21/EDC(BLP)/2024-25

Amount

Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, Shrawasti/Bahraich to the work site/dump site (Distance up to 70 km)

PCC Poles (8.5 mtr long)

ACSR Weasel Conductor

ABC 3X50+1X35+1X16 sq.mm

11 KV cable Al. 3x300sq.mm. XLPE.

11 KV cable Al. 3x185sq.mm. XLPE.

11 KV cable Al. 3x120sq.mm. XLPE.

11 KV cable jointing kit 3x300sq.mm. XLPE.(I/D)

11 KV cable jointing kit 3x300sq.mm. XLPE.(O/D)

11 KV cable jointing kit 3x185sq.mm. XLPE.(I/D)

11 KV cable jointing kit 3x185sq.mm. XLPE.(O/D)

Distribution BOX.

100 KVA T/F

63 KVA T/F

25 KVA T/F

Other line materials

Erection of single PCC Poles (8.5 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site

Erection of sectional double pole sectional PCC pole (8.5 mtr long PCC Pole) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site.

Pipe Earthing :- 40' depth bore Type earthing with all material provided by the contractor(Pipe 40' lenth with 2" dia & MS Strip etc.) (100,250,400 T/F) (Body+Nutral)

Earthing of Transformer MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor(control pannel,VCB,S/s/power T/f).

Earthing of PCC poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Grouting of PCC Pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All material would be provided by the contractor.

Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)

Laying, Stringing & Sagging of ABC Cable up to proper sag for the 3X50+1X35+1X16 sq.mm

Laying of 11 KV cable Al. 3x300sq.mm. XLPE.

Laying of 11 KV cable Al. 3x185sq.mm. XLPE.

Laying of 11 KV cable Al. 3x120sq.mm. XLPE.

Fixing of 11 KV cable jointing kit 3x300sq.mm. XLPE.(I/D)

Fixing of 11 KV cable jointing kit 3x300sq.mm. XLPE.(O/D)

Fixing of 11 KV cable jointing kit 3x185sq.mm. XLPE.(I/D)

Fixing of 11 KV cable jointing kit 3x185sq.mm. XLPE.(O/D)

Mounting and fixing of L.T. Distribution Box alongwith fitting of all accessories.

Road retoration for pakka road crossing

Road restroration for footpath side.

Repairing of T/F plinth with all material provided by the contractor. As per RESSPO norms.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories.

100 KVA T/F

63 KVA T/F

25 KVA T/F

Dismounting of 25 KVA T/F capacity of T/F from double pole safly and safe cartage of T/F from work to Electricity Store Centre, Balrampur with loading & unloading.

Making of Foundation & Structure for 33 KV fuse set.

Scrap of Isolator/VCB/control pannel/conductor from work site to ESC, Shrawasti.

Decentralized materials:-Providing and fixing of following materials as per sanctioned Estimate/Package as per RESSPO U.P.P.C.L. drawing/ norms.(where is required).

G.I. Pipe Dia 6"

Dropper angle.

LT PVC cable Al 1x240sq.mm.

LT PVC cable Al 1x440sq.mm.

Top/T-off & others Holding clamp with Nuts & Bolt.

LT Rod 250/400sq.mm.

Oil seal.

Packing

LT crimping thimbleb lug 400/630sq.mm.

L/z copper clmap (thiknes of 5mm & length 300 mm)

11KV fuse set

LT fuse uit set (I/c&O/c)

fuse wire 20swg/18swg/16swg.

fuse wire 12swg/10swg/8swg.

Dead end clamp

Suspension clamp

Nuts & Bolt.

F-Bracket with nut Bolt.

Sub Station Base

Copper L-Piece appropriate size

Alluminium lug Sutaible for Transformer

X-arm Clamp

LT clamp.

G.I. Pipe 1.5"dia

G.I. Strip.

G.I. Pipe cap/

G.I. Pipe socket.

11 KV TPMO.

FRP fencing (6feet. Height)

HT Tape

PVC Tape

clamp with nuts & bolts.

4 core LT MCB

MS channel 125x65x6 length 4mtr. Long

MS channel 65x65x6 length 4mtr. Long

Cross Bracing angle.

Danger Plate

Barbed wire

Ms Agarwal Electric Traders

SHRIMATI RUPWATI CONTRACTOR

R.S. INDUSTRIAL WORKS