REPAIR MAINTENANCE OF SUB MAIN WIRING, POINT WIRING, DISTRIBUTION BOARDS, MCB AND OTHER CONNECTED WORKS OF VARIOUS OR AND JCOs MD ACCN AND OTM ACCN AT DINJAN UNDER GE DINJAN

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down sub main wiring/ service connections of any size with conduit/ casing caping complete including removal from site and making good disturbed surface of walls/floors etc complete all as specified and directed.

Materials and labour for Point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid casing caping (medium grade) with all fittings & accessories including provn of MS sunk terminal box of minimum thickness 1.6 mm fixed flush to wall for mounting switch, socket, fan regulator etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan Point / complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item No.3 above but for One 2/3 pin socket outlet 5/6Amps on independent board

All as per Item No.3 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.

All as per Item No.3 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

Materials and labour for concealed Point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan Point / call bell controlled by one switch one way 5 Amps complete all as specified and directed . NOTE : Cost of cutting, chieseling, and making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates..

All as per Item No.07 above but for One 2/3 pin socket outlet 5/6Amps on independent board

All as per Item No.07 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.

All as per Item No.07 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

S&F Switch piano, flush type, single pole, one way switch 5 Amps. (Note :- switches to be used both for new point wiring and old switch boxes of existing wiring)

S&F Socket outlet 5 in 1, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.

S&F Switch socket combination 3/5 pin, 2 in 1, 5 Amps flush type, 240 volts, complete all as specified all as directed. .

S&F Switch socket combination multipurpose 3/5 pin, 5 A /16 Amps, 5 in 1, flush type, 240 volts, complete all as specified all as directed. .

S&F Ceiling rose surface PVC, 3 terminals 25x50mm all as directed.

S&F Bell Push Flush type 5 Amp, 240 volts, complete all as specified all as directed.

S&F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including fixing for one 9 Watt LED Lamp complete all as specified and as directed.

S&F LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete technical.

S&F 12 Watt LED surface mounted down light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mounted complete all as specified and as directed.

S&F 15 Watt surface mounted down light 1x1 feet, white powder coated, PDC heat sink having high efficiency, polycarbonate housing, aestthetically designed 1x1 feet LED flat panel for surface mountingcomplete all as specified and as directed.

S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having BOTTOM OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed.

S&F 9/10 Watt surface and wall mounted LED Battern with CRCA housing and intigrated items complete all as specified and as directed.

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed.

S&F in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep,complete all as specified and as directed

M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed on surface of wall/ceiling etc with all necessary fittings and accessories and one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 2.5 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 2.5 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for submain wiring comprising single core ,4 Runs of 10 sqmm nominal cross sectional area,FR-LSH multimultistranded copper conductor cable as per IS 694:2010,ISI marked ,annealed,multistranded copper conductot drawn through and including medium mechanical stress class pvc conduit as per IS 9537:(Part-III) : 1983 of suitable size as per required at site dia but not less than 20 mm nominal size including provision of 2X6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and as directed. Note :- (i) Extra length of cables/ wire required for connection to MCBs/DB's shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. (ii) Cost of cutting chase and making good shall be included in the quoted rate.

M&L for sub main wiring with four run of 6 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC conduit of suitable size, surface/concealed etc including provision of 2x4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) Extra length of cables/wire required for connectionto MCBs/DBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. (b) For concealed wiring cutting chases, chipping and plastering shall be measured and paid separately under relevant items.

S&F in repairs switch piano, flush type, 5 Amps, single pole, one way, bearing ISI marked 240 Volts complete all as specified and as directed.

S&F in repair socket outlet, 3/5 pin , 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 5 pin, 5 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin, 6/16 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repair ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F in repairs bell push, flush type, 5 Amps 230 Volts bearing ISI marked complete all as specified and as directed.

S&F in repairs call bell , AC 230 Volts, single pole all as specified and as directed.

S&F in repair stepped type (five steps), electronic fan regulator, flush type (socket type) complete all as specified and as directed.

S&F sheet metal enclosure TPN board distribution (DB) having facility to fix MCCB in incomer and MCBs in outgoing, TPN 4 ways, IP-43 with metal door type complete fitted with bus bars , neutral links, blanking plates including making dgood disturb surface, including taking down old unserviceble MCB DB complete all as specified and as directed.

S&F MCB distrubution board TPN 4 way double door, sheet steel, phosphatised, powder coated with 200 amps Copper bus-bar, neutral link, earth bar and din rail, 415 V, complete all as specified and directed. by Engineer-in-charge.

S&F MCB distrubution board SPN 8 way double door, sheet steel, phosphatised,powder coated with 200 amps Copper bus-bar, neutral link,earth bar and din rail 240 V , complete all as specified and directed. by Engineer-in-charge.

S&F MCB distrubution board SPN 4 way double door, sheet steel, phosphatised, powder coated with 200 amps Copper bus-bar, neutral link, earth bar and din rail 240 V , complete all as specified and directed. by Engineer-in-charge.

S&F MCB distrubution board SPN 2 way single door, sheet steel, phosphatised, powder coated with 200 amps Copper bus-bar, neutral link, earth bar and din rail 240 V , complete all as specified and directed. by Engineer-in-charge.

S&F MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

S&F MCB Single pole, 240 volts 40 to 63 Amps 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

S&F MCB Single pole and neutral, 6 to 32 Amps, 240 volts 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

S&F in repair MCB, four pole, 415 Volts, 63 Amps, breaking capacity 10 KA complete all as specified and as directed.

S&F in repair modular switch one way 6 Amps 230 volts,1 module all as specified and as directed by the Engineer in charge

S&F in repair modular switch one way with indicator 16 Amps 230 volts,1 module all as specified and as directed by the Engineer in charge

S&F in repair modular socket 2 in 1, 2/3 pin ,6 Amp all as specified and as directed by the Engineer in charge.

S&F in repair modular socket 6 A/16 A, 2/3 Pin combined 2 module in existing location, complete all as specified and as directed.

S&F in repair modular electronic step regulator (speed regulation in 5 steps) 1module suitable for ceiling fan 1200 sweep/1400 mm, 100 Watt complete.

S&F in repairs LED wall bracket light asthetically designed with B22d & E27 lamp holder made up of polycarbonate, suitable for 9/10 including suitable LED bulb complete with all accessories including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings and taking down old light fittings of any type complete all as specified and dierected.

S&F in repairs 10 Watt recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting/opening of ceiling any type & fixing arrangement for light fitting complete all as specified and as directed.

S&F invertor type LED batten (4 ft) made of aluminium housing with PC glosy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hour at L70 and should have a colour temprature of 6500K, CR-80. THD 10% and PF>0.95 complete all as specified and as directed, Make : Phillips/Crompton/Havells or equivalent.

S&F invertor type LED batten (2 ft) made of aluminium housing with PC glosy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 9/10 watt including driver. It has a rated system life time of 40000 burning hour at L70 and should have a colour temprature of 6500K, CR-80. THD 10% and PF>0.95 complete all as specified and as directed, Make : Phillips/Crompton/Havells or equivalent..

S&F in repairs 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having BOTTOM OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed.

S&F in repairs 12 Watt LED surface mounted down light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency round including taking down unserviceable light fitting complete all as specified and as directed.

S&F in repairs recess mounted deep drawn PLANO size (2 ft x 2 ft) CRCA housing with higher power 42 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed.

S&F in repairs recess mounted deep drawn PLANO size (1 ft x 4 ft) CRCA housing with higher power 32 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed.

S&F in repairs recess mounted deep drawn PLUTO size (1 ft x 1 ft) CRCA housing with higher power 15 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed.

S&F in repair MCCB of four pole type, 160 Amps current capacity, thermal magnetic, type, 36 KA breaking capacity, 415 Volts complete all as specified and as directed.

S&F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps rating, 240 Volt, complete all as specified and as directed.

S&F in repair for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including fixing for one 9 Watt LED Lamp complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 250 mm x 200 mm x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 175 x 100 x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 100 x 100 x 3 mm complete all as specified and as directed.

S&F in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw including removing the existing old unserviceable one complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed.

S&F in repairs 7 W LED (Muzris) wall mounting fitting with flexible neck for adjusting bean, with bronze finished (Warm white) complete all as specified and as directed.

S&F in repairs 5-7 Watt recessed mounted LED step light (Rozer), aesthetically designed high grade aluminium die cast housing with inbuilt driver, IP 54 protection complete all as specified and as directed.

STANDARD ELECTRIC WINDERS (BID ID -3378451)

FREEZCON (BID ID -3376976)

G.S. ENTERPRISE (BID ID -3377909)

M/S CHANDAN ENTERPRISE (BID ID -3373552)

R D Enterprises (BID ID -3378064)

gitu gohain (BID ID -3378057)

Bimal Trading Company (BID ID -3378336)