB)

k. TW plank of size 600mm x 450mm x 19mm with support in greeper sof 1"thick on both side with painting and with bolt, nut and washer, etc., complete.

l. Earth with link (1" x 1/8") copper flat

m. 90mm dia PVC pipe 6 ksc

n. 90mm dia PVC Equal TeeFabricated BIS 10124/1982 PartV 6 KSC

o. 90mm dia PVC FTA

p. 50mm x 80mm dia GI Reducer

q. 200mm Dia. MS Borewell Cover Plate.

Labour charges for the erection of 10Hp submersible pumpset in orewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete.

Supply and fixing of 32A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only S.D 144.\

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

A). Pipe Line Trench

b). For Foundation

Cement concrete 1:4:8 (One cement four sand and eight aggregate ) using 40mm ISS size hard broken granite metal for foundation and flooring including de-watering wherever necessary and laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications

Steel centering for sides and soffits including supports and strutting upto 3.00 M height for Retaing wall, SWD wall sies etc; with all cross bracibngs using mild steel sheets of size 90cmx60 cmx 10 gauge stiffend with welded mils dteel angels of size 25mm x 25mm x 6mm for boarding laid over silver oak (country wood) joists of size 10 cmx6.5 spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at 75 cm centre to centre etc; complete.

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc., Complete complying with standard specification.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications. TNDSS NO: 24V, VI (S2) V,VI (S5A) VII

Supplying and Filling of Well Gravel from approved quarry in Layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per Standard Specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supply and delivery of following PVC pipes and specials confirming to IS 554/86 GI pipes IS 1239/1990 part I

a). 63mm OD PVC Pipe of 6Ksc

b). 63mm OD PVC Bend of 6Ksc

c). 63mm OD PVC Tee of Fabricated BIS 10124/1982 PartV 6 KSC

d). 63mm OD PVC Elbow of 6Ksc, (Mould) BIS 7834/1975 Part VI

i). 20mm x 32mm Dia. G.I. Nipple

j). 20mm Dia. G.I. Coupling

k). 20mm Dia. PVC Tap

l). PVC Adhesive (Solution)

Lowering PVC / GI Pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and tasting to the required pressure including conveyance of water for filling during testing etc. complete as per standard specification.

a). 63mm OD PVC Pipe of 6Ksc

b). 90mm OD PVC Pipe

Supply and delivery and fixing of 2000 Litter HDPE Tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete.

Refilling the excavated earth into pipe line trench in layer by layer, each layer not exceeding 15cm thick, including laboure charges for filling, watering, ramming etc., complete as per standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply and run of 4 x 4sq.mm ( 56/0.3 ) PVC insulated SC Unsheathed Cu. Conductor of 1100v grade on 7/20 GI Bearer wire for Over Head Service connection mains. SD. 67

Supply and run of 4 x 4sq.mm. (56/0.3 ) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class'B') suitably bent at both end swith necessary angle iron upright and end supports for mains. SD 72.

Supply and Delivery of 50mm thick, 900mm Dia. RCC 1:2:4 ( One Cement two Sand and Four Aggregate using 12mm ISS HBG metal ) pre-cast Collar of 300mm height with necessary reinfocement, including cost of mould, all laboure charges, etc., Complete.

Supply and Delivery of 50mm thick, 900mm Dia. RCC 1:2:4 ( One Cement two Sand and Four Aggregate using 12mm ISS HBG metal ) pre-cast Cover slab with necessary reinfocement, including cost of mould, all laboure charges, etc., Complete.

Supply and Fixing of GI sheet Cover Box with locking arrangements etc., complete

T RAJU WORKS CONTRACTOR (BID ID -733757)